• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.27-31
• /
• 2010

It is a well known fact that the LCD and Semiconductor Devices are a central part of IT industry which is important in the present and the future. But the biggest problem of Semiconductor and LCD manufacturing is maintaining a cleaning room environment. For this reason, the soft X-ray type Ionizer was used as the electrostatic reducer device, which protects damage of the product against electrostatic discharge in the manufacturing process. Therefore it is a essential important factor during Semiconductor and LCD production process. But the soft X-ray has a intrinsic problem with harmful to human being in case of soft X-ray exposure. That's reason we have the research to solve above problem and made an apparatus that it was covered with shielding structure to protect X-ray radiation to outside. And besides, it has a possibility to eliminate the charged electrostatic in the narrow space through the slot for Ion emissions with dual soft X-ray sources on the both side. It is also not make the particles from itself when it has been operated.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.98-102
• /
• 2019

Direct plasma-enhanced atomic layer deposition (PEALD) are widely used for $SiO_2$ and SiON thin film process in current semiconductor industry. However, this exhibits poor step coverage for three-dimensional device structure due directionality of plasma species as well as plasma damage on the substrate. In this study, to overcome this issue, low temperature (< $300^{\circ}C$) $SiO_2$ and SiON thin film processes were studied using inductively coupled plasma (ICP) type remote PEALD with various reactant gases such as $O_2$, $H_2O$, $N_2$ and $NH_3$. It was confirmed that the interfacial properties such as fixed charge density and charge trapping behavior of thin films were considerably improved by hydrogen species in $H_2O$ and $NH_3$ plasma compared to the films grown with $O_2$ and $N_2$ plasma. Furthermore, the leakage current density of the thin films was suppressed for same reason.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.413-422
• /
• 2022

Blast Hardened Bulkheads (BHB) are used to suppress damage propagation by internal explosions to reduce ships'vulnerability. However, for this reason, the weight of the ship inevitably increased, and other functions such as the ships'mobility were bound to deteriorate. Therefore, it is essential in the initial design of the ship to optimize the dimensions of the bulkhead to minimize the weight while decreasing the vulnerability of the ship. Research on design optimization of BHB has been conducted, but it has not considered explosive load in various hit scenarios. This study proposed an optimal design method for the curtain plate type blast hardened bulkhead, which is currently frequently applied by the Korean Navy in consideration of various hit scenarios. Using genetic algorithms, multiobjective design optimizations that minimize weight increase as well as minimize damage to ships were obtained. By optimizing the dimensions of the BHB considering various hit scenarios, the ship's vulnerability was improved while maintaining its mobility due to weight reduction.

• Composites Research
• /
• v.26 no.3
• /
• pp.201-206
• /
• 2013

The electrical resistance measurement was investigated as a damage monitoring method. In this study, 0.5 wt% Carbon nanotube reinforced polypropylene (CNT/PP) composites were evaluated under compressive fatigue loading. The shape of specimens was $20^{\circ}$ curved round type. Compression strength and electrical resistance were measured at different sections of specimen during compression. The microcracks of CNT/PP composites were detected based on the changing ratio of electrical resistance. Micro-damage during compressive fatigue test could be detected by electrical resistance measurements. The reason is that the contact points of CNTs in composites decreased under fatigue loading. During compressive fatigue test, larger change of electrical resistance was detected at the microcrack sections. It was proved that microcracks could be detected by electrical resistance measurement under compression test, whereas the real delamination parts were consistent with the predicted results by electrical resistance measurement.

• The Plant Pathology Journal
• /
• v.24 no.3
• /
• pp.357-360
• /
• 2008

Several pathotypes have been recognized in citrus bacterial canker, which causing serious damage in citrus cultivation area. To control the disease, it is important to understand the pathological diversity and reason of difference in virulence of the causal pathogen. We analyzed 124 strains of Xanthomonas causing citrus bacterial canker by southern hybridization with an internal 3.4-kb BamHI fragment from pthA gene. Assuming each band represented an intact gene, each strain of Xanthomonas was estimated to have approximately 1 to 4 copies of pthA gene. X. a. pv. citri A type had more than 3 copies of pthA gene, and the number of pthA gene in X. a. pv. citri $A^*,\;A^w$, and X. a. pv. aurantifolii B, C were different from 1 to 3 according to the strains. When the pthA gene profile was classified into 13 groups according to the number and size of hybridization bands, most of the A types belong to the 3A group, and 4A and 4B type was dominant when they had 4 bands. However, there was no general pattern of difference between the virulence and pthA gene group in this test.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.61-61
• /
• 2009

This paper has been performed in order to figure out the reason of failure in T23 weldments used for boiler tube at 550 $^{\circ}C$. Defects such as cracks and cavities occurred in CGHAZ (coarse grain heat-affected-zone) and multi pass of weld metal, and these crack propagated along grain boundary. Microstructure evolution such as grain growth and carbide precipitation was investigated by optical microscope (OM), transmission electron microscope(TEM). Moreover, Auger electron spectroscope (AES) was employed in order to examine segregation along the grain boundaries. There is significant difference in grain size and precipitation distribution in the region where cracking took place. In addition, sulfur segregation was observed. Based on the results of this investigation, it has been possible to establish that this type of cracks were consistent with reheat cracking and creep damage. Selection of optimal filler metal, heat input, and PWHT temperature is required for prevention in order to avoid this type of cracking.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1831-1840
• /
• 2018

During a power swing, distance relays may mistakenly spread fault throughout the power grid, causing a great deal of damage. In some cases, such mistakes can cause global outages. For this reason, it is critical to make a distinction between power swings and faults in distance relays. In this paper, a new method is proposed based on RMS measurement to differentiate between faults and power swings. The proposed method was tested on two standard grids, demonstrating its capability in detecting a power swing and simultaneous fault with power swing. This method required no specific configurations, and was independent of grid type and zoning type of distance relays. This feature in practice allows the relay to be installed on any grid with any kind of coordination. In protective relays, the calculations applied to the microprocessor is of great importance. Distance relays are constantly calculating the current RMS values for protection purposes. This mitigates the computations in the microprocessor to detect power swings. The proposed method was able to differentiate between a fault and a power swing. Furthermore, it managed to detect faults occurring simultaneously with power swings.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.4
• /
• pp.256-259
• /
• 2013

Botulinum toxin type A (BTX-A) inhibits muscle contraction, which leads to reversible muscle atrophy and paralysis. Therefore, BTX-A injection can be an effective treatment of facial asymmetry that originated from the uncoordinated muscle movement. A 52-year-old patient was referred from another hospital for the correction of post-traumatic sequelae. The patient had prominent scar in the mandibular symphysis area with asymmetric lower lip movement. The reason for this asymmetric lower lip movement was due to damage in the lower lip depressor muscle. After the injection of BTX-A on the lower lip depressors, asymmetric lip movement has been improved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.899-902
• /
• 1997

The heat generated during surface grinding process can lead to elevate a grinding temperature, which cause the thermal damage to the workpiece material. Because of this reason, it is important to be able to predict the temperature which is occurred during grinding. The process parameters, therefore, should be adjusted properly to yield the acceptable workpiece temperature. In this study, we conducted an experimentation to obtain and also to analyze the temperature distribution of the workpiece with accordance in varying the grinding condition. For measuring the workpiece temperature, thermocouples of the CA type were inserted into the predetermined locations of the workpiece.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.2
• /
• pp.91-100
• /
• 2021

Agricultural corrugated fiberboard packaging boxes frequently experience damage due to loading and unloading, vibration during transport, and shock by dynamic distribution condition change. This study was carried out to estimate effect of vibration during distribution process on compression strength of corrugated fiberboard boxes for agricultural products. In order to identify the degradation caused by vibration, after box packaging the agricultural products(tangerine or cucumber), the natural frequencies of the packaging boxes were measured by varying the relative humidity(50, 70 and 90%) at 25℃ temperature. Various types of corrugated fiberboard boxes were packed with tangerines and cucumbers, and the PSD plot vibration tests were conducted by utilizing the actual vibration recording results of the Gyeongbu Expressway section between Seoul and Gimcheon. As a result of the experiment, the decrease in compression strength of the box was relatively low in DW-AB, and the decrease in compression strength of the SW-A 0201(RSC) type box was the highest at 20.49%. In particular, both SW-A and DW-AB showed low compression strength degradation rates for open folder type boxes. The moisture content varies depending on the type of the box or agricultural products, and the enclosed 0201(RSC) type box was generally higher than the open folder or bliss type box, which is believed to be the reason for the decrease in compression strength of RSC type box due to humidity. By the agricultural product, the percentage of decrease in compression strength of box packed with cucumbers was especially high.