• Journal of Korean Society of Water and Wastewater
• /
• v.38 no.2
• /
• pp.69-81
• /
• 2024

In this study, an evaluation system that can be used to evaluate the feasibility of developing and supplying hydrothermal energy for the operation of large-scale complex facilities was developed. To this end, this study derived factors to be considered when selecting a location for the use of hydrothermal energy using raw water from multi-purpose dams and regional water supply systems through literature survey and expert interviews. The evaluation indicators derived from this study are divided into four sectors: hydrothermal energy utilization factors, location factors, planning factors, and disaster safety factors, and are composed of 10 mid-level indicators and 34 detailed planning indicators. The relative importance of all factors was derived using the Analytic Hierarchy Process (AHP) technique, and the developed evaluation indicators and relative importance were applied to four multi-purpose dam regions in the country. As a result, it was found that in the development and use of hydrothermal energy utilizing regional raw water supply line the urban planning conditions of the supply site can have a greater impact on the location selection results than the hydrothermal energy development itself. Due to the characteristics of the evaluation indicators developed in this study and their nature as comprehensive indicators, it is believed that the results should be applied to determine the overall adequacy of site selection in the early stages of hydrothermal energy development. In the future, it is believed that it will be necessary to analyze the problems in supplying and operating hydrothermal energy using raw water from multi-purpose dams and regional water resources. Based on the analysis the evaluation system developed in this study is expected to be improved and supplemented.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.4 s.117
• /
• pp.116-128
• /
• 2006

This study focuses on hydrological changes caused by developments in the 13th, 14th (Motjarigol) district in Eun Pyoung New Town, Seoul on the basis of the Land Use Planning of development plan. Through analyses from the hydrological experiments about rainfall outflow using universal equation and amounts of infiltration through soils, the changes in amounts of overflows were estimated and the results were discussed from a urban ecological point of view. As a result, it has been predicted that the amount of rainfall outflow at post-development was dramatically increased, compared to pre-development. Installing of Derbris Dams and infiltration facilities were suggested as alternative plan to meditigate these changes. If we apply these alternatives, the rainfall outflow would be reduced up to 30% compared to the development plan without BMPs (Best Management Practice). In conclusion, it is proposed that once the ecological principles were considered during development planning process, we can minimize the adverse effects of developments to our environments.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1400-1401
• /
• 2011

RPS(Renewable Portfolio Standard) recently with the introduction of a new solar power development as the market expands, land shortage of solar power as an alternative site for installing solar water development has emerged. Solar water dams, reservoirs and water by taking advantage of available solar power development a new concept of private forest land in a way does not involve destruction of the forest land and water resources through efficient use of environmentally friendly energy production and water quality improvement There are a variety of benefits. This paper won the nation's first solar power to enforce the selection of the optimal location for solar power's award for planning theory and research techniques are intended to establish. Award of the solar system through the analysis of a few research-related materials and renewable energy systems project implementation process to establish an initial investigation techniques as well as the existing dam located about fitness will be assessed. In this study, solar water conducting business in the current analysis with considerable planning and installation of solar installation for the economic and environmental cost of the evaluation period and is expected to be able to give you one.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.367-368
• /
• 2008

한의학의 주요 방법 중 하나인 맥진은 한의사가 환자의 손목 부위를 손가락으로 진맥하여 환자의 맥동을 감지하는 행위이다. 하지만 이러한 맥진은 주관적이고 형이학적 이어서 맥진의 발전을 위해서는 맥진의 객관화와 정량화가 요구된다. 본 연구는 기존의 와이어 본딩(wire bonding)을 이용한 맥진 센서의 단점인 내성을 극복하기 위하여 FDB(Face Down Bonding) 방식을 이용하였으며, $3{\times}3$ 멀티 어레이 센서간의 crosstalk를 극복하고자 센서들을 격리시킬 수 있는 댐(dam)을 형성하였다. 또한, 댐을 감싸고 상단 및 하단에 들기를 형성하는 패드를 이용하여 피부에 접촉하도록 제작하였다. 센서의 특성을 평가하기 위하여 각 센서 출력 단자의 저항 값을 측정하였으며 센서 스펙에서 제공하는 값과 동일함을 확인하였고, 실제 요골동맥 부위에서 맥파를 측정하여 전형적인 요골동맥 맥과 파형이 측정됨을 확인하였다.

• Journal of the Speleological Society of Korea
• /
• no.89
• /
• pp.46-58
• /
• 2008

동굴 퇴적물의 형성과정은 1단계 기권 (Atmosphere): 빗방울 (H2O) 이 대기중에서 CO2의 혼합으로 산성비 (H2CO2)가 되어 석회암 (CaCO3)에 떨어져서 최초의 용식작용이 시작된다. 2단계 토양권 (Pedosphere): 산성비와 석회암성분이 합쳐 형성된 가용성 화합물 (Ca(HCO3)2)은 식생부식(植生腐植)에 의한 토양 (Humic acidic soils) 에 의해 기반암의 용식이 촉진 되어 지표에는 Karren과 석문 (석문(石門) Natural Bridge), 와지 (Dolines, Sinkholes) 지형을 형성시키고, 암석의 분순물은 지표에 남겨져서 결국 적색풍화토 (Residuum, Risidual Redish Soils) 를 만든다. 3단계 암권 (Lithosphere): 용식작용에 의해 지상에서 지하 로 확대되어진 모암의 균열을 타고, 지하의 공간이 지하수의 유입과 유출에 의해 점차 확대되어 동공형의 Conduites; Voids; Shaft 이라는 특수지형을 형성시키고,동굴의 천정으로부터 나온 Ca(HCO3)2 는 탄산염의 지속적인 분해 공급에 의해 동굴내에는 종류석, 석순, 유착석 (Speleothem)등의 새로운 동굴지형 (Speleoscape)을 조성하게 된다. 4단계 수권 (Hydrosphere): 동굴의 형성작용을 거친 물은 동굴지하수로 잔여 Calcite를 함유한 채로 유출 (Spring) 된다. 동굴을 떠난 잔여 Calcite는 또다시 하천유역에 침전시켜서 석회화 단구형의 집적지형 (Tufa Formation: Tufa Dam, Tufa Flowstone)을 최종적으로 동굴을 나와 외벽 이나 하천의 바닦에 형성하는 과정을 거치면서 카르스트 지형의 발달과정이 1차적인 순환을 마치게 된다.

• Journal of Information Display
• /
• v.11 no.3
• /
• pp.109-112
• /
• 2010

The solid phase compositions and dielectric properties of silicon nitride ($SiN_x$) films prepared using the plasma enhanced chemical vapor deposition (PECVD) technique at a low temperature ($200^{\circ}C$) were studied. Controlling the source gas mixing ratio, R = $[N_2]/[SiH_4]$, and the plasma power successfully produced both silicon-rich and nitrogen-rich compositions in the final films. The composition parameter, X, varied from 0.83 to 1.62. Depending on the film composition, the dielectric properties of the $SiN_x$ films also varied substantially. Silicon-rich silicon nitride (SRSN) films were obtained at a low plasma power and a low R. The photoluminescence (PL) spectra of these films revealed the existence of nano-sized silicon particles even in the absence of a post-annealing process. Nitrogen-rich silicon nitride (NRSN) films were obtained at a high plasma power and a high R. These films showed a fairly high dielectric constant ($\kappa$ = 7.1) and a suppressed hysteresis window in their capacitance-voltage (C-V) characteristics.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.29-36
• /
• 2011

The main purpose of this paper is to make a map showing canopy cover by using airborne Lidar data based on region. Watershed algorithm was applied to elevation data to conduct segmentation, and then canopy cover was estimated through the regions extracted. In the process of transforming point data to raster, we solved the problems about overestimation and underestimation by using frequency method. Also, canopy cover map could be produced with various scales by differing level of segmentation and it provides more accurate and precise information than ones of ordinary public forest map.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.457-465
• /
• 2014

Size-controlled lead sulfide (PbS) quantum dots were synthesized by the typical hot injection method using oleic acid (OA) as the stabilizing agent. Subsequently, the ligand exchange reaction between OA and thioacetic acid (TAA) was employed to obtain TAA-capped PbS quantum dots (PbS-TAA QDs). The condensation reaction of the TAA ligands on the surfaces of the QDs enhanced the conductivity of the PbS-TAA QDs thin films by about 2-4 orders of magnitude, as compared with that of the PbS-OA QDs thin films. The electron transport mechanism of the PbS-TAA QDs thin films was investigated by current-voltage (I-V) measurements at different temperatures in the range of 293 K-473 K. We found that the charge transport was due to sequential tunneling of charge carriers via the QDs, resulting in the thermally activated hopping process of Arrhenius behavior.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.559-565
• /
• 2005

As the wave impinges on and overtops the structure, a large highly aerated region is created in front of the structure and water splashs on top of the structure. The broken wave in front of the structure and associated green water on top of the structure are highly aerated containing not only a large number of bubbles but also very large sizes of bubbles. In this paper, the velocity field of the highly aerated region and the splashing water on the top is measured using a modified PIV method incorporating the traditional PIV method with the shadowgraphy technigue by correlating the ' texture ' of the bubble images. The velocity fields of a plunging wave impacting on a structure in a two-dimensional wave flume is measured. It is found that the maximum fluid particle velocity in flout of the structure during the impinging process is about 1.5 times the phase speed of the wave, while the maximum horizontal velocity above the top is less than the phase speed, It is also found that the dam breaking solution does not work well in predicting the green water velocity.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.497-505
• /
• 2011

Image fusion is a technical method to integrate the spatial details of the high-resolution panchromatic (HRP) image and the spectral information of low-resolution multispectral (LRM) images to produce high-resolution multispectral images. The most important point in image fusion is enhancing the spatial details of the HRP image and simultaneously maintaining the spectral information of the LRM images. This implies that the physical characteristics of a satellite sensor should be considered in the fusion process. Also, to fuse massive satellite images, the fusion method should have low computation costs. In this paper, we propose a fast and efficient satellite image fusion method. The proposed method uses the spectral response functions of a satellite sensor; thus, it rationally reflects the physical characteristics of the satellite sensor to the fused image. As a result, the proposed method provides high-quality fused images in terms of spectral and spatial evaluations. The experimental results of IKONOS images indicate that the proposed method outperforms the intensity-hue-saturation and wavelet-based methods.