• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.640-645
• /
• 2006

A 22.9kV/50MVA class high temperature superconducting(HTS) power cable system was developed in Korea. For the optimization of electrical insulation design for a HTS cable, it is necessary to investigate the ac breakdown impulse breakdown and partial discharge inception stress of the liquid nitrogen/laminated polypropylene paper(LPP) composite insulation system. They were used to insulation design of the model cable for a 22.9kV class HTS power cable and the model cable was manufactured. The insulation test of the manufactured model cable was evaluated in various conditions and was satisfied standard technical specification in Korea. Base on these experimental data, the single and 3 phase HTS cable of a prototype were manufactured and verified.

• Journal of Radiation Protection and Research
• /
• v.22 no.1
• /
• pp.47-58
• /
• 1997

The conversion coefficients of effective dose per unit air kerma and equivalent dose per unit fluence were calculated by MCNP4A code for antero-posterior(AP) and postero- anterior(PA) incidence of broad, unidirectional beams of photons into anthropomorphic MIRD phantom. Calculations have been performed for 20 monoenergetic photons of energy ranging from 0.03 to 10 MeV. The conversion coefficients showed a good agreement with the corresponding values given in the draft publication of joint task group of ICRP and ICRU within 10%. The deviations may arise from the differences of geometry in the MIRD phantom and the ADAM/EVE phantoms, and the differences in the codes and cross-section data used. Inclusion of a specific oesophagus model results in effective dose slightly different(5% at most) from the effective doses obtained by adopting the equivalent doses for the thymus or pancreas. Deletion of the ULI from the remainder organ appeared not to be significant for the cases of photon dosimetry covered in this study.

• The Journal of Society for e-Business Studies
• /
• v.8 no.1
• /
• pp.85-102
• /
• 2003

Nowadays an information exchange on XML such as B2B electronic commerce is spreading. Therefore the systematic and stable management mechanism for storing the exchanged information is needed. For this goal there are many research activities for connection between XML application and relational database. But because XML data have hierarchical structures and relational database can store only flat-structured data, we need to make the conversion rule which changes the hierarchical architecture to 2-dimensional information. Accordingly the modeling methodology for storing each structured information in relational database is needed. In this paper, we introduce a XML modeling methodology to design W3C XML schema using UML and we propose a unified design methodology for relational database schema to store XML data efficiently in relational databases. In the second place, in order to verify objectivity of a unified design methodology. By the way of Ronald Bourret, First we introduce the method of the transformation from XML schema to object model and second we translate object model into relational database schema. Therefore we show the mutual consistency between those consequence, and so can verify a unified design methodology.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.785-796
• /
• 2009

A KALIMER-600 concept which is a type of sodium-cooled fast reactor, has been developed at KAERI. It uses sodium as a primary coolant and is a pool-type reactor to enhance safety. Also, a supercritical carbon dioxide ($CO_2$) Brayton cycle is considered as an alternative to an energy conversion system to eliminate the sodium water reaction and to improve efficiency. In this study, a simplified model for analyzing the thermodynamic performance of the KALIMER-600 coupled with a supercritical $CO_2$ Brayton cycle was developed. To develop the analysis model, a commercial modular modeling system (MMS) was adopted as a base engine, which was developed by nHance Technology in USA. It has a convenient graphical user interface and many component modules to model the plant. A new user library for thermodynamic properties of sodium and supercritical $CO_2$ was developed and attached to the MMS. In addition, some component modules in the MMS were modified to be appropriate for analysis of the KALIMER-600 coupled with the supercritical $CO_2$ cycle. Then, a simplified performance analysis code was developed by modeling the KALIMER-600 plant with the modified MMS. After evaluating the developed code with each component data and a steady state of the plant, a simple power reduction and recovery event was evaluated. The results showed an achievable capability for a performance analysis code. The developed code will be used to develop the operational strategy and some control logics for the operation of the KALIMER-600 with a supercritical $CO_2$ Brayton cycle after further studies of analyzing various operational events.

• Korean Journal of Social Welfare Studies
• /
• v.44 no.2
• /
• pp.327-358
• /
• 2013

This study aimed to analyze the trajectories of cognitive function and functional disability, and to identify the impacts of socio-demographic factors on the two variables. Based on the assumption that there are differences according to the progress of cognitive impairment, it focused on examining the differences in trajectories of cognitive function and functional disability between two groups: dementia conversion group and dementia non-conversion group among cognitively normal older adults. This study was conducted based on the data from a 3-wave panel study of a sample of 966 Yeoncheon elderly cohort aged 65 and over between 1997 and 2003. Latent growth curve model and multi-group structural equation modeling were used to examine the hypothesis. Results revealed that dementia conversion group exhibited faster rate of cognitive decline as well as lower initial cognitive level. Difference between two groups was not significant in the initial level of functional disability, yet dementia conversion group showed greater degree of deterioration in the functional disability over time than dementia non-conversion group did. In terms of the influence of socio-demographic factors on cognitive function and functional disability, the cognitive decline was more drastic in the female group, whereas functional decline was more apparent for the male group. The level of education in early life had a strong impact on the cognitive function in later life. Based on these findings, practical implication for high risk groups in cognitive function and functional disability were discussed.

• Clean Technology
• /
• v.21 no.1
• /
• pp.53-61
• /
• 2015

In this study, we have investigated the kinetics on the char-CO₂ catalytic gasification reaction. Thermogravimetric analysis (TGA) experiments were carried out for char-CO₂ catalytic gasification of an Indonesian Kideco sub-bituminous. Na₂CO₃ and K₂CO₃ were selected as catalysts which were physically mixed with coal. The char-CO₂ catalytic gasification reaction showed a rapid increase of carbon conversion rate at 850 ℃, 60 vol% CO₂, and 7 wt% Na₂CO₃. At the isothermal conditions ranging from 750 ℃ to 900 ℃, the carbon conversion rates increased as the temperature increased. Four kinetic models for gas-solid reaction including the shrinking core model (SCM), random pore model (RPM), volumetric reaction model (VRM), and modified volumetric reaction model (MVRM) were applied to the experimental data against the measured kinetic data. The gasification kinetics were suitably described by the MVRM for the Kideco sub-bituminous. The activation energies for each char mixed with Na₂CO₃ and K₂CO₃ were found 55-71 kJ/mol and 69-87 kJ/mol.

• Journal of Animal Science and Technology
• /
• v.62 no.5
• /
• pp.628-637
• /
• 2020

In poultry diets, a requirement of crude protein is one of the most important factors in poultry productivity. Besides, the Pekin duck requirement of crude protein is still not clear. This experiment was conducted to determine the crude protein requirement of Pekin duck on diet formulation by investigation of growth performance, carcass trait, and analysis of blood parameter for a hatch to 21-day (d) of age. A total of 432 male White Pekin ducks were randomly allocated to six levels of crude protein (i.e., 15%, 17%, 19%, 21%, 23%, and 25%) to give six replicate pens per treatment with 12 ducklings per each pen. Body weight and feed intake were measured weekly by calculating feed conversion ratio and protein intake. Two ducklings each pen was euthanized via cervical dislocation for analysis of carcass trait and plasma blood on 21-d of age. Data were applied on both prediction linear-plateau and quadratic-plateau models by estimation of the crude protein requirements. Data were applied on both prediction linear-plateau and quadratic-plateau models by estimation of the crude protein requirements. The level of crude protein requirements of Pekin ducks for 21 days after the hatch was estimated to be 20.63% and 23.25% diet for maximum daily gain, and minimum feed conversion ratio, respectively.

• The KIPS Transactions:PartD
• /
• v.17D no.5
• /
• pp.327-336
• /
• 2010

This paper proposed software equation that is relation with effort and duration based on function point (FP) software size. Existent software equation based on lines of code (LOC). LOC sees big difference according to development language and there are a lot of difficulties in software size estimation. First, considered method that change LOC to FP. But, this method is not decided definitely conversion ratio between LOC and FP by development language. Also, failed though the conversion ratio motives software formula because was not presented about specification development language. Therefore, we derived software formula directly to large project data that was developed by FP. Firstly, datas that reasonable development period is set among development projects. Secondly, FP through regression analysis about this data and effort, motived relation with FP and duration. Finally, software equation was derived from these relation. Proposed model solves application problems that LOC-based model has and has advantage that application is possible easily in business.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.81-88
• /
• 2021

Convertible bonds are financial products that contain the nature of both bonds and shares, which are generally issued by companies with lower credit ratings to increase liquidity. Conversion bonds rely on qualitative judgment in the past, although decision-making on whether and when to exercise the right to convert is the most important issue. Therefore, this paper proposes to apply artificial neural network techniques to scientifically determine the exercise of conversion rights. We distinguish between a total of 1,800 learning data published in the past and 200 predictive experimental data and build an artificial neural network learning model. As a result, the parity performance in most groups was excellent, achieving an average excess of about 10% or more. In particular, groups 3-6 recorded an average excess of about 20% and group 6 recorded an average excess of about 37%. This paper is meaningful in that it focused on solving decision problems by converging and applying machine learning techniques, a representative technology of the fourth industry, to the financial sector.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.204-209
• /
• 2012

In this study, kinetics data was obtained for steam reforming reaction of ethane over the commercial ruthenium catalyst. The variables of ethane steam reforming were the reaction temperature, partial pressure of ethane, and steam/ethane mole ratio. Parameters for the power rate law kinetic model and the Langmuir-Hinshelwood model were obtained from the kinetic data. Also, sizing of steam reforming reactor was performed by using PRO/II simulator. The reactor size calculated by the power rate law kinetic model was bigger than that of using the Langmuir-Hinshelwood model for the same conversion of ethane. Reactor size calculated by the Langmuir-Hinshelwood model seems to be more suitable for the reactor design because the Langmuir-Hinshelwood model was more consistent with the experimental results.