• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.594-595
• /
• 2006

Porous bearings are lubricated the oil that is contained in porous metal. Then they are always used with no oil supply, because of that, widely used electric motors. But, if oil flow out less than the limit, troubles often happen. This report shows that attempt of estimating oil quantity in porous bearing by using calculation that based Reynols' equation and Darcy's law, aimed of developing long life bearing. And comparing with experimental and calculation result, we show possibility of estimating rest oil quantity in porous bearing at steadry state by calculation.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.489-492
• /
• 2002

We have performed batch chromatography experiments to calculate parameters which are used to design SMB chromatography system. Isotherms of S- and R-ketoprofen enantiomers were gained from small amount loading experiments in a column, and flow rate of four zones of SMB chromatography were calculated using mass balance equations. As a results, diameter and length of columns were 10mm and 600mm, and flow rate of each zone were as follows; $Q_{Feed}$=1.00ml/min ,$Q_{Elu}$=2.81ml/min ,$Q_{Raf}$=1.81ml/min ,$Q_{Ext}$=2.00ml/min , and $Q_{Rec}^{TMB}$=10.75ml/min , From the Darcy's equation, the pressure drop in whole columns of SMB chromatography was 128bar.

• 한국지반공학회논문집
• /
• 제29권7호
• /
• pp.75-89
• /
• 2013

본 연구에서는 산사태 해석을 위한 GIS기반의 지반수문학적인 강우침투-지하수 흐름 모델(YSGWF, YonSei GroundWater Flow)을 개발하였다. 이 모델은 흙의 불포화 특성을 반영하기 위하여 개선된 Green-Ampt 모델을 적용하였으며, 지하수의 흐름을 계산하기 위하여 Darcy의 법칙과 GIS의 래스트 모델을 사용하였다. GIS 수치표고모델을 그리드 형태의 래스트 모델(Raster Model)로 변환하여 기반암 데이터를 모델링 하였으며, 경사와 흐름 방향을 분석하여 지하수 흐름 해석이 가능하도록 하였다. 지하수의 분포는 지표면으로 부터 강우 침투에 의해 일시적으로 형성되는 습윤대, 함양되기 전까지의 불포화대, 기반암 상부의 지하수대로 구분하였으며, 지하수대 상부의 연직방향 침투와 지하수대에서의 수평방향 흐름을 고려하여 3차원적인 지하수 흐름을 계산하도록 하였다. 실제 사례와 비교한 결과, 본 지하수 예측모델(YSGWF)에 의한 산사태 해석 결과는 산사태 발생지역을 비교적 정확히 예측하는 것으로 판단되며, 이러한 검증을 토대로 실제 산지에 대한 산사태 해석을 위한 지하수 예측에 적용 가능함을 확인할 수 있었다.

• 한국물환경학회지
• /
• 제23권5호
• /
• pp.683-688
• /
• 2007

질량보존의 법칙과 Darcy의 법칙으로 표현되는 Richards 방정식은 비포화대의 토양수분흐름을 모의하는데 널리 사용되어 왔다. Richards 방정식은 압력수두의 항으로 표현되는 방정식, 토양수분의 항으로 표현되는 방정식, 그리고 이 둘을 혼합한 형태의 방정식 등, 세가지 형태로 표현할 수 있다. 고차의 비선형 항들을 포함하는 이 편미분방정식들을 수치해석방법으로 풀 때, 질량 비보존을 수반하는 오류의 결과가 초래될 수 있다. 세가지 방정식들 중 혼합형 Richards 방정식이, 다른 추가적인 계산없이 질량을 온전히 보존하는 것으로 알려져 있다. 이 연구의 목적은 동질성 토양에서의 1차원적 연직방향 비포화수 흐름모의를 위해, Richards 방정식의 질량보존적 수치해석법을 완전음해 유한차분법으로 개발하고, 이를 통해 민감도 분석을 실시하여 토양특성인자들과 토양종류에 따른 침투율의 변화를 살펴보는 데 있다.

• Advanced Composite Materials
• /
• 제16권3호
• /
• pp.207-221
• /
• 2007

The filling process of resin injection/compression molding (I/CM) can be divided into injection and compression phases. During the resin injection the mold is kept only partially closed and thus a gap is present between the reinforcements and the upper mold. The gap results in preferential flow path. After the gap is filled with the resin, the compression action initiates and forces the resin to penetrate into the fiber preform. In the present study, the resin flow in the gap is simplified by using the Stokes approximation, while Darcy's law is used to calculate the flow field in the fiber mats. Results show that most of the injected resins enter into the gap during the injection phase. The resin injection time is extremely short so the duration of the filling process is determined by the final closing action of the mold cavity. Compared with resin transfer molding (RTM), I/CM process can reduce the mold filling time or injection pressure significantly.

• Korea-Australia Rheology Journal
• /
• 제19권1호
• /
• pp.17-25
• /
• 2007

In liquid composite molding (LCM), composites are produced by impregnation of a dry preform with liquid resin. The resin flow through the preform is usually described by Darcy's law and the permeability tensor must be obtained for filling analysis. While the resin flow in the thickness direction can be neglected for thin parts, the resin flow in the transverse direction is important for thicker parts. However, the transverse permeability of the preform has not been investigated frequently. In this study, the transverse permeability was measured experimentally for five different fiber preforms. In order to verify the experimental results, the measured transverse permeability was compared with numerical results. Five different fiber mats were used in this study: glass fiber woven fabric, aramid fiber woven fabric, glass fiber random mat, glass fiber braided preform, and glass/aramid hybrid braided preform. The anisotropic braided preforms were manufactured by using a three dimensional braiding machine. The pressure was measured at the inlet and outlet positions with pressure transducers.

• 한국지반공학회논문집
• /
• 제31권6호
• /
• pp.27-44
• /
• 2015

일정수심상에서 임의반사율을 갖는 부분중복파와 흐름이 공존하는 경우 얕은 두께를 포함한 유한두께 및 무한두께의 해저지반내에서 동적응답을 나타내는 해석해를 유도한다. 해석해에서 반사율이 0인 경우는 진행파와 흐름과의 공존장으로, 반사율이 1인 경우는 완전중복파와 흐름과의 공존장으로 간단히 변환된다. Biot의 압밀이론에 기초하여 해저지반은 투과탄성매체로, 간극유체는 압축성으로, 그리고 지반내 간극수의 흐름은 Darcy법칙으로 각각 가정된다. 도출된 해석해는 기존의 해석결과와의 비교 검토로부터 검증되며, 실제 계산에서는 반사율, 흐름속도, 입사파의 주기 및 지반두께 등의 변화에 따른 지반변위, 간극수압, 유효응력 및 전단응력의 변동특성을 면밀히 검토한다. 이로부터 흐름이 존재하는 경우 흐름으로 인한 입사파와 반사파의 주기 및 파장의 변화로 인하여 흐름이 없는 경우의 지반내 동적응답과는 큰 차이를 나타내며, 또한 반사율의 크기에 따라 동적응답에서 큰 차이가 나타난다는 것을 확인할 수 있다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권1호
• /
• pp.17-24
• /
• 2007

An experimental investigation was carried out for 4 different types of the aluminum foam heat sinks which were inserted into the annulus. The purpose of this study is to examine the feasibility of a heat sink with high performance forced convective water cooling in the annulus. The local wall temperature distribution, inlet and outlet pressures and temperatures, and heat transfer coefficients were measured for heat flux of 13.6, 18.9, 25.1, 31.4 $kW/m^2$ and Reynolds number ranged from 120 to 9,000. Experimental results show that the departure from the Darcy's law is evident from the pressure loss and the friction factor is much higher while the significant enhancement in Nusselt number is obtained, and average Nusselt number of aluminum foam with high pore density is much higher than that of aluminum foam with low pore density. Correlations for the friction factor is proposed and used for design of thermal applications.

• Journal of the Korean Wood Science and Technology
• /
• 제36권5호
• /
• pp.49-55
• /
• 2008

This study was carried to investigate the effects of steaming and four different drying methods on the longitudinal liquid permeability of Korean pine (Pinus koraiensis Sieb.et Zucc.) board. Four drying methods were air drying, conventional kiln drying, microwave-vacuum drying and high temperature drying. Darcy equation was used for calculating the specific permeability of the small sapwood specimens taken from the treated boards while capillary rising method was used for the heartwood specimens. The sapwood specimens were extracted with water and benzene-alcohol solution to examine the mechanism of liquid flow in treated wood. No significant correlation was found between specific permeability and the number of resin canals of the sapwood specimens. Extraction decreased the differences of specific permeabilities of the sapwood specimens between the five treatment methods. The effects of extraction on the longitudinal permeability are different between five treatments. The fluid path in heartwood was observed by dynamic observation method.

• Advances in aircraft and spacecraft science
• /
• 제10권4호
• /
• pp.317-334
• /
• 2023

This paper presents a basic methodology and a set of numerical tools for the preliminary design of solid-fueled ramjet missiles. An elementary code determines the baseline system configuration comprised of warhead, guidance-control, and propulsion masses and geometries from specific correlations found in the literature. Then, the system is refined with the help of external and internal ballistics codes. Equations of motion are solved for the flight's ascending, cruising, and descending stages and the internal ballistic set of equations designs the ramjet engine based on liquefying fuels. The combined tools sized the booster and the ramjet sustainer engines for a long-range missile, intended to transport 200 kg of payload for more than 300 km range flying near 14,000 m altitude at Mach 3.0. The refined system configuration had 600 mm in diameter and 8,500 mm in length with overall mass of 2,128 kg and 890 kg/m3 density. Ramjet engine propellant mass fraction was estimated as 74%. Increased missile range can be attained with paraffin-polyethylene blend burning at near constant regression rate through primary air mass flow rate control and lateral 2-D air intakes.