• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.274-279
• /
• 2018

To evaluate the antioxidant activities of Korean and Chinese Torreya seeds, their total phenolic compound content, total flavonoid content, DPPH radical and ONOO-scavenging activities were compared using their water and methanol extracts. The effective compounds were identified and quantitatively analyzed by GC-MS. The DPPH and ONOO-scavenging activities were the highest in the Korean Torreya seeds. After using GC-MS to identify the active compounds, a total of eight compounds were identified in Korean Torreya seeds, and five compounds were found in Chinese Torreya seeds. In conclusion, we could confirm the antioxidant activity and the difference between active compounds of the Korean and Chinese Torreya seeds; we also confirmed the superiority of Korean Torreya seeds. Futhermore, this basic data about the Korean and Chinese Torreya seeds can be provided to consumers, so that they can select proper and suitable functional foods.

• The Journal of the Korean Society for Microbiology
• /
• v.8 no.1
• /
• pp.7-11
• /
• 1973

The authors identified eighty-eight Shigella cultures among about four thousands specimens collected from all over the country in 1972. Of eighty-eight cultures, seventy-seven cultures belonged to Shigella flexneri and eleven cultures to Shigella sonnei. None of cultures belonging to either subgroup A or C was detected in 1972. Of seventy-seven cultures of Shigella flexneri one was $B_{1b}$, fifty-six were $B_{2a}$, nine were $B_{3a}$, six were $B_{4a}$, three were By and one was each of $B_{3b}$ and $B_{3c}$. Of eleven cultures of Shigella sonnei seven cultures appeared to be phase I and the others phase II. Although there was quite a difference found in the incidence of isolating Shigella organisms between different areas as shown in Table 1, it would not be possible to understand that there might not have been the cases or carriers of Shigella in the areas where the organisms were not isolated in 1972. Concerning the biochemical properties it was not possible to compare the results obtained from the decarboxylase and dihydrolase tests with them obtained in previous years except that of lysine decarboxylase tests since they were not reported individually by the different serotypes in the previous reports. These results obtained in 1972 would be the data for the future comparison. In regards to the antibiotics-sensitivity of Shigella cultures the most of them showed sensitive results to nitrofurantoin, ampicillin, cephalosporin, gentamycin and geopen, and the majority of them appeared to be resistant to cloxacillin, tetracycline and streptomycin by means of the In Vitro tests.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.149-155
• /
• 2015

Tooth implant is located in oral cavity and affects neck, skull base, and facail image. These magnetic inhomogeneities are usually frequency encoding direction which cause artifacts due to change of signal strength and geometric distortion. First, to evaluate signal to noise ratio (SNR) of magnetic resonance image caused by tooth implant this study uses meat phantom which is similar to human body and is consisted with fat, muscle, and water to measure signal to noise ratio. Second, signal to noise ratio by using custom-made fixed phantom is measured, and then signal to noise ratio size of different tooth implant types is compared and analyzed. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for meat phantom were 2.76, 2.22, 1.88, and 1.57 on T1 SE, 1.88, 1.78, 1.65, and 1.79 on T2 FLAIR, 2.28, 2.25, 2.88, and 2.05 on T2 FSE, and 2.74, 1.94, 1.67, and 1.48 on T2 GRE. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for fixed water phantom were 1.2, 1.06, 1.12, and 1.22 on DWI, 1.93, 1.87, 1.93, and 2.06 T1 SE, 1.83, 1.76, 1.82, and 1.92 on T2 FLAIR, 1.85, 1.79, 7.86, and 1.97 on T2 FSE, and 1.97, 1.93, 1.99, and 2.06 on T2 GRE. By considering through the results, patients and dentists need to consider some impacts from testing many aspects although their main purpose of having tooth implants is a dental restoration. Moreover, depending on the tooth implant characteristics of individual patients this study results can be used as baseline data when choosing test protocol.

• Korean Journal of Hospice Care
• /
• v.8 no.1
• /
• pp.13-28
• /
• 2008

Purpose: This paper aims to examine the subjective structures and types of school age children's perception of death through an investigative study on their perception of death in order to provide a basic material for them to understand death, and develop and carry out an effective death education program. Methods: The study method used the Q Methodology which can investigate the subjective structures and types of school age children's perception of death. For Q-population, 20 school age children were used as subjects for neutral interviews and open surveys, and through documentary research, a total of 132 statements were collected, For Q-samples, 23 statements (Q-samples) were derived through a non-structural method. P-samples were 31 school age children (8-13 year olds), Q-sorting was carried out using Q-cards, and the collected data was analyzed using the PC QUANL program. Results: As a result of the study, children's perception of death was divided into five types. The first type was functional type, characterized by prominent subjective perception regarding the elements of death, such as non-reversibility, universality, non-functionality, and causality. The second was after-life type, characterized by a strong, focus on life after death in one's perception of death, and it included children with Christian background and those who had experienced death in their immediate family. The third was religious type, characterized by a strong belief in being able to still watch over one's family and friends after one's death, resulting in a positive faith in the after-life. The fourth was fearful type, characterized by a deeper fear of death in comparison to other types. The fifth was realistic type, characterized by a strong and positive assent to the perception of good death. Conclusion: The significance of the results of this paper's study to Nursing is as follows. In terms of understanding the subjectivity of school age children's perception of death in nursing practice, and understanding the compositional elements of death presented with strong emphasis in existing literature and studies, the results will expand these understandings and allow us to understand the level of perception in school age children regarding the definition of death, after-life, and good death, be utilized as useful material in developing an effective death education program for them according to their type characteristics, and become the fertilizer for enabling the children to live a proper life and preventing the tendency to make light of death that occur in adolescence and the spread of suicides. In terms of nursing theory, the description and examination of the subjective structures and the characteristics of the different, types of school age children's perception of death can be utilized as useful material for building a model of school age children's perception of death, and be further used for teaching respect for life. In terms of nursing research, the results can contribute to research describing the effects of nursing intervention strategies and developing tools for providing psychosocial nursing in terms of giving school age children a positive perception of death according to their types as well respect for life.

• Korean Journal of Dental Materials
• /
• v.44 no.1
• /
• pp.61-68
• /
• 2017

This study evaluated the effects of various cleaning methods on the shear bond strength of zirconia ceramics after saliva contamination. Eighty zirconia disk specimens were divided into 8 groups. All groups were treated with one coat of MDP primer. All specimens (except the negative control) were contaminated with human saliva on the zirconia surface. The positive control went through the bonding procedure immediately after contamination without any cleaning procedure. With the exception of control groups, the remaining six groups were rinsed with water and either applied with MDP recoating (WATER+MDP) or without MDP recoating (WATER). While some were cleaned with a Ivoclean with MDP recoating (IVOCLEAN+MDP) or not applied with MDP recoating(IVOCLEAN), others were cleaned with a 1% NaOCl solution with MDP recoating (NaOCl+MDP) or without MDP recoating (NaOCl). The shear bond strength of all specimens were measured after being stored in distilled water at $37^{\circ}C$ for 24 hours. The data was analyzed statistically by an analysis of ANOVA, Tukey's post hoc test and Student's t-test was used to compare the shear bond strength according to the re-coating of MDP after the cleaning procedure. The positive control group showed the lowest shear bond strength value, and the WATER group and NaOCl group showed no significant difference when compared to the positive control group. The IVOCLEAN group showed significantly higher shear bond strength when compared to Water group and NaOCl group but not with the group of negative control. After rinsing with water or the NaOCl solution, the comparison of the single coating of MDP and re-coating of MDP showed different shear bond strengths but there was no significant difference to the negative control. After rinsing with Ivoclean, there was no significant difference to the negative control regardless of the recoating of MDP. In conclusion, the shear bond strength was affected by the cleansing procedure and Ivoclean was found to be effective regardless of the re-coating of MDP. When water or the NaOCl solution is used to remove surface contaminants, the re-coating of MDP provides a positive effect on cementation.

• Journal of agriculture & life science
• /
• v.46 no.5
• /
• pp.73-82
• /
• 2012

Allele information from the analysis of the 13 microsatellite (MS) markers, were classified into the $F_0$, $F_1$ and $F_2$ generations, and probabilities of the same individual emergency in each generation was calculated. As a result, the 13 MS markers showed an estimate of $3.84{\times}10^{-23}$ on the premise of the randomly mated group of $F_2$, which implies that the same individuals may emerge by the use of 37 kinds of SNP markers. In this study, the experimental pigs were intercross between only 2 breeds (Korean native pig and Landrace). In addition, the success rate of paternity tests was analyzed on the whole group, by the use of the 13 MS markers and 37 SNP markers. As regards the exclusionary power of the second parent ($PE_{pu}$), MS markers and SNP markers showed 0.97897 and 0.99149, respectively. In relation to the parent exclusion power of both parent (PE), MS markers and SNP markers showed 0.99916 and 0.99949, respectively. In the case of the estimate to identify parental candidates that had the highest probability ($PNE_{pp}$), the two showed 1.00000 all. The Korean pig industry tends to mass produce hogs with limited numbers of alleles in limited parents. Such being the case, there is a need to organize a marker, for which it is imperative to find markers with high efficiency and high economic feasibility of the characteristics of DNA markers, sample size, the accuracy and expenses of genotyping cost, the manageability of data and the compatibility among analysis systems.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.151-161
• /
• 2017

The purpose of this study was to examine the effect of shade and thickness of resin-nanoceramic CAD-CAM block (RNB) on the microhardness of dual-cured resin cement, as well as to measure the number of photons transmitted through RNBs of different thicknesses and colors. One dual-cured resin cement was used to prepare resin cement specimens. Resin cement specimens were light-cured for 40 seconds through 3 shades (A1, A2, A3 in HT (high translucency) and LT (low translucency) respectively) and four thicknesses (1, 2, 3, 4 mm) of RNB specimens. Vickers microhardness measurements of resin cement specimens were performed using a Vickers hardness tester. The light transmission of RNB specimens was measured using a spectrometer (SpectroPro-500, Acton Research, Acton, MA, U.S.A.), and the translucency parameter was calculated using the CIEL*a*b* system. Data were statistically analyzed by ANOVA and Tukey's test. There was a significant decrease of microhardness of resin cement specimen with an overlay of 4 mm of RNB thickness and A3 shade in comparison to A1 and 1 mm, respectively (p<0.05). The translucency parameter values and light transmission of RNBs tested differed significantly, according to the thicknesses of the specimen (p<0.05). Light transmission is decreased with increase in the thicknesses of RNBs. Shade A1 transmitted more light than darker blocks. A decrease in microhardness of resin cement specimens was observed with increasing thickness and shade (A1 to A3) of RNBs.

• Journal of the Korean Child Neurology Society
• /
• v.26 no.4
• /
• pp.251-262
• /
• 2018

Purpose: This study aimed to identify changes in smart device usage trends of young children using two studies conducted in 2015-2016 and 2017 respectively. Methods: We compared the data of the previous study of 130 children (Group A) and the new study of 162 children (Group B). The children and parents were recruited from kindergartens in Seoul and Guri/Namyangju cities. We used the "Parental questionnaire for smart device usage status." Results: There were some changes in the smart device usage in young children and parental perception. In the 2017 study, smart device usage time increased during weekends (P<0.05) and the usage with siblings decreased (P<0.05). In 2017, the smart device was mostly used when children had to be quiet without disturbing others (36.8%). No significant difference existed in the main purpose of use: watching video clips (79.3% vs 76.6%). Overall control of the usage was still largely exercised by mothers; however, when using applications, mothers still only helped the children on request (51.8% vs 49.7%). Regarding the effect of smart device on children, responses of "not knowing" decreased and "will be negative" and "will be positive" increased (P<0.05). Additionally, most mothers thought that "Although the smart device is currently unnecessary, it will be needed in future" in 2017 (46.3%). Conclusion: Limiting the smart device usage time during the weekends and increasing parental involvements are recommended. Guidelines for smart devices usage in young children are also necessary considering the changes in parental attitudes in recognizing the smart device usage as unavoidable.

• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.17-52
• /
• 2018

The purpose of this paper is to measure the clustering change and analyze empirical results. Additionally, by using k-means, hierarchical, and mixed models on Asian container ports over the period 2006-2015, the study aims to form a cluster comprising Busan, Incheon, and Gwangyang ports. The models consider the number of cranes, depth, birth length, and total area as inputs and container twenty-foot equivalent units(TEU) as output. Following are the main empirical results. First, ranking order according to the increasing ratio during the 10 years analysis shows that the value for average linkage(AL), mixed ward, rule of thumb(RT)& elbow, ward, and mixed AL are 42.04% up, 35.01% up, 30.47%up, and 23.65% up, respectively. Second, according to the RT and elbow models, the three Korean ports can be clustered with Asian ports in the following manner: Busan Port(Hong Kong, Guangzhou, Qingdao, and Singapore), Incheon Port(Tokyo, Nagoya, Osaka, Manila, and Bangkok), and Gwangyang Port(Gungzhou, Ningbo, Qingdao, and Kasiung). Third, optimal clustering numbers are as follows: AL(6), Mixed Ward(5), RT&elbow(4), Ward(5), and Mixed AL(6). Fourth, empirical clustering results match with those of questionnaire-Busan Port(80%), Incheon Port(17%), and Gwangyang Port(50%). The policy implication is that related parties of Korean seaports should introduce port improvement plans like the benchmarking of clustered seaports.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.993-997
• /
• 2011

The aims of this research were to determine the proximate composition of various salts and to compare two digestion methods (direct digestion without heating, and microwave digestion) for the determination of the main mineral contents of various salts. Twelve salt samples were divided into three groups of four samples each (imported, Korean gray, and Korean white salts). As a result, the NaCl contents of the Korean white, Korean gray, and imported salts were 85.1, 89.3, and 91.3%, respectively. The salts in the three groups were analyzed for their main mineral contents via AAS. The sodium (Na) content of the Korean white salt was found to be slightly lower than that of the imported salt while the magnesium (Mg) and potassium (K) contents of the Korean white salt were found to be higher than those of the imported salt. The mineral composition (% Na:Mg) obtained using microwave-assisted digestion procedures, and the other dissolutions for the subsequent sample analysis, were 89:1 (for both the imported and Korean gray salts) and 82:3 vs. 81:3 (Korean white salt), respectively. The data regarding the mineral contents and composition of the sun-dried salts obtained through the analysis method of wet digestion and the dissolution procedure were compared, and no significant difference was found between the two datasets. Consequently, in this paper, a direct dissolution procedure is suggested for the analysis of the mineral composition of salt.