• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.62-66
• /
• 2013

This study was performed to investigate the physicochemical characteristics of glycoprotein extracted from carrot. We manufactured glycoprotein using natural vegetable raw materials carrots, and then analyzed it's physicochemical properties. The results showed that the nutritional composition of carrot glycoprotein (CG) consisted of 2.35% carbohydrate and 94.2% glycoprotein. There were small amounts of hydroxyproline and glycine known as characteristics of collagen peptide in the amino acid of CG, but there were large amount of glutamic acid and aspartic acid involved in the metabolism of glucose and fat. The calories of CG was 342.1 kcal/100 g and the molecular weight appeared less than 594 Da average molecular weight distribution.

• Journal of fish pathology
• /
• v.35 no.2
• /
• pp.241-246
• /
• 2022

White spot syndrome virus (WSSV) is a prevalent and virulent pathogen affecting cultured whiteleg shrimp (Litopenaeus vannamei) in Korea. In this study, seven monoclonal antibodies (mAbs) (10A12, 16C3, 17G4, 21G5, 22C4, 23B6 and 24G6) were produced by using purified WSSV. The reactivity of these mAbs was analysed by Western blot (WB), indirect immunofluorescence (IIF), and lateral flow immunochromatographic assay (LFIA). WB analysis demonstrated that three mAbs (17G4, 22C4, and 23B6) reacted specifically to VP28 with an approximate molecular weight of 24 kDa, mAb 16C3 reacted with approximately 17 kDa. IIF analysis demonstrated specific fluorescence signals on gill tissues of WSSV-infected shrimp, with five mAbs (10A12, 16C3, 22C4, 23B6, and 24G6), pleopods from WSSV-infected shrimp were used for LFIA, where, two mAbs (21G5 and 22C4) exhibited positive reaction. In conclusion, it can be inferred that the mAbs usage and specificity depends on the nature of assay used for diagnosis.

• Archives of Plastic Surgery
• /
• v.49 no.3
• /
• pp.373-377
• /
• 2022

Currently, robot-assisted latissimus dorsi muscle flap (RLDF) surgery is used in treating patients with Poland syndrome and for breast reconstruction. However, conventional RLDF surgery has several inherent issues. We resolved the existing problems of the conventional system by introducing the da Vinci single-port system in patients with Poland syndrome. Overall, three patients underwent RLDF surgery using the da Vinci single-port system with gas insufflation. In the female patient, after performing RLDF with silicone implant, augmentation mammoplasty was also performed on the contralateral side. Both surgeries were performed as single-port robotic-assisted surgery through the transaxillary approach. The mean operating time was 449 (335-480) minutes; 8.67 (4-14) minutes were required for docking and 59 (52-67) minutes for robotic dissection and LD harvesting. No patients had perioperative complication and postoperative problems related to gas inflation. The single-port robot-assisted surgical system overcomes the drawbacks of previous robotic surgery in patients with Poland syndrome, significantly shortens the procedure time of robotic surgery, has superior cosmetic outcomes in a surgical scar, and improves the operator's convenience. Furthermore, concurrent application to another surgery demonstrates the possibility in the broad application of the robotic single-port surgical system.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.193-196
• /
• 2001

IL-18. formerly known as IGIF(interferon -gamma inducing factor), is structurally IL-l related but functionally IL-12 related pro-inflammatory cytokine. The human IL -18(hIL-lS), like IL-$1{\beta}$, is synthesized as a biologically inactive precursor of 24kDa lacking a signal peptide, and then cleaved into an active mature form by cystein protease IL-$1{\beta}$ converting enzyme (ICE: caspase- 1), We tested if the mature hIL -18 can be expressed and secreted into culture medium by transforming the forming gene construct consisting of a mature hIL-18 gene fused to signal peptide of rice amylase lA. Secondly, we were tested if the pro- IL-18 could be processed into a biologically active form by caspase-l like protease in plant. Cell suspension culture was established from the leaf-derived calli of transgenic tobacco plant. Southern and Northern blot analysis indicated the expression of both pro-hIL-18 and mature hIL-18 plant cells. Western blot analysis introduced the protein products of pro- hIL -18 and mhIL -18 were observed in transigenic cell lines. In addition, the molecular size of recombinant pro-hILl-18 and mhIL-18 were estimated to be 24kDa and 18kDa, respectively. ELISA revealed that the amount of pro- hIL -18 was 1.3ug per gram of fresh weight calli. Moreover, the presence of mhIL-18 was detected in the culture medium and it appeared to be 25ug/L.

• Publications of The Korean Astronomical Society
• /
• v.27 no.1
• /
• pp.1-16
• /
• 2012

In this paper, we describe the installation of VLBI Correlation Subsystem (VCS) main product and its performance at the Korea-Japan Correlation Center (KJCC). The VCS main product was installed at KJCC in August 2009. For the overall performance evaluation of VCS, playbacks, Raw VLBI Data Buffer (RVDB) system, and Data Archive (DA) system were installed together. The VCS main product was connected between RVDB and DA, and the correlation results were put into the DA to confirm the normal operation of VCS 16 station mode configuration. The evaluation test was first performed with 4 station mode, same as the factory test of VCS main product. Based on the results of 4 station mode, the same evaluation test was conducted for 16 station mode of VCS. We found that the correlation results of VCS were almost similarly compared to those of the Mitaka FX Correlator. Through the test results, we confirmed that the problems such as spectrum errors, delay parameter processing module and field programmable gate array errors in antenna unit, which were generated at the factory test of VCS main product, were clearly solved. And we verified the performance and connectivity of VCS by obtaining the expected correlation results and we also confirmed that the performance of VCS was sufficient for real VLBI observation data in both 4 and 16 station modes.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.4
• /
• pp.613-618
• /
• 2006

Two endoxylanases from an alkaliphilic bacterium, Bacillus halodurans C-1, were purified 3.8- and 7.9- fold with specific activities of 9.4 and 19.8U/mg protein, respectively. The molecular masses of both purified enzymes were 23 and 47 kDa, respectively, and 23 kDa xylanase I (Xyl I) exhibited an optimum pH at 7.0, whereas 47 kDa xylanase II (Xyl II) showed a broad pH range of 5.0 to 9.0. The temperature optima of both xylanases were $60^{\circ}C\;and\;70^{\circ}C$, respectively. Both were stable in the pH range of 6.0 to 9.0 and 5.0 to 10.0, respectively, and they were stable up to $60^{\circ}C\;and\;70^{\circ}C$, respectively. The $K_m\;and\;V_{max}$ of Xyl I were 4.33mg/ml and $63.5{\mu}mol/min/mg$, respectively, whereas Xyl II had a $K_m$ value of 0.30 mg/ml and $V_{max}$ of $210{\mu}mol/min/mg$. Both xylanases hydrolyzed xylans from birchwood, oat spelt, and larchwood. However, they showed different modes of action; a series of xylooligosaccharides larger than xylotriose were released as the major products by Xyl I, whereas xylobiose and xylotriose were the main products by Xyl II. The maximum synergistic action of the two enzymes on hydrolysis of xylan was 2.16 with the ratio of Xyl I to Xyl II at 1:9.

• Journal of architectural history
• /
• v.22 no.6
• /
• pp.35-46
• /
• 2013

This study aims to examine the early use of Da-bo tap and their transformation by analyzing the various meanings of the term pagoda in Chinese translations, the Sanskrit version of the Lotus Sutra, as well as Dabotap in the Mogao Caves of Dunhuang. In addition, we aim to highlight changes in Dabotap usage, which started out as residential spaces, but transformed into burial spaces over time. The details can be summarized as follows. First, early Buddhist monuments were usually either pagodas serving as burial places for the dead or shrines that were not. A Dabotap is a type of pagoda enshrining the body of Prabhutaratna, and was initially used as a residential space, rather than a burial place for the dead. Second, the terms stupa and caitya are clearly distinguished from each other in the Sanskrit scriptures, and stupa is also further classified into dhatu, sarisa, and atmabhava based on the object being enshrined. In Gyeon-bo-tab-pum, the preconditions for caitya to transform into stupa is presented by explaining that worshipping the space enshrining the body of Prabhutaratna is worthy of the same status as the space enshrining sarira. Third, the Mogao Caves of Dunhuang had been depicted from the Western Wei of the Northern Dynasties until the time of the Yuan Dynasty. It was used as a residential space until the early Sui Dynasty, but was used as both residence and burial places until the Tang Dynasty when pagodas were first being constructed with wheel or circles forms on top, which then gradually changed into stupa (grave towers).

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.14-21
• /
• 2000

DEAE-Toyopearl 650S, Superdex pg-75, Poros HQ, Superdex H200의 각종 칼러크로마토그래피를 이용하여 C.bifermentans DPH-1균주로부터 테트라클로로에틸렌(PCE) 분해 효소를 정제했다. 이 PCE 분해효소 (PCE dehalogenase)는 PCE를 환원적 탈염소화 반응에 의해 시스디클로로에딜렌 (cis-1,2-dichloroethylene)에 전환 가능하여, 이 때의 Vmax 및 Km 치는 각각 73 nmol/h.mg protein, 12$\mu$M이었다. 본 PCE dehalogenase의 겔여과 분자량 Maker Kit를 이용한 분석결과(70kDa)는 SDS-PAGE에 나타난 분자량(35kDa)의 약 2배인 것으로 확인되었다. 따라서 본 효소는 분자량 70kDa의 이량체(Homo dimer)인 것으로 추정되었다. 본 효소의 최적온도 및 pH는 각각 35$^{\circ}C$ 및 8.0 이었다. 또한 본 효소는 PCE외의 트리클로로에틸렌, 디클로로에틸렌 이성체, 1,2-디클로로에템, 1,2-디클로로프로판, 1,1,2-트리클로로에탄에 대하여도 활성을 타나내었다. N-말단 아미노산 분석결과에서도 본 효소는 현재 알려진 PCE dehalogenase와 그 배열이 전혀 다른 것으로 나타나 각종 유기염소 화합물의 분해능을 보유한 신종의 PCE 분해효소인 것이 확인되었다.

• The Korean Journal of Physiology and Pharmacology
• /
• v.10 no.6
• /
• pp.309-315
• /
• 2006

The protective effects of baicalein, one of the flavonoids in Scutellaria baicalensis Georgi, were evaluated against 6-hydroxydopamine (6-OHDA)-induced neuronal damage in mice and cultured human neuroblastoma cells. Nigrostriatal damage was induced by stereotaxically injecting 6-OHDA into the right striatum. Baicalein was administered intraperitoneally 30 min before and 90 min after lesion induction. Animals received a further daily injection of baicalein for 3 consecutive days. Two weeks after 6-OHDA injection, contralateral rotational asymmetry was observed by apomorphine challenge in lesioned mice. Tyrosine hydroxylase (TH) immunohistochemistry revealed a significant loss of terminals in lesioned striatum and the reduction of the numbers of TH-positive cell in the ipsilateral substantia nigra (SN). In addition, the levels of dopamine (DA) and DA metabolites were reduced and lipid peroxidation was increased in lesioned striatum. However, baicalein treatment reduced apomorphine-induced rotational behavior in 6-OHDA-lesioned mice, and increased TH immunoreactivity in the striatum and SN, and DA levels in lesioned striatum. Lipid peroxidation induced by 6-OHDA was also inhibited by baicalein treatment. Furthermore, when SH-SY5Y human neuroblastoma cells were treated with baicalein, 6-OHDA-induced cytotoxicity and reactive oxygen species (ROS) production were significantly reduced. These results indicate that baicalein effectively protects 6-OHDA-induced neuronal damage through antioxidant action.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.17-40
• /
• 2000

Resin cements are used for cementing indirect esthetic restorations such as resin or porcelain inlays. Because of its limitations in curing of purely light cured resin cements due to attenuation of the curing light by intervening materials, dual cured resin cements are recommended for cementing restorations. The physical properties of resin cements are greatly influenced by the extent to which a resin cures and the degree of cure is an important factor in the success of the inlay. The purpose of this study was to evaluate the influence of porcelain thickness and exposure time on the polymerization of resin cements by measuring the microhardness and the degree of conversion, to investigate the nature of the correlation between two methods mentioned above, and to determine the exposure time needed to harden resin cements through various thickness of porcelain. The degree of resin cure was evaluated by the measurements of microhardness [Vickers Hardness Number(VHN)] and degree of conversion(DC), as determined by Fourier Transform Infrared Spectroscopy(FTIR) on one light cured composite resin [Z-100(Z)] and three dual cured resin cements [Duo cement(D), 3M Resin cement(R), and Dual cement(DA)] which were cured under porcelain discs thickness of 0mm, 1mm, 2mm, 3mm with light exposure time of 40sec, 80sec, 120sec, and regression analysis was performed to determine the correlation between VHN and DC. In addition, to determine the exposure time needed to harden resin cements under various thickness of porcelain discs, the changes of the intensity of light attenuated by 1mm, 2mm, and 3mm thickness of porcelain discs were measured using the curing radiometer. The results were obtained as follows ; 1. The values of microhardness and the degree of conversion of resin cements without intervening porcelain discs were 31~109VHN and 51~63%, respectively. In the microhardness Z was the highest, followed by R, D, DA. In the degree of conversion, D and DA was significantly greater than Z and R(p<0.05). 2. The microhardness and the degree of conversion of the resin cements decreased with increasing thickness of porcelain discs, and increased with increasing exposure time, D and R showed great variation with inlay thickness and exposure time, whereas, DA showed a little variation. 3. The intensity of light through 1mm, 2mm, and 3mm porcelain inlays decreased by 0.43, 0.25, and 0.14 times compared to direct illumination, and the respective needed exposure times are 53 sec, 70 sec, and 93 sec. In D and R, 40 sec of light irradiation through 2mm porcelain disc and 80 sec of light irradiation through 3mm porcelain disc were not enough to complete curing. 4. The microhardness and the degree of conversion of the resin cements showed a positive correlationship(R=0.791~0.965) in the order of R, D, Z, DA. As the thickness of porcelain discs increased, the decreasing pattern of microhardness was different from that of the degree of conversion, however.