• 한국식품영양과학회지
• /
• 제38권6호
• /
• pp.674-682
• /
• 2009

국화과(Compositae) 식물 중 인진, 창출 및 민들레 분말이 STZ 유발 당뇨 흰쥐의 혈당 및 혈장 지질 상태에 미치는 영향을 구명하기 위하여 Sprague-Dawley계 흰쥐에게 국화과 식물 분말이 함유된 식이를 4주간 섭취시켜 다음과 같은 결과를 얻었다. 실험 4주 후 체중증가량은 당뇨대조군에 비해 인진섭취군의 경우 유의적인 차이를 보이지는 않았지만 증가하였다. 평균 식이섭취량은 당뇨대조군에 비해 모든 당뇨실험군에서 감소하였으며, 창출섭취군과 민들레섭취군에서 유의적으로 감소하였다. 식이효율은 인진섭취군의 경우 유의적 차이는 없지만 가장 높은 식이효율을 나타내었다. 혈장 포도당 함량을 측정한 결과 당뇨대조군은 고혈당이 지속된 반면 실험 2주째에는 당뇨대조군보다 인진섭취군과 민들레섭취군, 실험 3주째에는 인진섭취군, 실험 4주째에는 인진섭취군과 민들레섭취군이 당뇨대조군보다 유의적으로 낮은 혈당 수준을 보였다. 창출섭취군에서는 실험 1주째부터 실험 4주째까지 당뇨대조군에 비해 유의적인 혈당 감소를 보여 국화과 식물의 섭취가 모두 혈당 상승 억제 효과가 있었다. 간장 글리코겐 함량은 인진섭취군, 창출섭취군 및 민들레섭취군의 모든 당뇨실험군에서 유의적인 차이는 없었으나 당뇨대조군보다 높은 수치를 나타내었다. 근육 글리코겐 함량도 인진섭취군에서 유의적이지는 않지만 당뇨대조군에 비해 높은 수치를 나타내었다. 장기의 무게를 체중 100g당으로 환산하였을 때 간장과 신장의 경우 인진섭취군, 창출섭취군 및 민들레섭취군의 무게가 당뇨대조군보다 유의적으로 낮은 것으로 나타나 간장과 신장의 비대를 억제한 것으로 나타났다. 폐의 경우 민들레섭취군이 당뇨대조군에 비해 낮은 무게를 나타냈다. 췌장, 비장 및 뇌의 경우 창출섭취군이 당뇨대조군에 비해 유의적으로 높은 무게를 나타내어 손상을 억제한 것으로 나타났다. 헤마토크릿치는 창출섭취군과 민들레섭취군에서 당뇨대조군에 비해 유의적으로 낮은 수준을 나타내었다. 인진섭취군의 경우 ALT 활성도는 유의적 차이를 보이지는 않았지만 당뇨대조군보다 낮은 활성도를 나타내어 간과 신장의 손상이 적음을 알 수 있었다. 실험 4주 후 혈장의 지질 함량을 측정한 결과 총콜레스테롤, 중성지방 및 유리지방산 함량이 창출섭취군에서 당뇨대조군에 비해 유의적으로 감소하였다. HDL-콜레스테롤 함량은 유의적인 차이는 보이지 않았으나 인진섭취군과 민들레섭취군에서 효과가 있는 것으로 나타났다. 이상의 실험결과 인진, 창출 및 민들레의 국화과식물의 섭취가 STZ으로 유발된 당뇨쥐의 혈당을 유의적으로 감소시켰으며, 창출의 섭취가 지질대사 이상 중 증가된 혈중 중성지방과 유리지방산을 유의적으로 감소시켰으므로 당뇨 시 혈당조절과 고지혈증 개선에 유익할 것으로 사료된다.

• 한국안광학회지
• /
• 제16권3호
• /
• pp.229-235
• /
• 2011

목적: 본 연구에서는 안경 착용자들이 안경렌즈의 파손으로 인한 안전사고에 노출될 수 있다는 점에 착안하여 국내에 유통되고 있는 안경렌즈의 내충격성을 평가하고자 하였다. 방법: 국내에 유통되고 있는 4개 회사의 제품으로 NK55(${n_{d}}$ = 1.56)소재의 굴절력 -3D, -6D, +3D, +6D를 가지는 안경렌즈 중 코팅을 통한 강화처리를 하지 않은 160개의 안경렌즈를 대상으로 하여 강철구 낙하 시험(Drop Ball Test)을 실시하였다. 즉, 미국 FDA의 기준에 따라 이들 안경렌즈에 약 16 g의 강철구를 높이 127 cm에서 자유낙하 시킨 후 렌즈의 표면형태를 관찰하였다. 결과: 본 연구에서 사용한 다른 4곳 회사에서 제조되는 안경렌즈의 중심두께는 같은 굴절률과 굴절력을 가짐에도 불구하고 그 수치가 동일하지는 않은 것으로 조사되었다. 강철구 낙하시험에서 렌즈 표면에 균열이나 깨짐이 없는 것을 적합한 안전성을 가진 렌즈로 규정하였을 때 +3D, +6D의 볼록렌즈는 모두 안전한 렌즈로 판단되었다. 그러나 상대적으로 중심두께가 얇은 오목 렌즈의 경우 강철구 낙하 시험을 수행하였을 때 렌즈의 깨짐 현상이 두드러지게 나타남을 확인할 수 있었다. 특히 -3D, -6D 오목렌즈의 경우 전체 80개 중 73.8%에 해당하는 59개가 미국 FDA 기준에 부적합한 렌즈로 나타났다. 결론: 본 결과로 미루어 볼 때 안경 구매시 시력교정과 더불어 미적인 면과 가격적인 면도 중요하지만 안경 렌즈의 파손에 의한 사고 또한 무시할 수 없는 사항이라 여겨졌다. 따라서 국내에서도 안경렌즈로 인한 안전사고의 방지를 위하여 강철구 낙하 시험의 의무적인 시행과 더불어 이의 철저한 확인이 시급하다고 판단할 수 있었다.

• 한국유기농업학회지
• /
• 제19권3호
• /
• pp.357-372
• /
• 2011

남부지역 친환경 논 재배에 적합한 나물콩 품종을 선발하고자 풍산나물콩 등 29 품종을 공시하여 밭 재배와 비교하여 생육특성, 습해정도 및 수량성을 비교 검토하였다. 1. 논 재배시 개체당 협수 및 개체당 립수는 밭 재배에 비해 큰 차이로 적었으며, 경태는 대체로 얇았고 성숙기는 공시 품종 대부분에서 밭 재배에 비해 5~14일 정도 지연 되었다. 2. 무 농약(살충제) 재배시 영양생장기에는 땅거미 등의 천적으로 인하여 콩의 생장에 큰 문제는 발생하지 않았으나, 노린재류의 피해는 입비대기에 심했는데, 품종 간 피해 정도가 달라 친환경 논 재배에 적합한 내충성 나물콩 품종 선발이 가능하였다. 노린재 저항성을 보인 품종으로는 소원콩, 풍원콩, 소록콩, 풍산나물콩, 소백나물콩, 광안콩, 푸른콩, 부광콩, 팔도콩 및 녹채콩이었다. 3. 개화기 이후 한 달 이상 지속된 강우와 무 농약(살균제) 재배로 인하여 협의 탄저병 및 종실의 자반병, 미이라병의 감염정도가 품종간 크게 나타나, 친환경 논 재배에 적합한 내병성 나물콩 품종 선발이 가능하였다. 포장에서 병 발생이 적은 품종으로는 팔도콩, 광안콩, 도레미콩, 소명콩, 풍산나물콩, 익산나물콩, 서남콩, 소진콩, 푸른콩, 보석콩, 남해콩 및 소록콩이었다. 4. 공시품종들의 백립중은 9.8~17.2g 범위에 속하였으며 대부분의 품종에서 밭 재배 대비 0.1~3.7g 증가하는 경향이었으나, 일부 품종에서는 오히려 약간 감소하였다. 정부수매 규격상 소립나물콩(선별체 직경 4.0~5.6mm)에 해당되는 품종은 다원콩(9.8g), 다채콩(9.9g), 보석콩(10.3), 서남콩(10.4g), 소강콩(10.7g), 한남콩(11.0g), 소명콩(11.1g) 및 원황콩(11.3g)이었다. 5. 풍산나물콩(266kg/10a)에 비해 수량이 높았던 품종은 소록콩(308kg), 한남콩(288kg), 보석콩(281g), 소원콩(271g)이었으며, 흑색 종피를 가진 다원콩은 146kg에 불과한 낮은 수량성을 나타냈다. 6. 수확된 종자의 발아특성을 살펴보면 평균발아기간은 2일 이내였으며, 대부분의 품종에서 발아세는 77~99%, 최종 발아율은 89~100%로 높은 발아율을 나타냈으나, 다원콩 및 장기콩에서는 경실종자 및 부패립으로 인하여 발아세 및 발아율이 70% 이하로 매우 낮았다. 7. 공시된 나물콩 품종들의 내병성, 내충성, 내도복, 립중, 수량성, 내습성 정도 및 콩나물 특성을 종합적으로 고려해서 판단해 보면 서남콩, 한남콩, 도레미콩, 보석콩, 풍원콩, 광안콩, 소원콩, 다기콩, 팔도콩, 은하콩, 및 풍산나물콩이 높은 수량과 립 크기의 균일한 분포를 나타내어 친환경 논 재배에 유망시 되었다.

• 대한방사선치료학회지
• /
• 제30권1_2호
• /
• pp.177-183
• /
• 2018

목 적 : 체적변조회전방사선치료(VMAT)는 종양의 모양에 맞게 균일하면서도 정밀한 방사선 조사를 하면서 동시에 정상조직의 방사선 손상위험을 줄이는 장점이 있어 뇌암, 두경부암 및 전립선암 등의 종양과 정상장기가 가까운 암의 치료에 사용되고 있다. 본 연구의 목적은 뇌암 및 두경부암 환자의 VMAT 방사선 치료 시 Jaw-Tracking technique(JTT)의 선량학적 유용성을 평가하고자 한다. 대상 및 방법 : 본원에서 VMAT 치료기법으로 방사선치료를 받은 뇌암 및 두경부암 환자 8명을 선택하였다. 환자의 종양 및 정상 장기의 윤곽그리기(contouring) 정보를 Velocity(Varian, USA)의 deformable registration을 이용하여 Rando phantom에 fusion하였다. Varian Eclipse(ver 15.5, Varian, USA)를 사용하여 Jaw-Tracking 사용 유무를 제외하고 환자 치료 시 사용한 beam parameter와 동일하게 치료계획을 진행하였다. 평가 지표로써 target과 OAR의 최대선량, 평균선량을 사용하여 비교하였고 치료계획 검증을 위해 Portal dosimetry를 시행하였다. 결 과 : JTT를 사용했을 경우는 Static-Jaw technique(SJT)을 사용하였을 경우보다 OAR의 상대 선량이 각각 평균선량은 5.24 %, 최대선량은 7.05 % 감소한 것으로 나타났다. 다양한 OAR에서 평균선량과 최대선량의 감소의 범위는 각각 0.01~3.16 Gy, 0.12~6.27 Gy로 나타났다. Target의 경우는 JTT의 경우가 SJT보다 GTV, CTV, PTV의 최대선량이 각각 0.17 %, 0.43 %, 0.37 % 감소하였으며, 평균선량은 0.24 %, 0.47 %, 0.47% 감소하였다. 감마분석은 3 %/3 mm, 통과율 95 % 이상을 통과 기준으로 설정하였고 JTT, SJT 통과율은 각각 $98{\pm}1.73%$, $97{\pm}1.83%$이었다. 실험에 적용된 모든 OAR의 선량을 비교해 보았을 때, JTT을 사용하였을 경우가 SJT보다 MLC 외에 추가적인 jaw 차폐로 인하여 선량이 유의미하게 줄어들었다는 것을 알 수 있었다. 결 론 : VMAT 치료계획을 이용한 방사선 치료시 뇌암, 두경부암과 같이 종양과 정상 장기가 인접한 경우와 MLC를 통한 누설선량을 증가시킬 수 있는 넓은 조사야 및 높은 에너지의 사용을 필요로 하는 방사선 치료 시 JTT를 적용함으로써 종양주변 정상조직의 피폭선량을 낮추고 이로 인해 PTV의 target coverage를 높일 수 있을 것이라 판단된다.

• Journal of Plant Biotechnology
• /
• 제49권3호
• /
• pp.240-249
• /
• 2022

본 연구는 인삼 습해 피해 설정을 확립하고 유전자원을 대상으로 엽록소형광 기법을 이용하여 습해 스트레스 수준을 평가하기 위해 수행되었다. 습해 스트레스 평가는 2년생 묘삼 57개 유전자원 대상으로 25일간 지제부까지 담수처리를 하였다. 피해 정도에 따라 5개 등급으로 분류하여 저항성 유전자원 3개, 감수성 유전자원 3개를 선발하였다. 인삼 유전자원 57개의 지하부 생체중 및 엽록소 함량은 대부분 감소하였고 저항성 유전자원보다 감수성 유전자원의 감소율이 크게 나타났다. 5개의 엽록소형광 매개변수는 습해 스트레스에 노출되는 기간이 길어질수록 증감하는 경향을 보였으며, 특히, Fv/Fm값이 0.8보다 낮으면 광계II의 반응중심이 손상을 입은 상태로 감수성 유전자원의 경우 습해 스트레스에 노출될수록 감소하였다. 본 연구결과에서 유전자원 57개의 최대양자수율(Fv/Fm)은 습해 스트레스 하에서 차이를 보였으며, 습해 스트레스에 저항성을 가진 습해 저항성 유전자원과 감수성 유전자원 간의 차이를 확인할 수 있는 매개변수로 판단되어 인삼 유전자원에 대해 습해 스트레스 수준을 평가할 수 있는 도구로 활용 가능하다고 사료된다.

• 현장농수산연구지
• /
• 제24권3호
• /
• pp.15-24
• /
• 2022

동해안 지역에서 발생되는 대형 산불의 원인은 건조주의보, 영동지역에서 불어오는 강한 바람, 소나무의 단순림, 임도 유무와 상태 등을 들고 있다. 이러한 이유로 2000년 동해안 산불로 삼척시는 전체 피해면적의 약 70%인 17,000ha 이상의 산림이 소실되었다. 이후 삼척의 산불 피해지역은 인공복원와 자연복원을 구분하여 식생 분석을 통해 산림복원(회복) 정도를 파악하는 데 연구의 목적이 있다. 조사 대상지인 삼척 검봉산 일대는 기존 소나무가 우점하는 곳으로 2001년 복원을 위해 소나무, 곰솔, 굴참나무 등을 조림하였고, 일부는 자연복원을 하였다. 복원 이후 21년 지난 현재 삼척 검봉산 일대 산불피해 복원지역의 식생은 크게 굴참나무-소나무군락, 소나무-신갈나무군락, 곰솔-소나무 군락으로 나누어지는 것으로 나타났다. 산불피해지 식생회복은 굴참나무, 소나무, 곰솔 등 조림으로 현재 식생은 산불발생 이전의 임상으로 회복되고 있다. 특히, 산불의 유형 중 지표화 피해지역은 하층 식생의 피해가 크다. 기존의 소나무는 결실된 종자를 비산하여 치수를 발생시켜 자연복원의 속도를 높이고 굴참나무를 활용한 인공복원은 맹아를 발달시켜 본인의 영역을 확장하는 전략을 지니고 있다. 단, 입지적 환경이 동일하다는 전제 조건에서 숲에서 재생 기작이 진행되는 자연 복원보다는 인공복원이 회복시간과 종다양성이 높은 측면에서는 효과적인 것으로 결론을 지을 수 있다. 한편, 산불 발생 초기 굴참나무 조림은 4년 이후 아교목층(4m 이상)까지 부피 생장을 하고 종자 발아에 따른 개체수도 늘어난 모습을 보였다. 현재 소나무와 굴참나무, 신갈나무 군락지 간 수관 경쟁으로 소나무가 도태되는 천이 촉진 현상을 보일 것으로 예상된다. 굴참나무-소나무군락은 교목층에서는 조림 수종인 굴참나무가 높은 상대우점치를 나타내고 있지만, 아교목층은 자연 이입종인 신갈나무와 산불 이전 우점종인 소나무가 높은 우점치를 나타내는 특징을 보였다. 소나무나 곰솔이 우점하는 군락에 비해 복원 후 자연 이입종인 신갈나무에 의한 우점도가 높아 향후 혼효림으로 발달할 것으로 보이며, 이후 신갈나무와 굴참나무가 우점할 것으로 예측된다. 소나무-신갈나무군락은 조림 수종인 소나무와 자연 이입종인 신갈나무가 경쟁하고 있는 군락이다. 기존 연구에 따르면 산불 지역의 자연 회복지는 초기에 신갈나무와 쇠물푸레나무가 우점하는 경향을 나타낸다고 하였으나, 본 군락은 교목층과 아교목층 모두 소나무가 우점하는 특징을 나타내었다. 이를 통해 산불 이전 식생이었던 소나무군락을 형성할 것으로 판단된다. 이처럼 동해안은 과거 헐벗은 상태로 장기간 노출된 곳으로 유기물층이 없는 곳이 많다. 또한, 이곳에 광물질 토양이 노출된 나지에 소나무 종자가 비산하여 발아되고 숲을 형성하게 되지만 토양 비옥도가 개선되지 못한다면 자연 천이가 아닌 소나무림으로 장기간 지속될 수 있을 것으로 보인다. 곰솔-소나무군락은 곰솔이 교목층과 아교목층 모두 우점하고 있다. 곰솔-소나무군락은 단순림으로 다른 조사지역과 비교할 때 종다양도가 낮은 특징을 나타내며, 경쟁 수종이 없어 곰솔-소나무림의 형태를 유지할 것으로 판단된다. 이는 산불이 수목의 전소된 상태에서 소나무림 하층에 싸리 등 단일종으로 우점되는 경향이 있어 종다양도가 낮으며, 토양면 노출이 심각하다. 특히, 여름철 집중 강우에 따른 표토 유실이 진행되어 매토종자와 같은 자연복원 보다는 인공복원으로 접근하는 것이 효과적이다. 이와 함께 급경사 지역이나 동해안 해안에 가까운 구릉성 지대에는 토양이 척박하기 때문에 향후 복원을 위한 식물종 선정 시 참나무류 보다는 소나무로 접근하는 것이 효과적이다. 본 연구는 산불 피해지역 복원지에 대한 식생 구조 특성을 분석하기 위해 수행되었다. 전체적인 식생 구조 특성을 파악함에 있어 피해지와 참조생태계가 대변될 수 있는 비피해지(대조구) 식생 구조의 비교·분석과 같은 추가적인 연구가 필요할 것으로 판단된다. 이를 통해 산불피해지의 지표화, 전소화 피해지 등 유형별 효과적인 복원사업과 시행착오를 줄이는 중요한 자료로 활용될 수 있을 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.