• 대한토목학회논문집
• /
• 제33권6호
• /
• pp.2519-2528
• /
• 2013

표준품셈은 공공기관 및 민간기관의 공사비를 책정하는 기본적인 자료로 이용되고 있다. 본 논문은 하천공사에서 선정된 대표공종을 대상으로 새로운 형식의 표준품셈 및 장비의 작업량 산출방식을 제안하고자 한다. 품셈에서 작업조 구성의 정보 및 1일 생산성 정보의 제공이 가능하도록 함으로써 공정계획 단계에서 품셈의 적용성을 향상시키고 장비의 작업량 산출과정을 간소화하여 사용자의 편의성을 증대할 수 있기를 기대한다. 하천공사의 경우 작업조건이라는 변수가 매우 크게 작용하기 때문에 생산성 정보 및 기계의 작업량을 일반화 하는 것은 많은 어려움이 존재하지만 지속적인 생산성 정보와 기계의 작업량 정보를 개선하여 정확도를 향상할 수 있다면 품셈을 통한 공정계획 수립 및 적산과정의 간소화가 가능할 것이다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.375-378
• /
• 2002

현장에서 수행되는 대부분의 공사는 다수의 공종과 다양한 협력업체가 공사를 진행해 나간다. 그러므로 투입노무자 및 자원의 관리 상 변수의 발생이 많아 공사정보관리에 어려운 점이 많다. 이러한 현장공사의 효율적인 관리를 위해서 다양한 공사정보 관리 시스템 들이 제시되고 있으나, 시공업체 중심의 시스템 관리와 협력 업체의 참여도 및 이해도 부족과 영세로 인한 적용 어려움이 문제점으로 나타나고 있다. 또한 현장공사관리에 기초자료로 제공되는 작업일보의 정보들을 수집/분석/관리하는데 상당한 시간과 인력이 소모되고, 이동시 정보손실, 수 작업에 의한 정보의 왜곡 및 신뢰성 저하 등등 다양한 문제점이 나타나고 있다. 따라서, 본 연구에서는 기존 협력업체가 작성하는 작업일보의 기능 및 문제점을 분석하고, 작업일보내의 생산성 정보의 흐름 및 생산성 향상 요인을 분석하여, 작업일보의 작성프로세스를 개선하는 것을 목적으로 하고 있다. 더 나아가, 협력업체 중심의 정보입력 및 관리를 통한 공사의 생산성을 향상시킬 수 있는 개선된 작업일보 시스템의 방향을 제시하고자 한다.

• Journal of Preventive Medicine and Public Health
• /
• 제20권1호
• /
• pp.56-66
• /
• 1987

Information on productivity of hospital personnel is required for optimum staffing and hospital management. This study deals with the quantitative aspects of workload of medical personnel in training hospitals by their specific characteristics. Specifically this study attempted to find relevant determinants of the productivity of medical personnel using multiple stepwise regression analysis based on data obtained from 135 training hospitals. The findings of this study were as follows: 1) Daily average number of outpatients and inpatients treated by a physician were 20.4 and 10.2, respectively. 2) Daily average number of patients cared by a nurse was 8.2. Daily average number of tests performed by pathologic technician and radiologic technician were 83.2 and 21.5, respectively. 3) Productivity of medical personnel were significantly different for the three groups of factors: hospital sire (number of beds, number of medical personnel per 100 beds): institutional characteristics (medical school affiliation, training type, profit status); and environmental factors (location, number of physician and beds per 1,000 population in the region). 4) The factors a(footing the productivity varied according to the types of medical profession: the number if beds, the number of physicians per 100 beds, training type, and profit status for physicians; the number of nurses per 100 beds, the number of beds, medical school affiliation for nurses; the number of physicians per 100 beds, the number of technicians per 100 beds, and ownership for pathologic technicians; the number o( technicians, training type, and the number of physicians per 100 beds for radiologic technician.

• Architectural research
• /
• 제20권4호
• /
• pp.147-152
• /
• 2018

As construction projects become larger, process plans become more complex, and inadequate process management leads to waste of time and resources. Effective process management requires process management techniques that can identify problems inherent in the process, continuously improve, and reflect interdependent process characteristics. In the field, the day's details by work type and work status are to be entered in the work daily report. However, even when important information is written, it is not directly linked to the overall process management. This study aims to propose specific process management and decision-making plan based on actual worker by visualizing and quantifying the information described in the existing work daily report. It is expected efficient process management to increase reliability and productivity through process management, which can increase the utilization of work daily reports and facilitates organic communication among participants.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.107-114
• /
• 1999

The large-scale distribution of crops Is usually determined by climate. We present the results of a climate-crop prediction based on spatial bio-physical process model approach, implemented in a GIS (Geographic Information System) environment using several regional and global agriculture-environmental databases. The model utilizes daily climate data like temperature, rainfall, solar radiation being generated stocastically by in-built model weather generator to determine the daily biomass and finally the crop yield. Crops are characterized by their specific growing period requirements, photosynthesis, respiration properties and harvesting index properties. Temperature and radiation during the growing period controls the development of each crop. The model simulates geographic/spatial distribution of climate by which a crop-growing belt can also be determined. The model takes both irrigated and non-irrigated area crop productivity into account and the potential increase in productivity by the technical means like mechanization is not considered. All the management input given at the base year 1995 was kept same for the next twenty-year changes until 2015. The simulated distributions of crops under current climatic conditions coincide largely with the current agricultural or specific crop growing regions. Simulation with assumed weather generated derived climate change scenario illustrate changes in the agricultural potential. There are large regional differences in the response across the country. The north-south and east-west regions responded differently with projected climate changes with increased and decreased productivity depending upon the crops and scenarios separately. When water was limiting or facilitating as non-irrigated and irrigated area crop-production effects of temperature rise and higher $CO_2$ levels were different depending on the crops and accordingly their production. Rise in temperature led to yield reduction in case of maize and rice whereas a gain was observed for wheat crop, doubled $CO_2$ concentration enhanced yield for all crops and their several combinations behaved differently with increase or decrease in yields. Finally, with this spatial modeling approach we succeeded in quantifying the crop productivity which may bring regional disparities under the different climatic scenarios where one region may become better off and the other may go worse off.

• 한국건설관리학회논문집
• /
• 제12권5호
• /
• pp.23-34
• /
• 2011

건설현장에서 정확한 진도를 관리하기 위해서는 비용정보와 일정정보를 결합한 통합정보가 요구되며 프로젝트의 성과측정을 위한 기초자료가 된다. 그러나 국내 건설공사는 비용과 일정정보를 각각 관리함으로써 객관적인 성과측정이 어려우며 내역서상의 물량을 액티비티에 분개하는 작업을 통해 생산성을 감소시킨다. 한편, BIM을 활용한 연구가 진행되면서 BIM을 통해 보다 효율적으로 진도관리하는 연구가 필요한 실정이며 현장에서는 일일 작업관리에 대한 필요성이 요구되고 있다. 이러한 건설 산업의 흐름에 따라 본 논문에서는 BIM 모델의 위치정보와 BIM기반의 견적데이터를 활용하여 3가지 타입의 진도관리단위를 생성하고 이를 통해 일일 진도율 및 일일 기성액을 파악하는 정보모텔을 제시하고자 한다.

• International Journal of Advanced Culture Technology
• /
• 제9권1호
• /
• pp.177-182
• /
• 2021

The fourth industrial revolution based on information and communication technology (ICT) becomes the center of society, and the overall industrial structure is also changing significantly. ICT refers to the hardware of information devices and the software technologies required for the operation and information management of these devices, and any means of collecting, producing, processing, preserving, communicating and utilizing them. ICT is integrated into industries and services or combined with new technologies in various fields such as robotics and nanotechnology to connect all products and services to the network. The development of ICT, which continuously creates new products and services, has spread to all sectors of the industry, affecting not only daily life but also the livestock sector recently. In agriculture, ICT technology can reduce production costs by efficiently managing labor and energy because it can improve quality and yield based on data on environmental and growth information such as temperature, humidity, light and soil. In particular, smart livestock is considered suitable for achieving livestock management goals because it can reduce labor force and improve productivity by remotely and automatically managing accurate information necessary for raising and breeding livestock with ICT devices. The purpose of this study is to propose the need for ICT technology by comparing farm productivity before and after ICT is introduced. The method of the study is to compare the productivity before and after the introduction of ICT in Korean beef farms, pig farms, and poultry farms. The effectiveness of the study proved the excellence of ICT technology through the production results before ICT introduction and the productivity improvement case of livestock farms that efficiently operated manpower management and reduced labor force after ICT introduction. The conclusion of this paper is to present the need for smart livestock through ICT adoption through case study results.

• 한국해양공학회지
• /
• 제31권2호
• /
• pp.141-154
• /
• 2017

A production management system is developed to enhance both the information and productivity of ship and offshore plant deckhouse floor outfitting. The functions of the production management system for the deckhouse floor outfitting were reviewed based on a literature survey of several production management systems with respect to the ship building and architecture fields. This study investigated numerous daily production reports and their application to actual work places to utilize the system development. The developed scanned drawing-based production management (SDPM) system minimizes any loss and/or distortion of work information between the workshop and management office when applying a scanned production drawing to the daily report. The SDPM system increases the data objectivity, as well as intuitiveness of the information generation by adopting an efficient user interface, which makes it possible to perform image annotations on the scanned drawing for the daily production report while simultaneously interacting with the production management database. Applying the system operation to actual deckhouse floor covering work verified that it was feasible to use the SDPM system for production management in the ship outfitting work process.

• 한국건설관리학회논문집
• /
• 제4권2호
• /
• pp.66-73
• /
• 2003

최근 수행되는 건설프로젝트가 대형화$\cdot$복잡화되면서 많은 공종에서 다양한 협력업체가 투입되게 되며, 기존의 관리 방식으로는 급격히 늘어나는 자원 및 작업의 정보를 관리하는데 한계점이 드러나고 있다. 이러한 현장공사의 효율적인 관리를 위해서 다양한 공사정보 관리 시스템들이 제시되고 있으나, 시공업체 중심의 시스템 관리와 협력 업체의 참여도 및 이해도 부족과 협력업체의 재무, 기술, 관리 측면에서의 영세성으로 인해서 효율적인 적용이 어려운 것으로 나타나고 있다. 또한 현장공사관리에 기초 자료로 제공되는 작업일보의 정보들을 수집/분석/관리하는데 상당한 시간과 인력이 소모되고, 정보의 사용주체와 사업수행단계가 바뀜에 따라 정보가 손실되며, 정보매체 및 입력방법과 입력주체가 바뀜에 따라 정보가 왜곡되고 누락되는 등 다양한 문제점이 나타나고 있다. 따라서 본 연구에서는 현장에서 작성되는 작업일보에서 인력/작업 정보 수집의 현황을 파악하여 작업일보의 기능 및 문제점을 분석하고, 작업일보의 업무 및 정보흐름을 분석하여 개선방향을 제시하는 것을 목적으로 하고 있다. 더 나아가, 작업일보의 작성프로세스를 개선하고, 협력업체 중심의 정보입력 및 관리를 통한 공사의 생산성을 향상시킬 수 있는 작업일보의 개선방향을 제시하고자 한다.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 2003년도 춘계학술대회
• /
• pp.45-54
• /
• 2003

Over the past decade, the unprecedented internet revolution has dramatically altered many core aspects of out daily business and personal lives. Many of these fundamental changes have completely transformed traditional communication mechanism, boosted productivity, opened up new marketing opportunities, and given birth to entirely new applications in the world of eCommerce and eBusiness. But Many web applications doesn't connect with real-world device such as lights, pumps, and Motors avaiable over the Internet. In this paper We introduce XML and presents way it can be used with I/O system.