• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.354-356
• /
• 2013

This research analysed the marine traffic dangerous degree of korean ports by using the number of passing ships, the passing ratio of large ships and the occurrence number of marine accident. Also, it investigated the basic parameters as the number of sector or area of vessel traffic service area, and it examined the proper design compared the traffic dangerous parameters with the present area number of VTS.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.585-588
• /
• 2008

KICT has been carried out inventory research on the cut slopes of national roads. Inventory research results are basic data using cut slope management system. Inventory data are classified by general status, cut slope characteristics and inspector opinion. Inventory data are utilized to figure out dangerous slopes and decide survey ranking of detailed safety diagnostication. This paper drew the distribution area of dangerous cut slopes using inventory data in Chungcheongdo, and verified efficiency on distribution area of dangerous cut slopes by comparing occurrence frequency of real collapsed cut slopes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.219-225
• /
• 2008

Since July 2006, marine traffic safety management system have been enforced to support the vessels transiting across the coastal area and the vessels coming in and out of ports in southwestern coastal area where heavy traffic density and marine casualties occurred frequently. The marine traffic volume for the marine traffic environmental assessment was measured by the information from RADAR and AIS system in the area. The distributions of marine casualties were analyzed in the main routes and traffic separation schemes during the last five years and the navigational dangerous elements were investigated with the influence of natural environment, the distribution of fisheries and survey questionnaire. Marine accidents of merchant ships have a tendency to decrease gradually but in case of fishing boats, the rate of marine accidents have a contrary results in this area during the last five years. The dangerous elements on navigation appeared to be the dense force from June to August, fisheries activities and the vessels which not follow the compulsory watch on VHF-band radio communication equipments.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.6
• /
• pp.243-250
• /
• 2019

Because of a moving UAV has a lot of potential/kinetic energy, if the UAV falls to the ground, it may have a lot of impact. Because this can lead to human casualities, in this paper, the population density area on the UAV flight path is defined as a dangerous area. The conventional UAV path flight was a passive form in which a UAV moved in accordance with a path preset by a user before the flight. Some UAVs include safety features such as a obstacle avoidance system during flight. Still, it is difficult to respond to changes in the real-time flight environment. Using public Big Data for UAV path flight can improve response to real-time flight environment changes by enabling detection of dangerous areas and avoidance of the areas. Therefore, in this paper, we propose a method to detect and avoid dangerous areas for UAVs by utilizing the Big Data collected in real-time. If the routh is designated according to the destination by the proposed method, the dangerous area is determined in real-time and the flight is made to the optimal bypass path. In further research, we will study ways to increase the quality satisfaction of the images acquired by flying under the avoidance flight plan.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.3
• /
• pp.139-144
• /
• 2013

In Korea, where most of the sites are narrow in space and their earth resistivity is relatively high, the spaces between grounding conductors are likely to be designed narrow in order to lower ground resistance and dangerous voltage below to the permitted safety values. In addition, ground nets are in the shape of square or rectangle depending on the location and size of the facilities and ground contact area, and inner conductors are laid out in grids like the pattern of nets. Nevertheless, with the existing designs, the marginal voltage for safety gets higher as the area is extended further outside, in comparison with that of inner mesh grounding, thus causing much difficulty maintaining them equipotential, and there exist limits in the burial, grounding grid design considering the dangerous voltage of muti-layered model in the constrained sites, was studied.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.76-77
• /
• 2018

Under industry 4.0, Internet of Things (IoT) is advancing a new breed of smart manufacturing environment. However IoT has not been widely applied in construction industry compared with manufacturing environment. IoT enables operational systems that deliver more accurate and useful information for managing construction accidents. IoT enables operational systems that deliver more accurate and useful information for managing construction accidents. In order to apply well IoT for construction safety management, as a preliminary study, this paper presents e safety accident prevention IoT Cone system through dangerous area setting in construction site.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.47-54
• /
• 2015

To prevent safety hazards in dangerous working area, we have proposed an intelligent image analysis system. Six common patterns of safety violations of workers' are defined and its motion detection algorithms are developed for alarm to CCTV monitoring system. Developed algorithms are implemented at 195 dangerous areas such as chemical and gas treated room. The results of violated motion detection ratio by developed system shows 94.95% of true positive cases, and 0.21% of false positive cases from all 587,645 event cases in one month implementation period. In the period, it is observed that the number of safety rule violations and the following accidents are decreased.

• Journal of Korea Multimedia Society
• /
• v.16 no.11
• /
• pp.1272-1280
• /
• 2013

In this paper, we propose an audio surveillance system which can detect and localize dangerous sounds in real-time. The location information about dangerous sounds can render a PTZ camera to be directed so as to catch a snapshot image about the dangerous sound source area and send it to clients instantly. The proposed audio surveillance system firstly detects foreground sounds based on adaptive Gaussian mixture background sound model, and classifies it into one of pre-trained classes of foreground dangerous sounds. For detected dangerous sounds, a sound source localization algorithm based on Dual delay-line algorithm is applied to localize the sound sources. Finally, the proposed system renders a PTZ camera to be oriented towards the dangerous sound source region, and take a snapshot against over the sound source region. Experiment results show that the proposed system can detect foreground dangerous sounds stably and classifies the detected foreground dangerous sounds into correct classes with a precision of 79% while the sound source localization can estimate orientation of the sound source with acceptably small error.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.353-363
• /
• 2019

This paper presents a comprehensive simulation and assessment of gas dispersion above sea from a subsea release using a Computational Fluid Dynamics (CFD) approach. A 3D CFD model is established to evaluate the behavior of flammable gas above sea, and a jack-up drilling platform is included to illustrate the effect of flammable gas cloud on surface vessels. The simulations include a matrix of scenarios for different surface release rates, distances between surface gas pool and offshore platform, and wind speeds. Based on the established model, the development process of flammable gas cloud above sea is predicted, and the dangerous area generated on offshore platform is assessed. Additionally, the effect of some critical factors on flammable gas dispersion behavior is analyzed. The simulations produce some useful outputs including the detailed parameters of flammable gas cloud and the dangerous area on offshore platform, which are expected to give an educational reference for conducting a prior risk assessment and contingency planning.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.846-853
• /
• 2005

The whole death by disaster is totalized to 1,515 person from 1993 to 2004 year in our country. In this section life damages by landslide is totalized 357 people(about 24% of whole life damage). About 36 people are died by landslide(such as cutting area failure every year). Kangwon-do need a lot of interests and prevention because dangerous area that landslide occurrence is more than other area at summer localized downpour or thawing season and there is landslide occurrence possibility area more than other area. Kangwon-do area is higher than other area in natural disaster incidence and damage scale because topography and a lot of rainfalls by summer localized in Kangwon-Do than other area. In this study, dangerous area of landslide occurrence possibility is analyzed and compared Kangwon-Do with other areas in our country. as a result, every year we have experienced landslide occurrence and natural disaster. accordingly, we urgently need to prevent landslide occurrence and natural disaster by analy-zed source about landslide occurrence and condition of disaster in Kangwon-Do and suitable engineering method and construction work.