• Environmental Analysis Health and Toxicology
• /
• v.16 no.2
• /
• pp.103-114
• /
• 2001

Worldwide trend of waste treatment technology is rapidly transferring from "incineration system" to "gasification & melting system" which can derive the resources from waste and charge no more environmental burden to nature. And therefore it is necessary for our country to adopt gasification & melting system urgently to present the land pollution and lack of landfill area. Among several gasification and melting processes Daewoo-Thermoselect gasification and melting system is the representative process which can transfer waste to resources such as sin-gas, molten slag, metal hydroxide, mixed salt and sulfur through the process of compaction, degasification, gasification and melting.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.164-169
• /
• 1992

Classical methods for estimating transfer function models have not always been successful. A statistic approach to the identification of transfer function models which is corrupted by disturbances or noise is presented. The estimated impulse response is obtained from the autocorrelation function and cross correlation function between the measured input and output. Several data analysis tools such as R- , S- and GPAC array for the estimated impulse response give us pretty clear information on the order of transfer function models.

• Economic and Environmental Geology
• /
• v.43 no.5
• /
• pp.517-521
• /
• 2010

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.951-954
• /
• 2010

There are lots of soft ground improvement methods which is consist of different materials. In the analysis and design, composite ground method is usually regarded. Composite ground method considers the area replacement ratio as a key parameter to combine the physical and mechanical characteristics of tow different material. In this study, using composite material consist of three different materials which have different diameters, series of specific gravity test were performed according to KS F 2308, to investigate the applicability of composite ground method. As a result, it is found that composite material which is consist of fine grained soil and granular soil has a high applicability of composite ground method. This result means that, in estimating of ground properties of composite material which is consist of similar fine grained material such as cement mixing etc., composite ground method has a less applicability.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.796-797
• /
• 2011

하이브리드 자동차의 Integrated Starter & Generator (ISG)는 기동 시 높은 토크를 발생시키면서 진동과 소음을 동반한다. 이러한 진동 및 소음은 차량의 품질 확보를 위하여 최소화 시켜야 할 필요가 있다. 본 논문에서는 매입형 영구자석 동기 전동기로 설계된 ISG의 진동 및 소음 저감에 관한 연구에 대하여 다룬다. ISG의 진동 및 소음 저감을 위하여 회전자 코어의 형상 최적설계, 슬롯 수 변경설계 그리고 회전자의 step skew를 적용시켜 각각의 설계방법이 ISG의 진동 및 소음에 미치는 영향을 해석과 실험을 통해 검증하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.2371-2374
• /
• 2002

많은 기업들은 협업 시스템을 사용하여 제품을 보다 효율적으로 개발하기 위해서 조직과 조직 또는 기업과 기업간의 동시성 협업을 실시간으로 지원하는 시스템에 대한 연구와 개발이 진행되고 있다. 협업설계 시스템은 가상 협동 공간에서의 공동작업을 통해 지역적으로 떨어져 있는 개발자들이 직접 만나지 않고 CAD, VR, Web, 오피스문서와 같은 기업내의 다양한 데이터를 손쉽게 공유할 수 있는 시스템으로 제품의 다양화 및 신속한 출시를 가능케 한다. 본 논문에서는 실시간 협업설계 시스템 개발에 필요한 요소기술과 주요 구성원을 먼저 소개하고 CPC (Collaborative Product Commerce) 환경을 지원하는 방안과 시스템 구축사례를 소개한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.791-800
• /
• 2010

This paper presents the construction status and the conceptual designs of midium and high level radioactive waste disposal facilities from all around world. For the midium radioactive waste, a shallow disposal using trench or a deep depth disposal are adopted. However, these are rather focusing on the social and cultural point of view than the technical. Meanwhile, the high level radioactive waste is basically disposed in the deep underground. The corresponding ground conditions are usually dense and composed of sedimentary and crystalline rocks mainly with low permeability. A barrier system is made of canister which consists of copper, titanium, and tin. The inner and outer side of the canister are composed of different materials respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1405-1409
• /
• 1990

Generally, the required control functions for the industrial auto trimming sewing machines are the sewing speed control with pedal input, the up/down stopping-position control of the needle, the automatic sewing according to the memorized sewing pattern including the number of stitches, and etc. We developed a new type of AC servo motor controller, which suffices for all the above functions. The developped controller is working well, and the performances are very good for the practical use.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1420-1423
• /
• 1990

DC series motor has been widely applicated in industry due to many advantageous characteristics, such as high starting torque, easy construction of its controller, and cost economy, etc.. However, by high starting current, excessive surge voltage, and so on, many problems which could make engineers relinguish to use it are induced. In this paper, various protection methods for power circuit are discussed. Particularly, a new proposed snubber circuit which consists of two diodes, one capacitor, and a resistor increases the performance with respect to the suppression of the surge voltage. Furthermore, the plugging algorithm, by checking the armature current and voltage and controlling the field coil current, is designed and implemented. Also, these methods and algorithms were applicated in electric vehicle, and we could find its stability to be considerably improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.281-285
• /
• 1990

Our N.C. sewing machine is a device that acts sewing automatically in reference to N.C. data made by data input device. Our N.C. sewing mechine is composed of induction motor that has electric clutch and brake, step motor that drives x-y table. Sewing area of our machine is 170 mm * 100 mm, maximum sewing speed is about 2000 spm, maximum stitch length 6.2 mm. In actual sewing, synchronization between motion of needle up-down and motion of x-y table is a critical factor. In this paper, technology about synchronization will be profoundly discussed.