• 한국진공학회지
• /
• 제20권2호
• /
• pp.86-92
• /
• 2011

본 연구에서는 새롭게 개발된 센서인 in-situ particle monitor (ISPM)와 기존센서의 기능을 업그레이드 한 센서인 self-plasma optical emission spectroscopy (SPOES)를 이용해 화학기상증착 진공공정을 진단하였다. 본 연구에서 사용된 증착공정 장비는 silane 가스를 이용한 silicon plasma enhanced chemical vapor deposition과 borophosphosilicate glass 증착장비이다. 두 장비의 증착 또는 클리닝 조건에서의 배출되는 오염입자와 배기가스를 개발된 센서를 이용해 공정상태를 실시간으로 진단하는 것과 개발된 센서의 센싱 능력을 검증하고자 하는 목적으로 연구가 진행되었다. 개발된 센서는 장비 배기구 설치되었으며, 공정압력, 유량, 플라즈마 파워 등의 공정변수 변화에 따른 오염입자 크기 및 분포와 배기 부산물의 변화를 측정하고, 측정 결과의 상호 연관성을 분석하였다.

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5594-5600
• /
• 2011

본 논문에서는 급격히 변화하는 환경에서 생존하기 위한 기업 역량의 영향요인들을 전략적 인적자원관리의 관점을 통하여 해석하였다. 역량 중심의 전략적 인적자원관리에서는 인적자원역량을 증대하기 위하여 인적자원관리(HRM)와 기업전략과의 연계를 통한 학습기반의 형성이 중요함을 언급하고 있다. 본 논문에서는 기업 경쟁우위의 핵심 결정요소인 기업역량 구축 과정을 인적자원역량과 대 고객 역량과의 연계과정으로 실증 검증하였다. 본 연구는 직업능력개발원의 인적 자본 기업패널자료 2차년도 데이터를 기반으로 분석하였으며, 가설검증을 위하여 구조방정식 모형을 이용하였다. 분석 결과, 인사부서의 전략적 참여와 정보시스템(IS) 활용능력은 인적자원역량에 모두 유의한 수준에서 긍정적인 영향을 미치고 있었으며, 인적자원역량은 대 고객 역량에 매우 유의한 영향을 주는 것으로 검증되었다. 이상의 연구결과를 바탕으로 연구의 논의와 시사점을 제시하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• Journal of Microbiology and Biotechnology
• /
• 제25권8호
• /
• pp.1281-1290
• /
• 2015

Thermolysin and its homologs are a group of metalloproteases that have been widely used in both therapeutic and biotechnological applications. We here report the identification and characterization of a novel thermolysin-like protease, BtsTLP1, from insect pathogen Bacillus thuringiensis serovar Sichuansis strain MC28. BtsTLP1 is extracellularly produced in Bacillus subtilis, and the active protein was purified via successive chromatographic steps. The mature form of BtsTLP1 has a molecule mass of 35.6 kDa as determined by mass spectrometry analyses. The biochemical characterization indicates that BtsTLP1 has an apparent K_m value of 1.57 mg/ml for azocasein and is active between 20℃ and 80℃. Unlike other reported neutral gram-positive thermolysin homologs with optimal pH around 7, BtsTLP1 exhibits an alkaline pH optimum around 10. The activity of BtsTLP1 is strongly inhibited by EDTA and a group of specific divalent ions, with Zn²⁺ and Cu²⁺ showing particular effects in promoting the enzyme autolysis. Furthermore, our data also indicate that BtsTLP1 has potential in cleaning applications.

• 대한방사선기술학회지:방사선기술과학
• /
• 제24권2호
• /
• pp.65-70
• /
• 2001

The purpose of this study is to prevent nosocomial infection in patients through contact of radiographic cassettes. Data were collected from radiographers working in 29 university hospitals in Seoul in February and March 2001. Radiographic cassettes were disinfected daily in 5 hospitals, weekly in 4 hospitals, monthly in 5 hospitals, bimonthly in 1 hospital and once every three months in another hospital. 12 other hospitals do not practice regular disinfections of radiographic cassettes. Gauze soaked in disinfectant solution is used in 7 hospitals while 11 hospitals used cotton and cloth soaked in disinfectant solution to clean the radiographic cassettes. 26 hospitals used 99% alcohol based disinfectant solutions while 3 hospitals used 75% alcohol based disinfectant. 26 hospitals use of intercourse cassettes outpatients and in patients. In 26 hospitals, all patients shared the same set of radiographic cassettes used in the hospitals, or in 26 hospitals, separate sets of radiographic cassettes are used for outpatients and inpatients. Separate sets of cassettes are used for ICU and inpatients in 6 others hospitals. 23 hospitals used the same sets of radiographic cassettes for all their patients. radiographic cassettes are cleaned in wash area in the study room of the radiographic department in 17 hospitals. 12 other hospitals do not have designated cleaning areas for the cassettes. All radiographers practiced hands washing with soap. All 29 hospitals surveyed have infection control committee. However, only 9 out of the 29 hospitals surveyed provided Infection disinfections control education to radiographers. Only 3 hospitals have radiographers sitting in the infection control committee. Infection management education is conducted in 63 hospitals annually, twice a year in 1 hospital and once every 3 months in 2 hospitals.

• Toxicological Research
• /
• 제30권3호
• /
• pp.205-210
• /
• 2014

Didecyldimethylammonium chloride (DDAC) is used for various purposes, such as a fungicide for coolants, an antiseptic for wood, and disinfectant for cleaning. Despite the increasing likelihood of DDAC inhalation, available data on its toxicity from inhalation are scarce. Therefore, this study was aimed at confirming the toxicity of DDAC after inhalation exposure for 2 wk. Male Sprague-Dawley rats were exposed to approximately $0.15mg/m^3$, $0.6mg/m^3$, and $3.6mg/m^3$ DDAC aerosols in whole-body exposure chambers. After DDAC exposure for 2 wk, effects of DDAC on body weight, blood, bronchoalveolar lavage (BAL), and the lungs were verified. The mass median aerodynamic diameter of DDAC aerosols was $1.86{\mu}m$ and the geometric standard deviation was 2.75. The concentrations of DDAC aerosols for the low, medium, and high groups were $0.15{\pm}0.15mg/m^3$, $0.58{\pm}0.40mg/m^3$, and $3.63{\pm}1.56mg/m^3$, respectively. Body weight gain was significantly influenced by DDAC exposure. In the high group, a body weight decrease of 2.6 g was observed, whereas a 25.8 g increase was observed in the normal control group after the first 3 days. The low and medium groups showed 23.3 g and 20.4 g increases, respectively, after the first 3 days. Decreases in body weight were recovered during the next 4 days. In contrast, no changes were noted in hematological and blood biochemistry parameters after DDAC exposure. Furthermore, only mild effects were observed on bronchoalveolar cell differentiation counts and cell damage parameters in the BAL fluids of the medium and high groups. Although inflammatory cell infiltration and interstitial pneumonia were partially observed, fibrosis was not found in the lungs of the medium and high groups. In conclusion, body weight gain and the lungs were mainly affected by DDAC exposure. The no-observed-adverse-effect level (NOAEL) for DDAC was determined as $0.15mg/m^3$.

• 한국산업융합학회 논문집
• /
• 제23권4_2호
• /
• pp.617-626
• /
• 2020

The drilling mud is essentially used in oil and gas development. There are several roles of using the drilling mud, such as cleaning the bottomhole, cooling and lubricating the drill bit and string, transporting the cuttings to the surface, keeping and adjusting the wellbore pressure, and preventing the collapse of the wellbore. The fragments from rocks and micro-sized bubbles generated by the high pressure are mixed in the drilling mud. The systems to separate those mixtures and to keep the uniformly maintained quality of drilling mud are required. In this study, the simulation is conducted to verify the performance of the mud tank's agitation capacity. The primary role of the mud tank is the mixing of mud at the surface with controlling the mud condition. The container type is chosen as a mud tank pursuing efficient transport and better management of equipment. The single- and two-phase simulations about the agitation in the mud tank are performed to analyze and identify the inner flow behavior. The convergence of results is obtained for the vertical- and axis-direction velocity vector fields based on the grid-dependency tests. The mixing time analysis depending on the multiphase flow conditions indicates that the utilization of a two-stepped impeller with a smaller size provides less time for mixing. This study's results are expected to be utilized as the preliminary data to develop the mixing and integrating equipment of the onshore drilling mud system.

• 대한토목학회논문집
• /
• 제39권5호
• /
• pp.647-656
• /
• 2019

본 논문은 소규모 공동주택 소유자를 대상으로 건축물유지관리업무를 구성하는 요소들의 상대적 중요도를 분석하는 논문이다. 이를 통해 효과적인 관리방안을 수립하기 위한 기초자료를 제공하고자 한다. 연구의 목적을 달성하기 위해, 본 논문은 국토교통부가 제시한 건축물유지관리 가이드라인을 기초로 하여 유지관리업무의 구성요소들을 추출하고, 그 중요도를 분석하였다. 연구 결과는 다음과 같다. 첫째, 1차 수준의 분석 결과, 응답자들은 전반적인 주택유지관리에 있어 '시설 관리'가 가장 중요한 것으로 인식하고 있었고, 다음으로 '입주 관리', '보안 관리', 그리고 '유지관리 행정' 순으로 중요하다고 판단하고 있었다. 둘째, 2차 수준의 분석 결과, 유지관리 행정의 하위요인들에서는 예산 결산이 가장 중요하다고 판단하였고, 시설 관리의 하위요인들에서는 청소가 가장 중요하다고 판단하였으며, 보안 관리의 하위요인들에서는 차량에 대한 관리가 가장 중요하다고 판단하였고, 마지막으로 입주 관리의 하위요인들에서는 관리업무 홍보가 가장 중요하다고 판단하는 것으로 나타났다. 이 결과를 통해 본 연구는 소규모 공동주택의 관리를 위해 지자체별 관리 공단을 설립하는 것이 중요하다는 결론에 이른다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.854-856
• /
• 2014

일인 다기기 시대에 맞추어 스마트 기기로 다양한 가전제품과 전자기기를 스마트 디바이스를 이용하여 제어 가능하게 출시하고 있다. 또한, 청소로봇과 냉장고, 에어컨, TV 등의 제품 수가 빠르게 증가하고 있으며 이러한 기기들을 이용하여 DLNA(Digital Living Network Alliance) 시스템을 구축하고 있다. 그리고 국내외에서 IoT(Internet Of Things)나 Alljoyn 같은 기술들을 개발 및 제공하고 있다. 하지만 현재 사용하고 있는 가전제품이나 전자기기들은 운영체제가 설치되어있는 제품보다 설치되어있지 않은 제품이 많다. 또한, 스마트 가전제품을 사용하지 않는 사용자는 스마트 가전제품 보다는 기존의 전자제품을 구입하는 경우가 더 많이 발생한다. 본 논문에서는 모바일 기기를 사용하여 사용자가 원하는 데이터를 수치화하고 아두이노 보드에 전송하여 운영체제가 없는 기존의 가전제품도 스마트 기기와 같은 제어를 할 수 있도록 하는 시스템을 제안하고 구현한다.

• 한국물환경학회지
• /
• 제37권5호
• /
• pp.398-404
• /
• 2021

The use of water purifiers has been increasing every year due to increased drinking water safety concerns raised by the water pollution accidents occasionally reported. Currently, more than 10 million water purifiers have been distributed in Korea, and the estimation of the purifier sales reaches two million units per year. As a result, the number of used water purifier filters that must be replaced on a regular basis has gradually increased. However, regardless of the considerations for the capacity of used filters remaining, water purifier filters were replaced and collected at regular intervals. The high cost of disposal of the used filters by landfill or incineration were required. Thus, in this study, the current status and trends of recycling technologies for used water purifier filters were reviewed. It is noted that there was insufficient statistical data to understand the current status of the difference between the number of used water filters discarded and the number of those recycled. Most studies on the recycling of old water purifier filters have concentrated on pretreatment and cleaning methods for sediment filters and membrane filters, with the goal of extending the lifespan of used filters. Further, the study suggested future study directions on the recycling of used water purifier filters, which could be useful information on establishing environmental policy to promote the recycling of used filters.