• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권2호
• /
• pp.172-181
• /
• 2012

One of the most critical issues in naval architecture these days is the operational safety. Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions is the first to ensure for both commercial and military vessels. Unlike the intact stability cases, the assessment of the damaged ship stability is very complicated physical phenomena. Therefore it is widely acknowledged that computational fluid dynamics (CFD) methods are one of most feasible approaches. In order to develop better CFD methods for damaged ship stability assessment, it is essential to perform well-designed model tests and to build a database for CFD validation. In the present study, free roll decay tests in calm water with both intact and damaged ships were performed and six degree-of-freedom (6DOF) motion responses of intact ship in regular waves were measured. Through the free roll decay tests, the effects of the flooding water on the roll decay motion of a ship were investigated. Through the model tests in regular waves, the database that provides 6DOF motion responses of intact ship was established.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.52-59
• /
• 2012

Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions in seaways is of utmost importance. Since the assessment of a damaged ship is complicated due to the highly non-linear behavior, it is widely acknowledged that computational fluid dynamics (CFD) methods are one of the most feasible approaches. Although many research activities are being reported on the damaged ship stability recently, most of them are not designed for validation of CFD studies. In this study, well-designed model tests were performed to build a CFD validation database, which is essential in developing better CFD methods for the damage stability assessment. The geometry of the damaged compartment and test conditions were determined based on preliminary CFD simulations. Free roll decay tests in calm water with both intact and damaged ships were performed and the roll motion characteristics were compared. The damaged ship showed a larger roll damping coefficient and more rapid decrease of roll amplitude than the intact ship. The primary reason of these efforts can be explained by the movement of the flooded water.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.1-14
• /
• 2006

To improve maritime safety, it is very important not only to make safer design and operation but also to do proper response in case of maritime casualty. The large-scaled casualties will be caused by loss of structural strength and stability due to the progressive flooding and enlargement of damage by the effect of waves and wind. To prevent foundering and structural failure, the prediction of ship motion behavior of damaged ship in wave is necessary. This paper describes the motion behavior of damaged ship in waves through theoretical and experimental studies. A time domain theoretical model of damaged ship motions and accidental flooding, which can be applied to any type of ship or arrangement and considers the effects of flooding of compartments, has been developed. The model tests have been carried out in regular and irregular waves with different wave heights and directions in ship motion basin. Those were performed for three different damaged conditions such as engine room bottom damage, side shell damage and bow visor damage of a Ro-Ro ship. Comparison of theoretical and experimental results was performed.

• 한국CDE학회논문집
• /
• 제13권3호
• /
• pp.227-234
• /
• 2008

The number of marine accidents have been decreased since various equipments for navigation control have been introduced to the marine vessels. However, disastrous marine accidents such as ship collisions are occurred more frequently. Therefore, IMO(International Maritime Organization) is enforcing the design requirement of structural strength for marine vessel. Also EU countries are developing new design methodologies and design tools to suggest the design guidance which can minimize the damage of commercial vessels in case of marine collision accidents. In this study, an integrated design system for the safety assessment has been presented to enhance the safety of damaged ships in marine collision accidents. The architecture of system is described by use-cases and IDEF functional analysis. Then an integrated system for safety assessment of damaged ship which is considering both damage stability and structural safety has been developed to support the ship design in early stage.

• 대한조선학회논문집
• /
• 제37권2호
• /
• pp.46-56
• /
• 2000

본 논문은 손상선박의 안전대책에 관한 연구의 일환으로, 황천항행중인 선박이 충돌, 좌초 등 원인에 의해 손상을 받았을 때를 가상하고, 손상선박을 다른 안전한 장소로 예항하고자 할 때의 침로안정성 문제를 다루고 있다. 외력으로는 바람의 영향만을 고려할 때, 예선 피예선계의 침로안정성 평가를 위한 특성방정식을 도출하고, 피예선의 각 손상상태에 따른 침로안정성을 수치계산하였다. 그 결과 손상상태, 풍속, 풍향 및 예항삭의 길이 등이 침로안정성에 미치는 영향을 평가할 수 있었다.

• 대한조선학회논문집
• /
• 제37권1호
• /
• pp.50-59
• /
• 2000

본 연구는 손상된 선박의 최종 평형 상태에서의 동적 안정성에 관한 내용을 담고 있다. 먼저 1자유도 횡동요 운동방정식에 침입수의 영향과 횡풍 횡파의 영향을 적절히 고려하여 손상선박의 횡동요 응답을 구하였으며, 신뢰성공학적 수법을 이용하여 손상선박의 전복확률의 계산법을 정립하였다. 연구결과 해상상태, 운항상태 그리고 손상상태에 따른 동적 안정성을 확률론적으로 평가할 수 있었다.

• 대한조선학회논문집
• /
• 제40권6호
• /
• pp.30-36
• /
• 2003

To improve survivability of damaged ship, assessment of stability and structural safety, and behavior analysis in wave is required. Prediction of sinking time, damage stability and structural strength considering progressive flooding and dynamic force in wave is very important. To do it, a geometric model which can be express damaged ship is prepared. This paper described the geometric modeler for survivability assessment of damaged ship. The modeler is developed based on 3-D geometric modeling kernel, ACIS. The hull form and compartment definition is available fundamentally. And requirement for modeler contains data generation and interface for hydrostatic calculation, behavior analysis, and longitudinal strength analysis and so on. To easy access modeling system by conventional user such as crew, user interface is developing.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 제 23회 정기총회 및 추계학술발표회
• /
• pp.27-36
• /
• 1998

This paper presents a brief outline of dynamic stability of damaged ship in rough, beam wind and waves. The one degree-of-freedom, linear roll equation is adopted with the effects of damage fluid and external forces, but without the effect of sloshing. We evaluate the dynamic stability in terms of capizing probability based on energy balance mechanics and risk analysis , the method of which was proposed by Umeda [2] to the high speed crafts. As a result, we can predict the dynamic stability quantitatively according to sea state , operating and damage conditions.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.110-117
• /
• 2020

In this paper, we estimated the straight line stability by performing a 3 degree of freedom spiral test simulation of a intact/damaged surface combatant using the hydrodynamic coefficient obtained through the PMM(Planar motion mechanism) test based on system engineering process. A model ship was ONR Tumblehome and damaged compartment was set on the starboard bow. As a result of conducting a spiral test simulation based on the experimental results of J.Ha (2018), the asymmetric straight line stability due to the damaged compartment was confirmed. In the case of a ship in which the starboard bow was damaged, it was confirmed that it had the characteristic to deflect to the left when going straight. Also, when estimating the straight line stability of a both port and starboard asymmetric surface combatant, a separated equation of motion model that sees the port and starboard as different ships seems suitable.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.451-459
• /
• 2006

When a ship is damaged and flooded, the motion of the damaged ship is significantly influenced by the flooding water dynamics. The flooding water in the damaged ship has been treated as a lumped mass under the quasi-static assumption in most of previous researches. To calculate the motion of damaged ship rigorously, it is necessary to analyze the coupled dynamics of flooding water. In this study, a series of numerical and experimental studies is conducted for the damaged part of ITTC RORO passenger. FLOW3D is used for investigating the feasibility of the state of the art CFD technique. An applicability of the coupled motion analysis of damaged ships can be confirmed by agreement between the numerical results and the model experiments. A CFD technique is considered for the numerical modeling of the dynamics of flooding water.