• 한국측량학회지
• /
• 제21권4호
• /
• pp.347-353
• /
• 2003

최근 수치사진측량은 각종 첨단 산업분야에 그 응용이 증대되고 있으며, 많은 관심과 연구가 진행되고 있는 실정이다. 따라서 본 연구에서는 수치사진측량에 의한 도로평면선형정보체계 개발하였다 먼저 수치사진측량에서 취득된 자료들을 객체 지향적인 언어인 Delphi를 이용하여 도로평면선형정보(BC,EC,R,IP)를 구축하는 프로그램을 개발하였고, 개발된 프로그램은 영상자료를 많이 이용하여 기존보다 시각적인 효과를 극대화할 수 있었다. 그리고 개발한 도로평면선형정보의 제원 값은 동적GPS에 의해 취득된 자료를 최소제곱법의 원리를 이용한 평면선형추출 프로그램값과 비교하면, IP값은 약 X,Y방향으로 약 2m정도 정확도가 향상되었고, 곡선반경(R)은 약 2.5m정도의 정확도향상이 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.486-486
• /
• 2000

This paper is concerned with a transfer alignment method for the SDINS(StrapDown Inertial Navigation System) under ship motions. Major error sources of transfer alignment are data transfer time-delay, lever-arm velocity and ship body flexure. Specifically, to reduce alignment errors induced by measurement time-delay effects, the error compensation method through delay state augmentation is suggested. A linearized error model for the velocity and attitude matching transfer alignment system is first derived by linearizing the nonlinear measurement equation with respect to its time delay and augmenting the delay state into the conventional linear state equations. And then it is shown via observability analysis and computer simulations that the delay state can be estimated and compensated during ship motions resulting in considerably less alignment errors.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.87-91
• /
• 2003

Effects of the circular and non-circular pad shapes on self-alignment in BGA soldering are predicted using Surface Evolver, and the calculated results are compared with experimental data. While the pad shape has minor effects on self-alignment in the vertical direction, self-alignment in the lateral direction depends on the pad direction and length ratio of the non-circular pad. Larger restoring force is obtained in the minor-axis direction than the major-axis direction, which suggests a possibility of reducing misalignment in the specific direction. The restoring force of the circular pad is between those of the non-circular pad in the major and minor-axis directions. The calculated results of Surface Evolver show reasonably good agreements with experimental data using the shear loading system.

• 한국항공우주학회지
• /
• 제31권10호
• /
• pp.105-111
• /
• 2003

위성체 정렬은 위성체 조립 및 시험과정에서 중요한 부분이다. 인공위성이 우주궤도상에서 성공적인 임무를 수행하기 위해서는 자세제어 및 탑재체용 부분품들에 대하여 측정허용오차 $0.1^{\circ}{\sim}0.7^{\circ}$의 정밀하고 정확한 측정이 요구되며 정렬된 상태에서의 위성체 좌표계의 정확한 방향좌표를 측정하여 지상에 위치한 위성체 관제부에서 위성체의 자세제어 등에 사용하도록 제공하게 된다. 본 논문에서는 자동시준에 의한 위성체 정렬 측정 이론에 대하여 기술하고 데오도라이트를 사용하여 위성체 정렬을 측정할 수 있는 측정방법 및 그 측정 결과에 대하여 고찰해 보고자 한다.

• 한국통신학회논문지
• /
• 제35권12C호
• /
• pp.971-976
• /
• 2010

본 논문은 홀로그래픽 저장장치를 위한 오류 정정 4/6 변조 부호에 대해서 알아보고, 어긋남이 존재하는 상황에서 성능을 알아보았다. 홀로그래픽 저장장치는 2차원 인접 심볼간 간섭이 생기는 채널로, 읽기 성능을 높이기 위해 변조 부호를 사용해야 한다. 이러한 변조 부호에 길쌈 구조가 더해지면 오류 정정 능력을 가지게 된다. 오류 정정 4/6 변조 부호는 기존의 변조 부호보다 성능이 우수하였고, 어긋남에 대해서도 강인한 성능을 보여준다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제3권12호
• /
• pp.523-530
• /
• 2014

온톨로지 정렬의 목적은 지식을 공유 및 재사용 하는 데 있다. 기존 온톨로지 정렬 시스템은 온톨로지 개념의 모호성 때문에 여러 가지 다양한 측정 기법을 사용하고 전수조사를 수행하여 사용자가 만족하는 결과를 얻는다. 온톨로지 개념이 점차 많아짐에 따라 계산이 복잡해지고 걸리는 시간이 기하급수적으로 증가하여 처리 과정에서 오류가 발생한다. 이를 해결하기 위하여 메타 휴리스틱 알고리즘을 사용하는 메타 매칭이 연구되고 있다. 기존 메타 매칭 시스템에서는 사용하는 파라미터가 많기 때문에 온톨로지 정렬 처리에 계산이 복잡하고 특정 도메인의 다양한 데이터에 따라 조율이 요구되어 온톨로지 정렬 탐색에 좋은 성능을 보여주지 못했다. 이 논문에서는 온톨로지 정렬을 쉽고 간단한 계산을 통해 높은 성능을 목표로 하여 DCS(Discrete Cuckoo Search) 를 사용한 온톨로지 정렬 알고리즘을 제안한다. 제안한 알고리즘은 Levy Flight 분포에 따른 탐색으로 효율적인 전략을 보여준다. 제안된 알고리즘은 OAEI 2012(Ontology Alignment Evaluation Initiative)에서 제공하는 벤치마크 데이터와 제안 알고리즘을 사용하여 성능을 평가한다.

• The Journal of Korean Physical Therapy
• /
• 제21권2호
• /
• pp.23-29
• /
• 2009

Purpose: This study examined the effects of the symmetrical scapular alignment on the weight bearing of hemiplegic patients in the standing position. Methods: PALM (PALpation Meter) test and Gaitview AFA-50 were used to measure the skeletal alignment of the scapula and the weight bearing loaded on the affected and unaffected sides before and after training. The data was analyzed using a paired t-test on the SPSS 12.0 program for descriptive statistics. A p value <0.05 was considered significant. Results: The mean difference in the scapular alignments on sup. & mid. & inf. area in the hemiplegic side before and after training was $0.93\pm0.50cm$ and $0.58\pm0.43cm$, respectively. There was a significant decrease after training rather than that before (p<0.05). The mean weight bearing on the foot area in the hemiplegic patients before and after training was $9.12\pm5.51N/cm^2$ and $4.36\pm4.11N/cm^2$, respectively,. There was a significant decrease after training rather than that before (p<0.05). The scapuar alignments and weight bearing data on the standing position were grouped around the average (to central point) in the distribution graph. Conclusion: These findings suggest that the symmetrical scapular alignment can serve as an effective means of improving the weight bearing ability of hemiplegic patients.

• 동의생리병리학회지
• /
• 제22권2호
• /
• pp.459-463
• /
• 2008

Postural balance of temporomandibular joint (TMJ) reflects the neuromuscular balance. TMJ posture treatment for meridian yinyang balance has been asserted to have an impact upon cervical spine alignment with an episodic good clinical result for refractory torticollis cases. A retrospective study with one-group pretest-posttest design was conducted to review cervical spine imaging data and clinical symptom changes in cervical dystonia cases to explore the effect of TMJ balance treatment. Review of clinical symptoms and cervical spine imaging data including computed tomography and simple x-ray of 9 cervical dystonia cases revealed significant improvement of cervical spine alignment and clinical symptoms. Improvement of cervical spine alignment may be an underlying mechanism of TMJ balance treatment, as a way of balancing the whole-body meridian system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.274-280
• /
• 2005

The objective of this study Is to investigate the heat transfer performance of plate discrete fin-and-tube heat exchangers with large fin pitch. In this study, twenty-two heat exchangers were tested with a variation of fin pitch, number of tube row, longitudinal tube pitch and fin alignment. Discrete fin type exchangers improved heat transfer performance more than 10% compared to tile continuous fin type heat exchangers. The air-side heat transfer coefficient decreased with a reduction of the fin pitch and an increase of the number of tube row, The staggered fin alignment improved heat transfer performance more than 6% compared to the inline fin alignment. The effect of longitudinal tube pitch was insignificant on the j-factor and experiments found opposite effects on the j-factor with respect to fin alignment. Heat transfer correlations were developed from the measured data for flat plate discrete fin-and-tube heat exchangers with large fin pitch. The correlations yielded good predictions of the measured data with mean deviations of 1,4% and 0.3% for tire inline and staggered tube alignment, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권8호
• /
• pp.2366-2380
• /
• 2024

In this study, a high-speed template matching system is proposed for wafer-vision alignment. The proposed system is designed to rapidly locate markers in semiconductor equipment used for wafer-vision alignment. We optimized and implemented a template-matching algorithm for the high-speed processing of high-resolution wafer images. Owing to the simplicity of wafer markers, we removed unnecessary components in the algorithm and designed the system using a field-programmable gate array (FPGA) to implement high-speed processing. The hardware blocks were designed using the Xilinx ZCU104 board, and the pyramid and matching blocks were designed using programmable logic for accelerated operations. To validate the proposed system, we established a verification environment using stage equipment commonly used in industrial settings and reference-software-based validation frameworks. The output results from the FPGA were transmitted to the wafer-alignment controller for system verification. The proposed system reduced the data-processing time by approximately 30% and achieved a level of accuracy in detecting wafer markers that was comparable to that achieved by reference software, with minimal deviation. This system can be used to increase precision and productivity during semiconductor manufacturing processes.