• 한국조경학회지
• /
• 제38권5_2호
• /
• pp.194-205
• /
• 2010

To predict urban growth according to changes in landcover, probability factors werecal culated and mapped. Topographic, geographic and social and political factors were used as prediction variables for constructing probability maps of urban growth. Urban growth-related factors included elevation, slope, aspect, distance from road,road ratio, distance from the main city, land cover, environmental rating and legislative rating. Accounting for these factors, probability maps of urban growth were constr uctedusing frequency ratio (FR) and logistic regression (LR) methods and the effectiveness of the results was verified by the relative operating characteristic (ROC). ROC values of the urban growth probability index (UGPI) maps by the FR and LR models were 0.937 and 0.940, respectively. The LR map had a slightly higher ROC value than the FR map, but the numerical difference was slight, with both models showing similar results. The FR model is the simplest tool for probability analysis of urban growth, providing a faster and easier calculation process than other available tools. Additionally, the results can be easily interpreted. In contrast, for the LR model, only a limited amount of input data can be processed by the statistical program and a separate conversion process for input and output data is necessary. In conclusion, although the FR model is the simplest way to analyze the probability of urban growth, the LR model is more appropriate because it allows for quantitative analysis.

• 한국컴퓨터정보학회논문지
• /
• 제28권8호
• /
• pp.119-126
• /
• 2023

본 연구에서는 한국프로야구에서 수비수의 수비 능력을 객관적으로 평가하기 위한 새로운 모델을 제시하였다. 제안 모델에서는 2016년부터 2019년까지 한국프로야구 경기 데이터를 이용하여 구단, 수비 포지션별로 대표 수비수를 선정하여 수비 능력을 평가하였다. 수비력을 평가하기 위하여 포지션별로 수비 범위를 계산하고 계산된 수비지역을 분할하는 방법은 제안하였다. 포지션별 수비 범위는 같은 포지션의 수비수들이 타구를 아웃시킨 지점을 기준으로 컨벡스 헐(Convex Hull) 알고리즘을 이용하여 계산하였다. 포지션별 수비 범위를 이용하여 내야수, 외야수 모두에 대한 아웃전환점수, 승리기여점수를 기본 점수로 계산하였다. 또한, 내야수는 병살 점수, 외야수는 추가진루 점수를 따로 계산하여 합산하였다.

• 전자공학회논문지A
• /
• 제33A권11호
• /
• pp.1-9
• /
• 1996

In the following paper, new architectural algorithm of clock and data recovery circuit is proposed for 622.08 Mbps optical communication receiver. New algorithm makes use of charge pump PLL using voltage controlled ring oscillator and extracts 8-channel 77.76 MHz clock signals, which are delayed by i/8 (i=1,2, ...8), to convert and recover 8-channel parallel data from 662.08 Mbps MRZ serial data. This circuit includes clock genration block to produce clock signals continuously even if input data doesn't exist. And synchronization of data and clock is doen by the method which compares 1/2 bit delayed onput data and decided dta by extracted clock signals. Thus, we can stabilize frequency and phase of clock signal even if input data is distorted or doesn't exist and simplify receiver architecture compared to traditional receiver's. Also it is possible ot realize clock extraction, data decision and conversion simulataneously. Verification of this algorithm is executed by DESIGN CENTER (version 6.1) using test models which are modelized by analog behavior modeling and digital circuit model, modified to process input frequency sufficiently, in SPICE.

• 대기
• /
• 제29권1호
• /
• pp.75-86
• /
• 2019

In this paper, we introduce a novel Climate & Environment Database System (CEDS). The CEDS is developed by the National Institute of Meteorological Sciences (NIMS) to provide easy and efficient user interfaces and storage management of climate model data, so improves work efficiency. In uploading the data/files, the CEDS provides an option to automatically operate the international standard data conversion (CMORization) and the quality assurance (QA) processes for submission of CMIP6 variable data. This option increases the system performance, removes the user mistakes, and increases the level of reliability as it eliminates user operation for the CMORization and QA processes. The uploaded raw files are saved in a NAS storage and the Cassandra database stores the metadata that will be used for efficient data access and storage management. The Metadata is automatically generated when uploading a file, or by the user inputs. With the Metadata, the CEDS supports effective storage management by categorizing data/files. This effective storage management allows easy and fast data access with a higher level of data reliability when requesting with the simple search words by a novice. Moreover, the CEDS supports parallel and distributed computing for increasing overall system performance and balancing the load. This supports the high level of availability as multiple users can use it at the same time with fast system-response. Additionally, it deduplicates redundant data and reduces storage space.

• 항공우주시스템공학회지
• /
• 제17권1호
• /
• pp.79-87
• /
• 2023

항공기의 비행 제어법칙을 설계하기 위해서는 정확한 항공기 운동모델이 요구되며, 이를 구축하기 위한 공력 데이터베이스(DB)를 획득하는 데는 일반적으로 많은 횟수의 풍동시험을 수행해야 한다. 그러나 유인 항공기의 무인화 과정과 같이, 대상 항공기의 비행시험 데이터가 존재하는 경우, 파라미터 추정기법과 DB튜닝 절차를 통해 항공기 운동모델을 획득할 수 있다. 본 논문에서는 KC-100 항공기의 무인화를 위한 비선형 모델 구축 과정 및 검증 방법에 관해 기술한다. 추정기법 적용의 적합성을 판단하는 비행데이터 유효성 분석 과정과 최대공산 추정법을 사용한 선형모델 추정, 그 결과를 활용하는 공력 DB튜닝 과정과 이를 통해 최종 구축된 비선형 모델에 FFS 기준을 적용한 검증 결과를 제시한다.

• 대한기계학회논문집B
• /
• 제32권11호
• /
• pp.870-877
• /
• 2008

Numerical analysis is applied to model Pt-catalyzed reaction in a micro-scale combustor fueled by butane. The reaction constants of catalytic oxidation are determined from plug flow model with the experimental data. Orders of magnitude between the chemical reaction rate and the mass transfer rate are carefully compared to reveal which mechanism plays a dominant role in the total fuel conversion rate. For various conditions of fuel flow rate and surface temperature, the profiles of Sherwood number are investigated to study the characteristics of the mass transport phenomena in the micro-tube combustor.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.80-84
• /
• 2011

The cycle performance of closed ocean thermal energy conversion (OTEC) system with 50 kW gross power was evaluated to obtain the basic data for the optimal design of OTEC using waste heat such as solar power, discharged heat from condenser of power plant. The basic thermodynamic model for OTEC is Rankine cycle, and the surface seawater and deep seawater were used for the heat source of evaporator and condenser, respectively. The cycle performance such as efficiency, heat exchanger capacity, etc. was analyzed on the variation of temperature increase by waste heat. The cycle efficiency increased and necessary capacity of evaporator and condenser decreased under 50kW gross power with respect to the temperature increase of working fluid. Also, when the temperature increase is about $13.5^{\circ}C$, the heat which can be used is generated. By generator with 0.9 effectiveness under the simulated condition, the cycle efficiency was improved approximately 3.0% comparing with the basic cycle.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1408-1414
• /
• 2018

Recently, as a solution to the problem of maintaining system reliability, stability, and quality occurring worldwide, such as activation of smart grid and recognition of super grid and rapid grid interconnection of renewable energy sources HVDC(High Voltage Direct Current) will appear on the front of the electric power system. These concepts are also very important concepts in HVDC systems. When the HVDC system is linked to the existing power system, it is composed of AC/DC/AC conversion device, and these conversion devices are composed of many thyristors. These parts(Devices) are connected in a complicated manner, and they belong to the one with a higher failure rate. However, the problem of establishing the concept of failure rate of HVDC parts directly linked to economic efficiency and the understanding accompanying it are still insufficient. Therefore, in this paper, we establish the meaning of reliability in power system and try to develop a model to analyze and verify the failure rate data of HVDC based on this.

• 호남수학학술지
• /
• 제44권4호
• /
• pp.572-593
• /
• 2022

Crime committed by civilians and criminals using legal and illegal firearms and conversion of legal firearms into illegal ones has become a common practice around the world. As a result, policies to control civilian gun ownership have been debated in several countries. The issue arose because the linkages between firearm-related mortality, weapon accessibility, and violent crime data can imply diverse options for addressing criminality. In this paper, we have projected a mathematical model in terms of the Caputo fractional derivative to address the issues viz. input of legal guns, crime committed by legal and illegal guns, and strict government policies to monitor the license of legal guns, strict action against violent crime. The boundedness, existence and uniqueness of solutions and the stability of points of equilibrium are examined. It is observed that violent crime increases with the increase of crime committed by illegal guns, crime committed by legal guns and, decreases with the increase of legal guns, the deterrent effect of civilian gun ownership, and action of law against crime. Further, legal guns increase with the increase of the limitation of trade of illegal guns and decrease with the increase of conversion of legal guns into illegal guns and increase of the growth rate of illegal guns. Again, as crime is committed by legal guns also, the policy of illegal gun control does not assure a crime-free society. Weak gun control can lead to a society with less crime. Theoretical aspects are numerically verified in the present work.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1518-1527
• /
• 2023

A method was proposed for in-situ evaluating the thickness and resistivity of the oxide/hydroxide film formed on the surface of aluminum alloy exposed to sump water formed in the containment after a loss-of-coolant accident. The evaluation entailed fitting a model for the film impedance, which has film thickness and other variables describing the resistivity profile of the film along its thickness direction as fitting parameters, to the practically measured electrochemical impedance data. The obtained resistivity profiles implied that the films formed at pHs_25℃ 7, 8, 9, 10, and 11 all had a duplex structure; compared to the outer layer in contact with the solution, the inner layer of the film had a much higher resistivity and was inferred to be denser and provide most of the protectiveness of the film. Both the thickness and the total resistance of the film decreased with the increasing solution pH_25℃, suggesting that the films formed in more alkaline solutions had less protectiveness against corrosion, consistent with the increasing aluminum alloy corrosion rates previously identified.