• KCI Concrete Journal
• /
• v.13 no.2
• /
• pp.42-48
• /
• 2001

The bend resistance of coated reinforcing bar is greatly influenced by both the adhesion strength between bar and coating materials, and the followed transformation of coating material as bars bend. Especially, tearing state or partial microscopic cracks are predicted on the inside and outside of bending angle, because tensile strength and elongation of polymer film are very different according to types of polymer dispersions in bar coating, and these damaged parts are rapidly corroded by penetration of corrosive factors. In this study, polymer cement slurry coated reinforcing bars with various polymer dispersions are prepared by following combined conditions, polymer-cement ratio of 50% and 100%, coating thickness of 250$\mu$m and 450$\mu$m, coating number, curing age of 3, 7, 14 and 28days. Then the specimens are tested for working life and bend resistance at bending angles $90^{\circ}$, $135^{\circ}$and $180^{\circ}$ to observe the microscopic damage effect as the bars bend. Also, epoxy-coated reinforcing bars for control experiment were used with 250$\mu$m of coating thickness. The tensile strength for polymer films is performed. From the test results, the working life of the polymer cement slurry is within 90 seconds. Among four types of polymer dispersion, polymer cement slurry coated reinforcing bar using St/BA-1 emulsion has the excellent bend resistance, which is remarkably improved than that of epoxy-coated reinforcing bar. And the bend resistance is more related to elongation than tensile strength of polymer film. Polymer cement slurry with a polymer-cement ratio of 100%, a coating thickness of $450\mu$m and one coating using St/BA emulsion is selected as a most suitable coating material for coated reinforcing bar.

• Korean Journal of Health Education and Promotion
• /
• v.23 no.3
• /
• pp.135-147
• /
• 2006

Objective: This study was performed to identify the related factors of exercise injury throughout the actual cases among patients. Method: The subjects of the study consisted of 304 patients(209 male and 95 female) over 20's in seoul and kyonggi area, and data collected by using questionnaires were analyzed with SPSS/WIN 11.0 program. To prove the relative factors of exercise injury from hospital patients Results: 1) It was found that the general degree of exercise injury showed significant difference regarding gender, age and education level. In other words, if it was male, young and high school graduate, the portion of exercise injury for the person was higher than others. On the other hand, the duration of medical treatment for the patient, who is male, old and college graduate took longer than the others. 2) It demonstrated that the lower extremity was most intensively damaged due to the exercise injury, especially, knees and ankles had the most portion of exercise injury and a sprain was the most common form of exercise injury for these body parts. 3) The degree of exercise injury regarding of exercise maintains significant difference with the frequency of exercise. In fact, the more exercise was done by a person such as 3 to 4 days a week, the less duration of medical treatment for the person was taken. 4) It also showed that there was significant difference between the habit of exercise and the degree of exercise injury. In other words, a person had better exercise habit, it took the person less duration of medical treatment. As well, if someone had better warming up, he or she had lower degree of exercise injury after all. Conclusion: Consequently, according to the data, the research suggested that the male needed more carefulness than the female in exercise. Old age people needed to be more careful of getting sprain of knee and ankle in particular. As well, it concluded that people needed not only enough warming up before doing exercise but also positive habit of exercise in order to minimize the exercise injury.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.8
• /
• pp.1315-1324
• /
• 2009

This study is on the consolidation process of the conservation process of fabric with golden thread found in relics. Gold film was glued to pieces of Korean paper and satin using hide glue, which is a natural adhesive and resin Paraloid B-72, which is a liquid type adhesive. This study examines the types and concentration of the adhesives that are appropriate for consolidating gold film on fabric. The advantage of hide glue is that it is harmless to humans and has a high stability. This glue is also believed to be the closest to the adhesive that was used when the relic was originally made. Its weakness is that it is stiff and weaker than chemical glues, but after being washed with water the adhesion level increases. Therefore, hide glue is appropriate in the following instances: a) when washing after consolidation b) when the substrate of gold threads are significantly damaged, and c) when treating greater sized relics that take a longer time to work on. However, Paraloid B-72 has a better adhesion and flexibility than hide glue, but tends to spread out into a greater area, and the area where it is applied tends to absorb less water than before the application. In addition, it is noxious and can be harmful in long-term exposure. Therefore, Paraloid-72 is appropriate in the following instances: a) when consolidating the fabric after washing, and b) when working on smaller relics and consolidating smaller parts of a relic. The necessary concentration levels for consolidants for gold film are 30% for liquid type hide glue and at least 10% for Paraloid B-72 in order for the gold film to stay intact on the fabric during washing, consolidation, exhibition, and conservation.

• Journal of KIISE:Software and Applications
• /
• v.37 no.8
• /
• pp.629-640
• /
• 2010

The exemplar-based inpainting model is widely used to remove objects from natural images and to restore a damaged region. This paper presents a method which improves the performance of the conventional exemplar-based inpainting model by modifying three major parts in the model: data term, confidence term and patch selection. While the conventional data term is calculated using the local gradient, the proposed method uses 16 compass masks to get the global gradient to make the method robust to noise. To overcome the problem that the confidence term gets negligible in the inside of the eliminated region, a method is proposed which makes the confidence term decrease slowly in the eliminated region. The patch selection procedure is modified so that the closer patch has higher weight. Experiments showed that the proposed method produced more natural images and lower reconstruction error than the conventional exemplar-based inpainting.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.494-505
• /
• 2014

Residential site should have pedestrian road passing through the center of the site just for convenience and safety. However, apartment complexes developed in the past, the sites are just stuck by walls and pedestrian roads are not placed, inhabitans have difficulties for facility use and safety. Therefore, residents solve the problems as follows: they utilize the spaces, between apartment building and the wall, as walking route, and demolish the parts of the wall for connecting sites. In this study, it was thought that pedestrian road could be emplaced at the wall space between sites. For this, a low-rise apartment complex in Gwangju was selected developed in 1990s, and whether the space for pedestrian road was examined. The width from 2.4m to 8.0m could be secured, and there could be placed the pedestrian road at the wall space. However, this study is limited for the possibility of securing space, for the opinion of residents that might be damaged from the pedestrian road did not reviewed.

• Earthquakes and Structures
• /
• v.11 no.4
• /
• pp.629-648
• /
• 2016

This paper deals with 111 buildings built between 1962 and 1987, from various parts of the city of Osijek, for which, through the collection of documentation, a database is created. The aim of this paper is to provide the first steps in assessing seismic risk in Osijek applying method based on vulnerability index. This index uses collected information of parameters of the building: the structural system, the construction year, plan, the height, i.e., the number of stories, the type of foundation, the structural and non-structural elements, the type and the quality of main construction material, the position in the block and built-up area. According to this method defining five damage states, the action is expressed in terms of the macroseismic intensity and the seismic quality of the buildings by means of a vulnerability index. The value of the vulnerability index can be changed depending on the structural systems, quality of construction, etc., by introducing behavior and regional modifiers based on expert judgments. Since there is no available data of damaged buildings under earthquake loading in our country, we will propose behavior modifiers based on values suggested by earlier works and on judgment based on available project documentation of the considered buildings. Depending on the proposed modifiers, the seismic vulnerability of existing buildings in the city of Osijek will be assessed. The resulting vulnerability of the considered residential buildings provides necessary insight for emergency planning and for identification of critical objects vulnerable to seismic loading.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.15-21
• /
• 2010

Structural analysis used to evaluate the load carrying capacity of a bridge should implement behavioral characteristics similar to the actual behaviors of the structure through loading tests, but it is not feasible in many cases due to the behavioral characteristics of points, inadequate modeling method in structural analysis, errors in loading tests, changes in strength and rigidity resulting from cross-sectional damage, etc. This problem can be more serious if bridge bearings have been damaged or were not installed and, consequently, the bearings do not function properly. This study produced results similar to actual behaviors using a structural analysis model built with support moment derived from the difference $\Delta{\delta}$ between measured deflection obtained by confining the cantilever segment of a solid beam and calculated deflection under a unrestrained condition. When the load carrying capacity of a bridge in operation was evaluated in consideration of the confinement condition of supports, the result was 15~19% lower than load carrying capacity calculated by the existing method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.443-448
• /
• 2010

Rapid advance in information technology requires high performance devices with compact size. Integrated multi-layer electronic element with different functions enables those compact devices to possess various performances and powerful capabilities. In mass production, the multi-layer electronic element is manufactured as a bulk type with a large number of parts for productivity. However, this may cause the electronic part to be damaged in the cutting process of the bulk elements to separate into each part. Therefore the cutting performance of multi-layer element bulk is playing an important role in the view of production efficiency. This study focuses on the cutting characteristics of multi-layer electronic elements. In order to increase the efficiency, the vibration cutting method was applied to the blade cutting machine. Flexure hinge structure, which is an physical amplifier of increasing displacement, was attached to the vibration cutting device for machining efficiency. The behaviors of flexure hinge were modeled with Lagrange equation and simulated with finite element method (FEM). Performance of hinge structure was verified by experimental modal analysis (EMA) for hinge structure to be tuned to the specific mode of vibrations. Cutting experiments of multi-layer elements were conducted with the proposed vibrating cutting module, and the characteristics was analyzed.

• Advances in Traditional Medicine
• /
• v.7 no.2
• /
• pp.103-113
• /
• 2007

This study is a report on recently discovered medical records based on traditional medicine in the 1900s. First, the contents of the records and their significance are described in detail. Next, a simple example of the research follows, in order to explain the medical and historical significance the records contain and to answer the question of how this historical document can contribute to future medical and historical studies. The documents dealt with in this study, the Chunggang Medical Records, are medical records compiled by a Korean doctor of oriental medicine by the name of Younghun Kim who practiced in the center of Seoul for a period of over 60 years. The records, which eventually amounted to over 1,500 books, were made known to the academic world when the descendents recently donated them to Kyunghee University. The reason these medical records attract so much attention from academic circles, even though they are the work of one individual, is that they contain abundant information on general public medical health at the time, in addition to the fact that Kim Younghun was a well known figure among Oriental Medicine doctors in Korea. The medical records start in 1915 and continue until Kim Younhun's death in 1974, though they have some damaged or missing parts. Kim's medical records are a gold mine not only for scholars studying the medical history of the early 1900s, but also for doctors trying to emulate the techniques embedded in a great predecessor's medical practice.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.19 no.1
• /
• pp.39-48
• /
• 1989

Six to eight-month-old female albino rats were used as experimental animals. As an irradiation equipment, a Co-60 was used. The experimental animals were divided to; 6 of the control group, 12 of the 500cGy single irradiation group, 12 of the 1000cGy fractionated irradiation group, and 12 of the 1500cGy fractionated irradiation group. From the first week to the forth, 3 rats were picked from each group every week to be sacrificed and fixed with formalin. Those rats were observed by means of H-E stain after being taken radiograph and decalcified. The analysis of radiographic findings and light microscopic findings gives results as follows: 1. The delay of dental eruption rate was found in every group which underwent the irradiation experiment. Dentin niche, osteodentin, and dentin island were formed in the parts which were damaged by the irradiation. 2. The longer the observation period was, the more deposit of osteodentin and dentin island was formed. 3. In the single irradiation group, the damage effect was in proportion to the increase of radiation dose, whereas the damage was much less in the fractionated group receiving the same dose. 4. The 500cGy single irradiation group got temporary repairable damage, while the 1000cGy single irradiation group got considerable damage and showed much slower eruption rate than the 500cGy single irradiation group. The basal portion of the 1500cGy single irradiation group, whose growth was arrested, was destroyed. 5. The fractionated group were irradiated 500cGy everyweek. Repair was visible during the interval periods. The damage was accumulated as irradiation repeated, but degree of damage was lower than that of the 1000cGy and 1500cGy single irradiation group.