• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.619-626
• /
• 2009

The use of thin-walled flexural members has proven to be a practical way to achieve the lowest cost in the construction of prefabricated long-span, low-rise building frames in steel. On the other hand, most of these structures are subjected to corrosion due to environmental exposure, which can reduce their carrying capacity. Corrosion damage is a serious problem for these structures as it causes thickness loss. That is, the class of a section (plastic, compact, non-compact, or slender) may change from one to another due to the loss of thickness of the compression flange and web due to corrosion. In this study, the effects of corrosion on thin-walled members in long-span steel frames were evaluated with regard to the moment-rotation curve, initial stiffness, maximum load capacity, stiffness in the post-maximum capacity, and energy absorption.

• The Korean Society of Law and Medicine
• /
• v.15 no.2
• /
• pp.63-89
• /
• 2014

In 1976, the Dalkon Shield-intrauterine device injured several thousand women in U.S.A. which caused the changes of medical deivce regulation. The Medical Device Regulation Act or Medical Device Amendments of 1976 (MDA) was introduce. As part of the process of regulating medical devices, the MDA divides medical devices into three categories. The class II, and III devices which have moderate harm or more can use the section 510 (k), premarket notification process if the manufacturer can establish that its device is "substantially equivalent" to a device that was marketed before 1976. In 21 U.S.C. ${\S}$ 360k(a), MDA introduced a provision which expressly preempts competing state laws or regulations. After that, the judicial debates had began over the proper interpretation and application of Section 360(k) In February 2008, the U.S. Supreme Court ruled in Riegel v. Medtronic that manufacturer approved by the Food and Drug Administration (FDA)'s pre-market approval process are preempted from liability, even when the devices have defective design or lack of labeling. But the Supreme Court ruled in Medtronic Inc. v. Lora Lohr that the manufactures which use the section 510 (k) process cannot be preempted and in Bausch v. Stryker Corp. that manufactures which violated the CGMP standard are also liable to the damage of patient at the state courts. In 2009, the Supreme Court ruled in Wyeth v. Levine that patients harmed by prescription drugs can claim damages in state courts. This may cause a double standard between prescription drugs and medical devices. FDA Preemption is the legal theory in the United States that exempts product manufacturers from tort claims regarding Food and Drug Administration approved products. FDA Preemption has been a highly contentious issue. In general, consumer groups are against it while the FDA and pharmaceutical manufacturers are in favor of it. This issues also influences the theory of product liability of U.S.A. Complete immunity preemption is an issue need to be more declared.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.2
• /
• pp.1-18
• /
• 2017

Metal fatigue is an important aging mechanism that material characteristics can be deteriorated when even a small load is applied repeatedly. An accurate fatigue evaluation is very important for component structural integrity and reliability. In the design stage of a nuclear power plant, the fatigue evaluations of the Class 1 components have to be performed. However, operating experience shows that the design evaluation can be very conservative due to conservatism in the transient severity and number of occurrence. Therefore, the fatigue monitoring system has been considered as a practical mean to ensure safe operation of the nuclear power plants. The fatigue monitoring system can quantify accumulated fatigue damage up to date for various plant conditions. The purpose of this paper is to describe the fatigue monitoring procedure and to introduce the fatigue monitoring program developed by the authors. The feasibility of the fatigue monitoring program is demonstrated by comparing with the actual operating data and finite element analysis results.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.2
• /
• pp.336-344
• /
• 2010

Stage costumes are characterized by the importance as a medium of total visual expression on a synthetic art and need to be designed more effectively. This study followed the stage costumes of the play 'Long long time ago whuo-ee whuoee' which participated in the China-Japan-Korea University Theatre Festival. By consisting of the framework of a Korean story that tells and expands the visual expression province by the access method of a producer, the unique costume in the play was created by the dyeing of the traditional hangi. First, the use of hanji in theater represents originality and a fresh variation with the formative beauty of stage costumes in accordance with hanji that conforms to the recreation of tradition. Second, the dip dyeing technique made it possible to express colors limitlessly and the airbrush dyeing technique along with dyeing twice could account for the weak points of the color. As a result, the color brought effect as expected. Third, the weak points were supported by a Jumchi technique that created the fibroid material tangled with stronger adhesion in the creation of a hangi costume. In addition, dyed hangi was attached to the outer fabric. It allowed the costume to have a unique texture that was both soft and tough. This enforced the visualization of the costume and durability to prevent possible damage by the performers. Forth, pieces of hanji were attached to the damaged parts of the costume after re-visiting the dress rehearsal. As a result, the stage costumes represented the shabby clothes that express the social class of the characters. A new understanding of the excellence of traditional hanji was found and confirmed the possibility of it as a material for stage costumes through the study.

• Journal of Ginseng Research
• /
• v.31 no.3
• /
• pp.159-174
• /
• 2007

Pharmacology of Korean Red ginseng gives us unique possibility to develop new class of antiepileptic drugs today and to improve one's biological activity. The chemical structures of ginsenosides (GS) have some principal differences from well-known antiepileptic new generation drugs. The antiepileptic effect of GS was also demonstrated in all models of epilepsy in rats (young and adult), which have studied, in all models of epilepsy including status epilepticus (SE), induced by lithium - pilocarpine. In our experiments in rats new evidences on protective effects were exerted as a result of premedication by GS. Pre-treatment of several GS could induce decrease of the seizures severity and brain structural damage (by MRI), neuronal degeneration in hippocampus. Wave nature of severity of motor seizures during convulsive SE was observed during lithium-pilocarpine model of SE in rats (the first increase of seizures was 30 min after the beginning of SE and the second - 90 min after. The efficacy of treatment on SE by ginsenoside as expected was observed after no less 3 weeks by daily GS i.p. administration. It is blocked SE or significantly decrease the severity of seizures during SE. The implication of presented data is that combination of ginsenosides from Korean Red ginseng and ginseng cell culture Dan25 that could be applied for prevention of epileptical status development. However, a development of optimal ratio of different ginsenosides $(Rb_1$ Rc, Rg, Rf,) should consummate in the new antiepileptic drug development.

• 보존과학연구
• /
• s.17
• /
• pp.123-160
• /
• 1996

There have been many studies and experiments regarding exhibition lighting. Many experiments on photochemical damaging effect and visibility resulted in a practice limited to assigning light levels and adjusting annual exposure time. The three damaging factors to the artifacts are intrinsicsusceptibility to absorb radiant energy, spectral distribution of light source and intensity of illumination and time of exposure. Dividing all the artfacts into three categories to suggest a recommended illuminance level causes some problems. Blue wool, for example, used as the reference material for susceptibility, is not a standard material representing museum artifacts. In the most light sensitive category, ISO class I or anything below have been excluded. The exposure time of one soure can be three times more than another sourece. The spectral distribution of the light source and the relative spectral responsibility of the artifact are not considered in the practice. So in case of very light sensitive material, the recommended illuminance is only the referring value and it is indispensable to check the characteristic of susceptibility of each artifacts. Daylighting is prevailing method to solve the psychological need of the visitors. However, it sould transparent, and should not diffused, and the green-house effect must be considered. llluminance uniformity should based on the maximum illuminance to handle the limitation of exposure for the conservation of a large sensitive object such as a painting. Damage index is not absolute reference for selecting the lighting source because it is experimented from the paper of low grade then calculated. Visibility should be increased by reducing the visual noiseand by planning of appropriate luminance contrast. This paper reviews the problems with the previous studies and experiment sand the current exhibition lighting design practice. The plan for museum showcase lighting is to check the susceptibility and to raise the visibility simultaneously.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.213-220
• /
• 2015

This study was carried out to determine the distribution of factors as effected by debris flow in Ulsan and Pusan metropolitan areas because mainly debris flow caused by typhoons and local heavy rainfall events is mainly attributed to damage of human being ad property. The high risk degree of debris flow was to affected by east (20%), northeast (20%) and northwest (20%) slopes with stand age class with elevation (69%) of 100-200 (33%). Also, the risk was high in high erosion collapse degree with slope degree of $20-25^{\circ}$ with over 300 mm (100%) of maximum daily rainfall events and 50-100 mm (50%) or >100 mm (50%) of maximum hourly rainfall events with <5 km of stream path and <50 ha of catchment area. Landslide debris and wood residue flow was also related to igneous rocks (73%) and bank collapse types of debrs flow (57%).

• The Journal of Korean Association of Computer Education
• /
• v.10 no.6
• /
• pp.11-18
• /
• 2007

The proposed virtual laboratory system for digital logic circuits is composed of two main sessions, which are concept-learning session and virtual experiment session by virtual digital kit. During concept-learning session the learners can easily understand the important principles in the digital circuits to be performed. In addition, during virtual laboratory session the virtual experiments are performed by assembling and connecting the circuits on the virtual bread board, applying input voltages, making the output measurements, and comparing and transmitting the virtual experimental data. Every activity done during the virtual laboratory session is recorded on database and will be provided with the learners as a preliminary report form including personal information. Thus, the educators may check out the submitted preliminary report to estimate how well the learners understand the circuit operations. Finally, in order to show the validity of our virtual laboratory system we investigated and analysed the damage rate of real experimental equipment during class and assessed student performance on the five quizzes for one semester.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.4
• /
• pp.167-173
• /
• 2018

Objectives: Classification of the degree of postoperative nerve damage according to contact with the mandibular canal and buccal cortical bone has been studied, but there is a lack of research on the difference in postoperative courses according to contact with buccal cortical bone. In this study, we divided patients into groups according to contact between the mandibular canal and the buccal cortical bone, and we compared the position of the mandibular canal in the second and first molar areas. Materials and Methods: Class III patients who visited the Dankook University Dental Hospital were included in this study. The following measurements were made at the second and first molar positions: (1) length between the outer margin of the mandibular canal and the buccal cortical margin (a); (2) mandibular thickness at the same level (b); (3) Buccolingual $ratio=(a)/(b){\times}100$; and (4) length between the inferior margin of the mandibular canal and the inferior cortical margin. Results: The distances from the canal to the buccal bone and from the canal to the inferior bone and mandibular thickness were significantly larger in Group II than in Group I. The buccolingual ratio of the canal was larger in Group II in the second molar region. Conclusion: If mandibular canal is in contact with the buccal cortical bone, the canal will run closer to the buccal bone and the inferior border of the mandible in the second and first molar regions.

• Convergence Security Journal
• /
• v.16 no.3_2
• /
• pp.33-42
• /
• 2016

While evolving information-oriented society provides a lot of benefits to the human life, new types of threats have been increasing. Particularly, cyber terrorism, happen on the network that is composed of a computer system and information communication network, and the mean and scale of damage has reached a serious level. In other words, it is hard to locate cyber terror since it occurs in the virtual space, not in the real world, so identifying "Who is attacking?" (Non-visibility, non-formulas), or "Where the attack takes place?" (trans-nation) are hard. Hackers, individuals or even a small group of people, who carried out the cyber terror are posing new threats that could intimidate national security and the pace and magnitude of threats keep evolving. Scale and capability of North Korea's cyber terrorism are assessed as world-class level. Recently, North Korea is focusing on strengthen their cyber terrorism force. So improving a response system for cyber terror is a key necessity as North Korea's has emerged as a direct threat to South Korean security. Therefore, Korea has to redeem both legal and institutional systems immediately to perform as a unified control tower for preemptive response to cyber terrors arise from North Korea and neighboring countries.