• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6860-6868
• /
• 2015

In this study, we consider a problem of forecasting daily city gas demand of Korea. Forecasting daily gas demand is a daily routine for gas provider, and gas demand needs to be forecasted accurately in order to guarantee secure gas supply. In this study, we analyze the time series of city gas demand in several ways. Data analysis shows that primary factors affecting the city gas demand include the demand of previous day, temperature, day of week, and so on. Incorporating these factors, we developed a multiple linear regression model. Also, we devised a sampling procedure that selectively collects the past data considering the characteristics of the city gas demand. Test results on real data exhibit that the MAPE (Mean Absolute Percentage Error) obtained by the proposed method is about 2.22%, which amounts to 7% of the relative improvement ratio when compared with the existing method in the literature.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.530-532
• /
• 2002

The contracted electric power and the demand factor of customers are used to predict the peak load in distribution transformers. The conventional demand factor was determined more than ten years ago. The contracted electric power and power demand have been increased. Therefore, we need to prepare the novel demand factor that appropriates at present. In this paper, we modify the demand factor to improve the peak load prediction of distribution transformers. To modify the demand factor, we utilize the 169 data acquisition devices for sample distribution transformers. The peak load currents were measured by the case studies using the actual load data, through which we verified that the proposed demand factors were correct than the conventional factors. A newly demand factor will be used to predict the peak load of distribution transformers.

• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.627-640
• /
• 2018

Submetering electricity consumption data enables more detail input of end use components, such as lighting, plug, HVAC, and occupancy in building energy modeling. However, such an modeling efforts and results are rarely tried and published in terms of the estimation accuracy of electricity demand. In this research, actual submetering data obtained from a university building is analyzed and provided for building energy modeling practice. As alternative modeling cases, conventional modeling method (Case-1), using reference schedule per building usage, and main metering data based modeling method (Case-2) are established. Detail efforts are added to derive prototypical schedules from the metered data by introducing variability index. The simulation results revealed that Case-1 showed the largest error as we can expect. And Case-2 showed comparative error relative to Case-3 in terms of total electricity estimation. But Case-2 showed about two times larger error in CV (RMSE) in lighting energy demand due to lack of End Use consumption information.

• Economic and Environmental Geology
• /
• v.41 no.5
• /
• pp.509-516
• /
• 2008

For analyzing resources demand appropriately, corresponding demand data is essential. But it is hard to get the suitable data of each resource demand, because every resources has various type as refined and many kind of alloyed. That reason makes many analyses to employ the data of refined metals as the representative quantity. But those refined metals are factors for producing final goods so those in domestic market are not always meant for producing domestic end goods. Thus in this paper, the domestic demands of refined copper, lead and zinc are analyzed empirically with 'intensity of use' and foreign countries' income variable applied model for recovering the data availability.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.127-133
• /
• 2019

Electric power demand forecasting is one of the important research areas for future smart grid introduction. However, It is difficult to predict because it is affected by many external factors. Traditional methods of forecasting power demand have been limited in making accurate prediction because they use raw power data. In this paper, a probability-based CRBM is proposed to solve the problem of electric power demand prediction using raw power data. The stochastic model is suitable to capture the probabilistic characteristics of electric power data. In order to compare the mid-term power demand forecasting performance of the proposed model, we compared the performance with Recurrent Neural Network(RNN). Performance comparison using electric power data provided by the University of Massachusetts showed that the proposed algorithm results in better performance in mid-term energy demand forecasting.

• Journal of Korean Society for Quality Management
• /
• v.50 no.3
• /
• pp.349-371
• /
• 2022

Purpose: Compared to the rapid growth rate of the domestic automotive LED industry so far, the predictive analysis method for demand forecasting or market outlook was insufficient. Accordingly, product characteristics are analyzed through the life trend of LEDs for automotive exterior lamps and the relative strengths of p and q using the Bass model. Also, future demands are predicted. Methods: We used sales data of a leading company in domestic market of automotive LEDs. Considering the autocorrelation error term of this data, parameters m, p, and q were estimated through the modified estimation method of OLS and the NLS(Nonlinear Least Squares) method, and the optimal method was selected by comparing prediction error performance such as RMSE. Future annual demands and cumulative demands were predicted through the growth curve obtained from Bass-NLS model. In addition, various nonlinear growth curve models were applied to the data to compare the Bass-NLS model with potential market demand, and an optimal model was derived. Results: From the analysis, the parameter estimation results by Bass-NLS obtained m=1338.13, p=0.0026, q=0.3003. If the current trend continues, domestic automotive LED market is predicted to reach its maximum peak in 2021 and the maximum demand is $102.23M. Potential market demand was $1338.13M. In the nonlinear growth curve model analysis, the Gompertz model was selected as the optimal model, and the potential market size was $2864.018M. Conclusion: It is expected that the Bass-NLS method will be applied to LED sales data for automotive to find out the characteristics of the relative strength of q/p of products and to be used to predict current demand and future cumulative demand.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.41-46
• /
• 2014

Bus service is easily adjusted to accommodate the changed demand. Despite the flexibility of that, its relocation should overcome the following problems: first, Bus line rearrangement should consider the balance between the demand and the supply to enhance the transit equity among the users scattered around the area that supply against demand imbalances. Second, the existing demand analysed is to crude since the demand was analysed based on TAZ. mainly based on the Dong unit. Utilization of the GWR and GIS-T data can resolve the problem. In this paper, the limitation of the conventional transit demand analysis model is overcome by deploying the GWR model which identifies the transit demand based on the geographic relation between the service location and those of the users. GWR model considers the spatial effect of the bus demand in accordance with the distance to the each bus stops using SCD(Smart Card Data) and BIS(Bus Information System). This demand map was then superimposes with the existing bus route which identified the areas where the balance between demand and supply is severly skewed. since the analysis was computed with SCD and BIS at every bus stops. the shortage and surplus of bus service of entire study area could computed. Further. based on this computational result and considering the entire bus service capacity data. Bus routes optimization from the oversupplied areas to the undersupplied area was illustrated thus this study clearly compared the benefits the GIS.

• Journal of Environmental Impact Assessment
• /
• v.32 no.1
• /
• pp.29-40
• /
• 2023

The need for improvement is raised due to limitations with environmental impact assessment, and the importance for data-based environmental impact assessment is increasing. In this study, data demand was derived by analyzing Agreed Terms and Conditions in the Water Environment field (Water Quality, Hydraulic & Hydrologic Conditions, and Marine Environment) of environmental impact assessment. Agreed Terms and Conditions on environmental impact assessment in the water environment field were classified and categorized by environmental impact assessment stage (addition to status survey, impact prediction and evaluation, establishment of reduction measures, post-environmental impact survey), and data demand for each type of consultation opinion was linked. As a result of the categorization of Agreed Terms and Conditions, it was classified into 18 types in the water quality, 15 types in the hydraulic & hydrologic conditions, and 17 types in the marine environment. As a result of linking data demand, the total number of data demand was 236 in the water quality, 98 in the hydraulic & hydrologic conditions, and 73 in the marine environment. The highest number of Agreed Terms and Conditions and data demands were found in the water quality for the evaluation item and establishment of reduction measures, specifically establishment of non-point source pollution reduction measures, for the stage. The numbers were judged to be linked to the relative importance of the items and the primary purpose of environmental impact assessment. The derivation of data demand through the analysis of Agreed Terms and Conditions in the environmental impact assessment can contribute to the advancement of the preparation of environmental impact assessment reports and is expected to increase data utilization by various decision-makers by establishing a systematic database.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.104.1-104
• /
• 2001

This paper presents a technique to development load control and management system in order to limits a maximum load demand and saves electric energy consumption. The computer programming proper load forecasting algorithm associated with programmable logic control and digital power meter through inform of multidrop network RS 485 over the twisted pair, over all are contained in this system. The digital power meter can measure a load data such as V, I, pf, P, Q, kWh, kVarh, etc., to be collected in statistics data convey to data base system on microcomputer and then analyzed a moving linear regression of load to forecast load demand Eventually, the result by forecasting are used for compost of load management and shedding for demand monitoring, Cycling on/off load control, Timer control, and Direct control. In this case can effectively reduce the electric energy consumption cost for 10% ...

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.420-426
• /
• 2009

Although the amount of travel demand is a critical factor in a benefit-cost (B/C) analysis of railway investment, the travel demand changes especially for induced demand have not been considered. Therefore, the basic study of how to estimate travel demand changes after railway investment is worth investigating. This study reviews the methodologies for estimating diverted and induced demand generated after railway investment, and proposes appropriate approaches that will help railway planners to practically apply them in a case study. Further, the research stimulates the needs of consideration of the travel demand changes in the feasibility studies of railway planning.