• Journal of Ginseng Research
• /
• v.43 no.4
• /
• pp.517-526
• /
• 2019

Background: The root of Panax ginseng, a member of Araliaceae family, has been used as herbal medicine and functional food in Asia for thousands of years. According to Traditional Chinese medicine, ginseng is the most widely used "Qi-invigorating" herbs, which provides tonic and preventive effects by resisting oxidative stress, influencing energy metabolism, and improving mitochondrial function. Very few reports have systematically measured cell mitochondrial bioenergetics after ginseng treatment. Methods: Here, H9C2 cell line, a rat cardiomyoblast, was treated with ginseng extracts having extracted using solvents of different polarity, i.e., water, 50% ethanol, and 90% ethanol, and subsequently, the oxygen consumption rate in healthy and tert-butyl hydroperoxideetreated live cultures was determined by Seahorse extracellular flux analyzer. Results: The 90% ethanol extracts of ginseng possessed the strongest antioxidative and tonic activities to mitochondrial respiration and therefore provided the best protective effects to H9C2 cardiomyocytes. By increasing the spare respiratory capacity of stressed H9C2 cells up to three-folds of that of healthy cells, the 90% ethanol extracts of ginseng greatly improved the tolerance of myocardial cells to oxidative damage. Conclusion: These results demonstrated that the low polarity extracts of ginseng could be the best extract, as compared with others, in regulating the oxygen consumption rate of cultured cardiomyocytes during mitochondrial respiration.

• Journal of Environmental Science International
• /
• v.30 no.3
• /
• pp.235-243
• /
• 2021

This study was conducted to investigate the growth of Dendranthema zawadskii in damaged soils when they are treated with improvement agents. The treatments consisted of a control (unamended field soil) and the application of a loess ball of 1 cm to the field soil. According to the degree of damage the de-icing agent had caused, the soils were divided into 3 areas (based on the yellowing of Pinus densiflora for. multicaulis in soil surveys): H (high saline), M (medium saline), and L (low saline). A total of six treatments were performed: D. zawadskiia plant without soil amendment (H; high saline soil, M; medium saline soil, L; low saline soil), and a D. zawadskiia plant with loess ball on the soil surface (H.L; high saline soil with loess ball, M.L; medium saline soil with loess ball, L.L; low saline soil with loess ball). The results showed that D. zawadskiia growth went from highest to lowest in the order: M.L > L.L > M > L > H.L > H. Plant growth results showed that soils treated with soil amendments (loess ball) were better for D. zawadskii growth than untreated soils.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.4
• /
• pp.510-519
• /
• 2021

The pathological impact of haze upon the phyllosphere microbiota awaits investigation. A moderate degree of haze environment and a clean control were selected in Chengdu, China. Artemisia argyi, a ubiquitously distributed and extensively applied Chinese herb, was also chosen for experiment. Total genome DNA was extracted from leaf samples, and for metagenome sequencing, an Illumina HiSeq 2500 platform was applied. The results showed that the gene numbers of phyllosphere microbiota derived from haze leaves were lower than those of the clean control. The phyllosphere microbiota derived from both haze and clean groups shared the same top ten phyla; the abundances of Proteobacteria, Actinomycetes and Anorthococcuso of the haze group were substantially increased, while Ascomycetes and Basidiomycetes decreased. At the genus level, the abundances of Nocardia, Paracoccus, Marmoricola and Knoelia from haze leaves were markedly increased, while the yeasts were statistically decreased. KEGG retrieval demonstrated that the functional genes were most annotated to metabolism. An interesting find of this work is that the phyllosphere microbiota responsible for the synthesis of primary and secondary metabolites in A. argyi were significantly increased under a haze environment. Relatively enriched genes annotated by eggNOG belong to replication, recombination and repair, and genes classified into the glycoside hydrolase and glycosyltransferase enzymes were significantly increased. In summary, we found that both structure and function of phyllosphere microbiota are globally impacted by haze, while primary and secondary metabolites responsible for haze tolerance were considerably increased. These results suggest an adaptive strategy of plants for tolerating and confronting haze damage.

• Composites Research
• /
• v.21 no.3
• /
• pp.9-17
• /
• 2008

In this paper, the low velocity impact characteristics of filament winding CFRP pressure vessel was investigated using numerical and experimental methods. The cylinder part of CFRP vessel was impacted using triangular shape impactor which simulated the sharp edge of dropping tools and impact response behavior of CFRP was reviewed. The mechanical behavior, such as deformation and stress distribution, were also predicted by explicit finite element method and the validity of the model was investigated. For the quantitative evaluation of the residual strength of the pressure vessel after impact, a series of the ring specimens was cut from the impacted vessel and its burst pressure was measured by hydraulic pressure hoop tension test. As the results, the relationship between the residual strength degradation and the impact energy was successively obtained and a useful methodology to evaluate quantitatively the impact damage tolerance of CFRP pressure vessel was established.

• Advances in concrete construction
• /
• v.15 no.3
• /
• pp.203-213
• /
• 2023

New techniques, technologies, and materials should be used to design and build sports stadiums. Since this century, much progress has been made in covering the roofs of sports stadiums, and the possibility of accurate computer calculation has been provided for stadiums, so by choosing a new structure, we can double the beauty and resistance of these stadiums. A stadium has an excellent and valuable design when its structure, shell, building, materials, and joinery follow a high architectural idea at all levels and scales. This article examines the mechanical performance of polymer cement strength in the construction of football stadiums, along with their structural knowledge in the form of the best examples in the world. Portland cement is one of the most used materials for constructing football stadiums. However, its production requires spending a lot of money, wasting energy, and damaging the environment. Considering the disadvantages in the production and consumption of concrete in different environments, it is necessary to find alternative materials. It should be used with cheaper, simpler technology, abundant primary resources, energy saving, less environmental damage, and better chemical and physical properties in concrete. High-strength concrete technology is considered a new development in the construction industry of concrete structures. In hardened concrete, strength and durability are two main factors, and as the compressive strength of concrete increases, concrete becomes more brittle. As a result, its tensile strength does not increase in proportion to the increase in compressive strength and has less strain tolerance. For this reason, the need to use is evident from the fibers in high-strength concrete. Fibers are used in concrete to increase tensile strength, prevent crack propagation, and significantly increase softness. The increase with the change of these resistances depends on the strength of concrete without fibers, the shape of fibers, and the percentage of fibers. This cement is obtained from the wastes of chemical and petrochemical industries and the wastes from coal combustion, which have the properties mentioned as substitutes for Portland cement.

• Plant Biotechnology Reports
• /
• v.1 no.1
• /
• pp.19-25
• /
• 2007

To develop an efficient screening method for detection of the transgene in Chinese cabbage (Brassica rapa spp. pekinensis) utilizing Basta spray, optimal conditions for Basta application were examined in this study. Two transgenic Chinese cabbage lines were obtained through Agrobacterium-mediated transformation and used as transgenic positive controls in the Basta screening experiment. Differential concentrations of glufosinate-ammonium were sprayed into three different growth stages of 12 commercial Chinese cabbage cultivars. The results showed that no plants could survive higher than 0.05% glufosinate-ammonium, and plants at the 2-3 leaf stage were most vulnerable to glufosinate-ammonium. On the other hand, no damage was observed in the transgenic control plants. Reliability of the Basta spray method was proven by showing perfect co-segregation of the tolerance to glufosinate-ammonium and the presence of the bar gene in T₁ segregating populations of the transgenic lines, as revealed by both PCR and Southern blot analyses. Using the developed Basta screening method, we tried to investigate the transgene flow through pollen dispersal, but failed to detect any transgene-containing non-transgenic Chinese cabbages whose parents had been planted adjacent to transgenic Chinese cabbages in field conditions. However, the transgene was successfully detected using Basta spray from the non-transgenic plants bearing the transgene introduced by hand-pollination. Since the Basta spray method developed in this study is easy to apply and economical, it will be a valuable tool for understanding the mechanism of gene flow through pollen transfer and for establishing a biosafety test protocol for genetically modified (GM) Chinese cabbage cultivars.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1887-1894
• /
• 2024

Fatigue strength of the structural materials of lead-cooled fast reactors (LFRs) and accelerator-driven systems (ADS) may be degraded in liquid metal (Lead or lead-bismuth eutectic (LBE)) environments. The fatigue crack growth (FCG) data of structural materials in liquid LBE are necessary for damage tolerance design, safety assessment and life management of key equipment. A novel monitoring system for fatigue crack length was designed on the compliance method and the monitor technology of crack opening displacement (COD) of CT specimens by the linear variable differential transformers (LVDT) system. It can be used to predict the crack length by monitoring the COD of CT specimens in harsh high-temperature liquid LBE using a LVDT system. The prediction accuracy of this system was verified by FCG experiments in room temperature air and liquid LBE at 150, 250 and 350 ℃. The first results obtained in the FCG test for T91 steel in liquid LBE at 350 ℃ are presented.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.26-32
• /
• 2014

'Dahan' (Avena sativa L.), a winter oat cultivar for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute Crop Science (NICS), Rural Development Administration (RDA) in 2011. It was derived from an original cross between $F_1$[Sprinter/73625] and 'Gwiri26'. Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Suwon. A line, 'SO99027-GB-B-113-4-4-3', was selected for cold tolerance and good agronomic characteristics and as a line name of 'Gwiri75'. The line 'Gwiri75' was subsequently evaluated for cold tolerance and forage yield during 3 years in four region such as Yesan, Iksan, Kimjae, and Jeju, from 2009 to 2011 and finally named as 'Dahan'. Though similar in heading date to the check cultivar Samhan, 'Dahan' had tall plant length and lodging resistance. It's average forage dry matter yield harvested at milk-ripe stage was 15.6 ton $ha^{-1}$, compared with 14.1 ton $ha^{-1}$ of check cultivar. Cultivar 'Dahan' was lower to the check cultivar 'Samhan' in protein content (8.4% and 9.9%, respectively), while it was superior to the check cultivar in total digestible nutrients (TDN) (60.8% and 59.3%, respectively), and in TDN yield $ha^{-1}$ (9.5 ton and 8.4 ton, respectively). Fall sowing of 'Dahan' is recommended only in the areas where daily minimum mean temperatures are averaged higher than $-7^{\circ}C$ in January, and excluded in mountain area where frost damage is presumable.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.452-457
• /
• 2009

The objective of this study was to provide fundamental data on breeding cultivar and cultural technique to identify quality characterization according to damage degrees in rice when are damaged at low temperature. For induction of cold damage, we treated the irrigation water at $17^{\circ}C$ from the panicle formation stage to the heading date. The rice products were harvested by grades according to the sterility ratio and investigated 5 items of quality analysis including ripened grain ratio, brown/rough rice ratio, 1000 grain weight of brown rice, protein content, and amylose content. The quality analysis were characterized by each items according to the sterility ratio. As a result, the ripened grain ratio was y=1.0444x-7.6597($R^2=0.9874^{**}$), protein content was y=-0.046x+10.875 ($R^2=0.6973^*$), and head rice ratio was y=-0.2306x+104.32 ($R^2=0.634^*$), but the amylose content, brown/rough rice ratio and the milled/brown rice ratio were not significant. The rice plants, which injured by the low temperature, had bad influence in the yield and quality. Consequently, the breeding of rice cultivar and development of cultural technique are required to improve its cold tolerance.