• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.249-263
• /
• 2017

The expansion behavior of inflatable steel pipe rockbolt shows geometric nonlinearity due to its ${\Omega}-shaped$ section. Previous studies on the anchoring behavior of inflatable steel pipe rockbolt were mainly performed using theoretical method. However, those studies oversimplified the actual behavior by assuming isotropic expansion of inflatable steel pipe rockbolt. In this study, the anchoring behavior of the inflatable steel pipe rockbolt were investigated by the numerical method considering the irregularity of pipe expansion and other influencing factors. The expansion of inflatable steel pipe rockbolt, the contact stress distribution and the change of the average contact stress and the contact area during installation were analyzed. The contact stresses were developed differently depending on the constitutive behavior of rocks. Small contact stresses occurred in steel pipes installed in elasto-plastic rock compared to steel pipes installed in elastic rock. Also, the anchoring behaviors of the inflatable steel pipe rockbolt were different according to the stiffness of the rock. The steel pipe was completely unfolded in the case of the stiffness smaller than 0.5 GPa, but it was not fully unfolded in the case of the stiffness larger than 0.5 GPa for the given analysis condition. When the steel pipe is completely unfolded, the contact stress increases as the rock stiffness increases. However, the contact stress decreases as the rock stiffness increases when the steel pipe is not fully expanded.

• Journal of Service Research and Studies
• /
• v.9 no.1
• /
• pp.1-16
• /
• 2019

This study analyzed Korean representative ideology to establish a service philosophy. As a follow - up study of the service philosophy consistency study of the Korean original idea, we searched for the coherence as the philosophy of the service age in the Korean representative ideology. The basic structure and operation model of service philosophy are presented, and the service philosophy of major korean ideology is derived. The philosophy of service can be presented by the structure of service and the operation of service. The essential characteristics of the service are relationship, interactivity, horizontality, and harmony, and the service structure that reflects this is the coexistence of products and services. Based on the discussion on the structure and operation of the service philosophy, the service philosophy synthesis of Korean representative ideology is presented. From the Silla era to the Koryo dynasty, the essence of Korean Buddhism thought is in line with the service philosophy, and it was found that Toegye and Yulgok to Dasan's thoughts are also consistent with service philosophy. In the future, we need further studies to refine the structure and operational principles of the service philosophy and to develop it into a big idea. In addition, it is necessary to follow up the service philosophy of Oriental representative ideology centering on Chinese and Indian philosophy. Ultimately, it is necessary to establish a service philosophy as the main philosophical thought and to establish a service philosophy as a desirable future economic and social philosophy.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.10
• /
• pp.49-57
• /
• 2013

Recently, recycling of the industrial by-products has been an important issue of the Yeosu bay, where large industrial complex is located. Major industrial by-products which are produced from Yeosu industrial complex area are phosphogypsum and flyash, which are about 82% and 10% of the 1.6 million tons industrial by-products. Moreover since the Yeosu industrial complex is located at seaside, phosphogypsum has been pointed as cause of serious environmental contaminant from the regional society. Therefore recycling study can't be delayed anymore. In this paper, artificial aggregate was manufactured by non-sintering process from industrial byproducts - e.g., phosphogypsum and slag - as a geotechnical drainage material. To show the feasibility of the artificial aggregate as a geotechnical drainage material, geotechnical experiments including particle size analysis, permeability test, and large scale direct shear test were carried out. Test results show that the permeability of the artificial aggregates range from $6.94{\times}10^{-1}cm/sec$ to $8.86{\times}10^{-1}cm/sec$, which is much larger value than those are required for the drainage material from the construction specification in Korea, and the friction angle of the artificial aggregate is as large as that of sand in water immersion conditions. From the test results, it was concluded that artificial aggregate made from industrial by-products can be used successfully as a geotechnical drainage material.

• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.36-52
• /
• 2009

Demographic change is the best indicator to be able to show the rural change exactly and thus becomes the factor to be considered by all means in the setting-up process of the rural development policy. First of all, this paper is concerned with the two main themes, depopulation and aging process of Goryeong-gun(county), after a brief consideration of the demographic trends in rural areas of Korea. And then it will analyze the population structures of 8 administrative districts of Goryeong-gun(1 Eub, 7 Myeons) to reveal the areal differentiation of rural demographic change. Like other rural areas in Korea, Goryeong-gun experienced a sharp depopulation and aging during last several decades, and it represents typical rural backward areas in Korea. But within the same county, the process of population change differs from district to district. On the basis of several demographic indicators, 8 administrative districts(Eub and Myeons) in Goryeong-gun can be classified into 4 types of population change, namely 'type with stagnant population' like Goryeong-eub, 'type with increasing population' like Dasan-myeon, 'type with decreasing population' like Seongsan-myeon Gaejin-myeon Sangrim-myeon, 'type with rapidly decreasing population' like Deokgok-myeon Unsu-myeon Ugok-myeon. It highlights the need to develop differentiated rural policies according to relevant regional conditions.

• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.1-15
• /
• 2009

This study aims to provide preliminary data needed for establishing policies on the environment and disasters of Goryeong county. The main results are as follows. First, the present master plan of the region does not reflect local socio-economic and environmental conditions and the local people's opinion. Second, The air conditions of Gyeongbuk province and Goryeong county are within the permitted limit of air pollution of Korea. Third, the analysis of water pollution index in Nakdong river system shows improvement of water quality in both Andong and Goryeong. Fourth, the conditions of waste collection and disposal are improved in both Gyeongbuk province and Goryeong county. Fifth, in case of environmental pollutant emitting facilities of Gyeongbuk province, the proportion of 1st to 4th grade(relatively much more environmental pollutant emitting quantity than 5th grade) tends to be increasing. Sixth, environmental pollutant emitting facilities of Goryeong county are remarkably increasing in Dasan, Gaegin, Ssangrim, involving industrial complex. Finally, in case of disasters, it is relatively stable in Yecheon, Gumi, Uiseong, Yeongju and Cheongdo, while relatively unstable in Seongju, Gunwi, Yeongcheon, Chilgok, Mungyeong, Bonghwa and Goryeong.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.538-548
• /
• 2016

The purpose of this study is to identify the possibility of effective tuning works, understand the characteristics of tuning engine, and analyse the basic data of engine tuning inspection corresponding to the safe operation and environment of a driving gasoline car. The effects of tuning on the characteristics of performance and exhaust emissions under a wide range of engine speeds are experimentally investigated by the actual driving car with a four-cycle, four-cylinder DOHC, turbo-intercooler, water-cooled gasoline engine operating at four types of non-tuning, tuning 1, 2 and 3. The tuning parts in the gasoline engine are the intake manifold, intake pipe and air filter. In the experiment, the output, torque and air-fuel ratio of the five-speed automatic transmission vehicles were measured at the chassis dynamometer(Dynojet 224xLC) with one person on board. The exhaust emissions of $NO_X$, THC, CO, $O_2$ and $CO_2$, and excess air ratio(${\lambda}$) at the other chassis dynamometer(DASAN-MD-ASM-97-KR-HD) were also measured by the idle/constant-speed mode(ASM2525 mode) test method. It is found that the actual air-fuel ratios of non-tuning and tuning engines were shown to be lower than the stoichiometric air-fuel ratio with increasing engine speed, and the actual air-fuel ratio of non-tuning engine was slightly higher than those of tuning engines when the engine speed is more than 4000 rpm. The output was significantly increased by the tuning whereby the maximum output of tuning engine was more increased to approximately 117.64% than that of non-tuning engine. In addition, CO, THC and $NO_X$ emissions of non-tuning and tuning engines measured by the constant-speed test mode were all satisfied with the inspection standards. CO emission was increased, while THC and $NO_X$ emissions were reduced by tuning.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.69-76
• /
• 2009

Alumina powder was prepared from heat-treatment of artificial marble waste fine aggregate containing $Al(OH)_3$ for the purpose of the feasibility of its recycling. Artificial marble waste was heat-treated between $500^{\circ}C$ and $1000^{\circ}C$ and XRD, BET surface area, BJH pore size distribution and adsorption of As were analyzed for heat-treated powder. It was found that the adsorption efficiency of As was significantly affected by phase composition of alumina powder rather than its physical characteristic. Heat-treated powder compact was sintered to produce the pellet. Alumina pellet with porosity more than 60% could be obtained after sintering below $1200^{\circ}C$ and also the addition of glass powder as a sintering aid had a positive effect on lowering sintering temperature, led to the high porosity near 60% and adsorption of As over 60% even at $900^{\circ}C$.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.313-320
• /
• 2010

The purpose of this study was to evaluate the freshness of chicken meat during 19 d of storage at $4^{\circ}C$ using a portable electronic nose. The portable system consisted of six different metal oxide sensors and a moisture sensor. Determination of volatile compounds with gas chromatography-mass spectrometry, total bacterial count (TBC), and 2-thiobarbituric acid reactive substances (TBARS) monitored the quality change of the samples. These results were compared with the results measured by the electronic nose system. TBC and TBARS measurements could be separated into five groups and seven groups, respectively, among ten groups. According to principal component analysis and linear discriminant analysis with the signals of the portable electronic nose, the sample groups could be clearly separated into eight groups and nine groups, respectively, among ten groups. The portable electronic nose demonstrated potential for evaluating freshness of stored chicken.

• PNF and Movement
• /
• v.16 no.3
• /
• pp.485-493
• /
• 2018

Purpose: This study provides a treatment for central nervous system development in patients with chronic stroke by investigating changes in the upper limb function over time. The correlations among the activities, participation, and environmental factors of the international classification of functioning (ICF), disability and health are also examined. Methods: The subjects of this study are 18 patients with chronic stroke who were hospitalized and treated at 00 hospital in the Chungcheongbuk-do province. Their upper extremity functions are evaluated using the manual function test (MFT). The activities, participation, and environmental factors are evaluated using the ICF generic form. The correlations between the total scores of the affected and unaffected sides and the ICF items are analyzed using the Pearson correlation analysis. The significance level is p<0.05. Results: When the correlations between the activities and participation areas of ICF and the total score of the affected side of MFT were examined, significant correlations (p<0.05) were found in the following items: changing basic body position (D410), lifting and carrying objects (D430), moving around using equipment (D465), using transportation (D470), washing oneself (D510), caring for body parts (D520), and dressing (D540). When the correlations between the activities and participation areas of ICF and the total score of the unaffected side of MFT were examined, significant correlations (p<0.05) were found among writing (D170), speaking (D330), eating (D550), and drinking (D560). In addition, when the correlation between the environment area of ICF and the total score of the unaffected side of the MFT were examined, significant correlations (p<0.05) were found between products and technology for personal use in daily living (E115) and immediate family (E310). Conclusion: The MFT of patients with chronic stroke is closely correlated with the activities, participation, and environmental factors of ICF. This result suggests that ICF can be used as a useful tool to comprehensively evaluate the abilities of the patient, including the upper extremity function.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.522-528
• /
• 2018

Saemimyeon, a Tongil type, medium-late maturing rice variety, is especially used for preparing rice noodles. Its high amylose content was developed to fit market demands and to be affordable for rice processing industries. One of the high yielding lines, Milyang181 (Hanareum), was used in the final three-way cross of $IR50^*2$/YR18241-B-B-115-1-1 for yield improvement and cultivation stabilization, including disease resistance. YR24235-10-1-3, a high yielding and compact plant type, was selected and named Milyang278 after yield test at NICS (RDA, Miryang) in 2010. It was subjected to regional yield test at six sites in the middle and southern plain areas of South Korea. Saemimyeon heading occurs on August 12 and is a mid-late maturing cultivar, with resistance to leaf blast, rice stripe virus, and bacterial blight (K1-K3a), but it is susceptible to major diseases and insect pest infestation. Saemimyeon showed a high amylose content of 26.7%, with a relatively low KOH digestion value of 3.5, which are key factors in rice noodles and pasta processing. In the local adaptability tests, the yield of Saemimyeon was 7.08 MT/ha-an increase of approximately 106% compared to that of Dasan. Thus, Saemimyeon is suitable for cultivation in the southern and middle plain areas of South Korea.