• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.129-140
• /
• 1998

An interface system was developed to offer the welding capability to a robot controller which had not any embedded function for arc welding before, and also an arc sensor algorithm was proposed for weld seam tracking of the welding robot. For the interface system between the robot controller and welding equipments, data communication software and interface connections were composed. The interface system was mae to correspond welding condition, correction data, operation sequence and current status with the robot controller by mutual had shaking and digital signal transfer. Graphic user interface program developed under the environment of windows made it easy to monitor data communication and operation status, and to control welding and sensing sequence. Arc sensing algorithm proposed in this study to compensate torch position error was based on a fuzzy logic with the variables of current difference and current differenced change at torch weaving extremities. The developed interface system could be successfully implemented in between welding equipments and the robot controller, and showed normal status and exact function in data and signal communication between the systems. The whole robot welding system was then examined to verify its welding and seam tracking capabilities in horizontal fillet, vertical fillet, and 3-dimensional fillet weldment. The experiments revealed sound weld bead shapes and also good seam tracing results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1499-1502
• /
• 2008

This paper proposes an efficient data compression for the conventional method of reducing EMI in a 10 bit LCD timing controller (TCON). In addition, we develop a new method to reduce EMI in a LCD TCON through repeated data on adjacent blocks. The novel technique reduced EMI by 10 dB for a 52" FHD 10it LCD TV.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.419-427
• /
• 2018

This paper designs and develops auto-tuning temperature controller with multi-channel, which controller with multi-channel could control a number of control system simultaneously. This controller has multi-channel input and output. And a number of control algorithms run in this controller simultaneously and independently. Firstly we present design method of controller with multi-channel. Secondly we design electrical circuit of sensor input, controller output and power control for temperature control board. And finally we design data protocol for serial communication to monitor control state and present verification of temperature controller with muiti-channel through field experiment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.2
• /
• pp.178-184
• /
• 2004

In this paper, we designed an image processing system for the high speed line-scan camera which adopts the new memory model we proposed. As a resolution and a data rate of the line-scan camera are becoming higher, the faster image processing systems are needed. But many conventional systems are not sufficient to process the image data from the line-scan camera during a very short time. We designed the memory controller which eliminates the time for transferring image data from the line-scan camera to the main memory with high-speed SRAM and has a dual-port configuration therefore the DSP can access the main memory even though the memory controller are writing the image data. The memory controller is implemented by VHDL and Xilinx SPARTAN-IIE FPGA.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.732-734
• /
• 2000

In this paper, we designed and made an experiment on a general analog data acquistion system. which used $\mu$-controller. Using the general purpose $\mu$-controller and simple algorithm. we could easily acquire the state of physical system and convert analog to digital data which is possible digital processing. Finally, we realized the RS232 serial communication system for more complex data processing from PC.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.101.5-101
• /
• 2001

A linear input/output data-based predictive control with integral action is developed. The control input is obtained directly from the input/output data in a single step. However, the state estimation in subspace identification gives a biased estimate and there is model mismatch when the controller is applied to a nonlinear process. To overcome such difficulties, we add integral action to a linear input/output data-based predictive controller by augmenting the integrated white noise disturbance model and use each of best linear unbiased estimation(BLUE) filter and Kalman filter as a stochastic observer for the unmeasured disturbance. When applied to a continuous styrene polymerization reactor the proposed controller demonstrates.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.233-238
• /
• 2000

CNC machine tool is assembled by central processor, PLC(Programmable Logic Controller), and actuator. The sequential control of machine generally controlled by a PLC. The main fault occured at PLC in 3 control parts. In LC faults, operational fault is charged over 70%. This paper describes diagnosis model and data processing for remote monitoring and diagnosis system in machine tools with open architecture controller. Two diagnostic models based on the ladder diagram. Logical Diagnosis Model(LDM), Sequential Diagnosis Model(SDM), are proposed. Data processing structure is proposed ST(Structured Text) based on IEC1131-3. The faults from CNC are received message form open architecture controller and faults from PLC are gathered by sequential data.. To do this, CNC and PLC's logical and sequential data is constructed database.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2473-2475
• /
• 1998

In this paper, we implemented RS232C serial communication by the 2 wires(Data,GND), and multiple access, by the applying Collision Sensing Multiple Access(CSMA) Protocol. Multiple access is implemented by assigning a unique ID to each controller. The multiple access control operation starts by sending a command packet from a host to another host and the command packet is composed of ID bytes of source and target host computer, data bytes and the check sum, byte. In host computer, after sending command packet, the collision from loop back data. If collision is detected, it means a command packet was collided with another command packet for another host. The packet communication of the controller enables the multiple acces of the controller through the common serial data link. The application of this serial communication through CSMA protocol and the usage of two wires, have an effect on saving the wires and convenient of layout work.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.345-347
• /
• 2006

In this paper, we study the robot controller design using the voice and data communication via CDMA(Code Division Multiple Access) mobile communication network. We design the robot remote controller using the three methods, telephone call speech recognition, DTMF (Dual Tone Multiple Frequency) realization, SMS(Short Message Service) transmission/reception way via CDMA mobile communication network. We investigate the validity and effectiveness of the proposed remote controller which applied to the mobile robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.161.4-161
• /
• 2001

This paper presents adaptive control of robot manipulator using neuro-fuzzy controller Fuzzy logic is control incorrect system without correct mathematical modeling. And, neural network has learning ability, error interpolation ability of information distributed data processing, robustness for distortion and adaptive ability. To reduce the number of fuzzy rules of the FLS(fuzzy logic system), we consider the properties of robot dynamic. In fuzzy logic, speciality and optimization of rule-base creation using learning ability of neural network. This paper presents control of robot manipulator using neuro-fuzzy controller. In proposed controller, fuzzy input is trajectory following error and trajectory following error differential ...