• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3923-3930
• /
• 2014

In this study, the physical and dynamic characteristics of soil were analyzed by selecting 3 sections as research subjects among road and structure construction sections in the construction site of the Gwangyang ${\bigcirc}{\bigcirc}$ industry area, and conducted consolidation analysis and bearing capacity assessments through Midas-GTS according to the construction conditions of the structures and section conditions of reinforcement using stabilized soil. The effects of improving the settlement and bearing capacity according to the improved effects of the stability and sections of reinforcement using stabilized soil in applying the reinforcement method using stabilized soil were analyzed as a solution for improving the settlement and bearing capacity of soft clay for constructing roads and structures. The improvement effects of the settlement and bearing capacity were outstanding when the reinforcement method using stabilized soil to the soft clay was applied. After applying the reinforcement method using stabilized soil, the holdback effect of the consolidation settlement was excellent by decreasing the volume of the consolidation settlement from a minimum of 53% to a maximum of 82%. When the width of the reinforcement using stabilized soil was twice the width of the constructed structure, it was found that the holdback effect of the consolidation settlement ranged from 1% to 7% through the width of reinforcement using stabilized soil. In addition, when applying reinforcement more than 6m in width and 1m in depth using stabilized soil, it was found that the increase in the allowable bearing capacity was 2.3 to 3.3 times more than that before applying the reinforcement, which suggests that the increase in bearing capacity by applying the reinforcement method using stabilized soil was significant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.18-25
• /
• 2020

With the development of water internet technology, data communication between objects is expanding. Research related to data communication technology between vehicles that incorporates related technologies into vehicles has been actively conducted. For data communication between mobile terminals, data stability, reliability, and real-time performance must be guaranteed. The 5 GHz Wi-Fi band, which is advantageous in bandwidth, communications speed, and wireless saturation of the wireless network, was selected as the data communications network between vehicles. This study analyzes how to design and implement a 5 GHz Wi-Fi network in a vehicle network. Considering the characteristics of the mobile communication terminal device, a continuous variable communications structure is proposed to enable high-speed data switching. We simplify the access point access procedure to reduce the latency between wireless terminals. By limiting the Transmission Control Protocol Internet Protocol (TCP/IP)-based Dynamic Host Configuration Protocol (DHCP) server function and implementing it in a broadcast transmission protocol method, communication delay between terminal devices is improved. Compared to the general commercial Wi-Fi communication method, the connection operation and response speed have been improved by five seconds or more. Utilizing this method can be applied to various types of event data communication between vehicles. It can also be extended to wireless data-based intelligent road networks and systems for autonomous driving.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.13-23
• /
• 2013

Purpose - There is a dominant opinion that medium and small enterprises in the Korean economy have not developed qualitatively but only towards quantitative growth and, therefore, the unbalanced structure between large enterprises and those that are medium and small has worsened. In particular, this rapid industrialization causes after-effects such as polarization as well as anti-business sentiment, the collapse of the middle class, and hostility against the establishment. The consensus contends that it is difficult for Korea to be an advanced nation without resolving these problems. This paper attempts to suggest a co-prosperity model by limiting the focus to business relations with medium and small manufacturers (with regard to investment among the various co-prosperity institutions of POSCO). These co-prosperity institutions have been established in POSCO; however, it is thought that the development of a co-prosperity model regarding investment in medium and small manufacturers will help many needy investment manufacturers. Research design, data, and methodology - This study analyzes research on the co-prosperity model, using it to examine Korean cases and foreign cases. The co-prosperity model has been continuously extended but is determined to be seriously insufficient. The purpose of this study is to develop the Korean co-prosperity model by reinterpreting it in various aspects. In order to develop the Korean co-prosperity model, this study suggests the case of the establishment of the co-prosperity model by POSCO with medium and small manufacturers with regard to investment. This model is expected to be presented to many enterprises as the future co-prosperity model. Results - To date, analysis of the co-prosperity model itself and the co-prosperity model through the case of POSCO have been suggested. As empirical studies on co-prosperity in Korea are not sufficient, successful models of co-prosperity should be developed in various aspects in future. It is expected that through this study, medium and small manufacturers would have an opportunity to find various growth engines by actively using the cooperation platform and establishing optimized competitiveness of steel material through a steel business model. The ecosystem of enterprises may evolve and be healthier by making more joint products through productive business relationships between large enterprises and those that are medium and small. From the enterprises' ecosystem viewpoint, cooperation between such businesses rather than one-way support is identified as an essential element for the security of inter-competitiveness. Conclusions - Infrastructure should be established to form a dynamic industry ecosystem not by transient efforts in co-prosperity, but by an entire culture of co-prosperity across industries. In this respect, the leading role of public institutions needs to be intensified initially. In addition, the effects of co-prosperity should be extended to blind spots of policies such as third party companies and regions. A precise co-prosperity monitoring system should be established to continuously conduct and extend these efforts.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.1
• /
• pp.75-84
• /
• 1999

Although many studies on modelling of port competitive situation have been conducted, both theoretical frame and methodology are still very weak. In this study, therefore, a new algorithm called ESD (Extensional System Dynamics) for the evaluation of port competition was presented, and applied to simulate port systems in northeast asia. The detailed objectives of this paper are to develop Unit fort Model by using SD(System Dynamics) method; to develop Competitive Port Model by ESD method; to perform sensitivity analysis by altering parameters, and to propose port development strategies. For these the algorithm for the evaluation of part's competition was developed in two steps. Firstly, SD method was adopted to develop the Unit Port models, and secondly HFP(Hierarchical Fuzzy Process) method was introduced to expand previous SD method. The proposed models were then developed and applied to the five ports - Pusan, Kobe, Yokohama, Kaoshiung, Keelung - with real data on each ports, and several findings were derived. Firstly, the extraction of factors for Unit Port was accomplished by consultation of experts such as research worker, professor, research fellows related to harbor, and expert group, and finally, five factor groups - location, facility, service, cargo volumes, and port charge - were obtained. Secondly, system's structure consisting of feedback loop was found easily by location of representative and detailed factors on keyword network of STGB map. Using these keyword network, feedback loop was found. Thirdly, for the target year of 2003, the simulation for Pusan port revealed that liner's number would be increased from 829 ships to 1,450 ships and container cargo volumes increased from 4.56 million TEU to 7.74 million TEU. It also revealed that because of increased liners and container cargo volumes, length of berth should be expanded from 2,162m to 4,729m. This berth expansion was resulted in the decrease of congested ship's number from 97 to 11. It was also found that port's charge had a fluctuation. Results of simulation for Kobe, Yokohama, Kaoshiung, Keelung in northeast asia were also acquired. Finally, the inter port competition models developed by ESB method were used to simulate container cargo volumes for Pusan port. The results revealed that under competitive situation container cargo volume was smaller than non-competitive situation, which means Pusan port is lack of competitive power to other ports. Developed models in this study were then applied to estimate change of container cargo volumes in competitive relation by altering several parameters. And, the results were found to be very helpful for port mangers who are in charge of planning of port development.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.537-543
• /
• 2017

Underwater glider is the long-term operating underwater robot that was developed with a purpose of continuous oceanographic observations and explorations. Torpedo-type underwater glider is not efficient from an aspect of maneuverability, because it uses a single buoyancy engine and motion controller for obtaining propulsive forces and moments. This paper introduces a ray-type underwater glider(RUG) with dual buoyancy engine, which improves the control performance of buoyancy and motion compared with torpedo-type underwater glider. Carrying out Computational Fluid Dynamics (CFD) analysis as static pitch drift test, the performance of fluid resistance for gliding motion was identified. Based on the calculated hydrodynamic coefficients, the dynamic simulation compared and analyzed the motion performance of torpedo-type and ray-type while controlling same volume of buoyancy engine. Small-sized model of RUG was developed to perform fundamental performance tests.

• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.157-166
• /
• 2008

The ubiquitous service environment is poor in reliability of connection and also has a high probability that the intrusion against a system and the failure of the services may happen. Therefore, It is very important to guarantee that the legitimate users make use of trustable services from the viewpoint of security without discontinuance or obstacle of the services. In this paper, we point out the problems in the standard Jini service environment and analyze the Jgroup/ARM framework that has been developed in order to help fault tolerance of Jini services. In addition, we propose a secure Jini service architecture to satisfy the security, availability and quality of services on the basis of the analysis. The secure Jini service architecture we propose in this paper is able to protect a Jini system not only from faults such as network partition or server crash, but also from attacks exploiting flaws. It provides security mechanism for dynamic trust establishment among the service entities. Moreover, our secure Jini service architecture does not incur high computation costs to merge the user service states because of allocation of the replica based on each session of a user. Through the experiment on a test-bed, we have confirmed that proposed secure Jini service architecture is able to guarantee the persistence of the user service states at the level that the degradation of services quality is ignorable.

• Journal of Science of Art and Design
• /
• v.12
• /
• pp.5-41
• /
• 2007

As public attention on Well-being culture increases, it is now considered to be a new trend of modern society. The purpose of this study is to publicize the necessity of design products which are advanced in quality and encourage the use of it. The researcher judged that study on design of lighting product to adopt well-being trend is in preliminary level and aims to research on the tendency of well-bing trend and lighting design which the consumer of this age is demanding. As the result of changes in modern consumption trend, design is considered to be a factor of capricious cultural phenomenon. In addition to this, as high technology such as ubiquitous develops with the degitalisation and informatization, the consumer are paying attention to dynamic products rather than static products or products which respond to external stimulus. Products which adopt well-being trend pursuing nature friendly life are particularly preferred It means that not only the basic function of products but also design which satisfy the five sense is required. Modern consumers use products in various way. However, the pro-environmental and human-centered tendency is tried only in very limited area and general study on this matter is extremely rare. This study analyzes the factors which intercepts the adoption of well-being trend to lighting products and seeks for an alternative to solve the problem. Interaction design with well-being trend was adopted to lighting design and the result presented that there is a possibility to differentiate existing lighting design by adding interaction design to the existing lighting design. Therefore, the need for further study on this matter is presented.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.145-154
• /
• 2007

Determining stop spacing is a very important process in transit system planning. This study is involved in an analytical approach to decide the transit stop spacing. Transit stop spacing should be longer as 1) user access speed, 2) user travel time, and 3) dwell time increase, and shorter as 1) passengers (boardings and alightings) and 2) headway increase. In this study, a methodology is proposed to determine transit stop spacing to minimize total cost (user cost plus operator cost) with irregular passenger distribution (boardings and alightings) Without considering in-vehicle passengers, the transit stop spacing should be shorter in the concentrated sections of the passenger distribution than in others to minimize total cost. Through the conceptual analysis, it is verified that the transit stop spacing could be longer as the in-vehicle passengers increase in certain sections. This study proposes a simple practical method to determine transit stop spacing and locations instead of a dynamic programming method which generally includes a complex and difficult calculation. If the space axis is changed to a time axis. the methodology of this study could be expanded to analyze a solution for the transit service (or headway) schedule problem.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.412-418
• /
• 2020

Generally, the propeller shaft that constitutes the ship shaft system has different patterns of behavior due to the ef ects of engine power, propeller load and eccentric thrust, which increases the risk of bearing failure by causing local load variations. To prevent this, different studies of the propulsion shaft system have been conducted focused the relative inclination angle and oil film retention between the shaft and the support bearing, mainly with respect to the Rules for the Classification of Steel Ships. However, in order to secure the stability of the propulsion shaft via a more detailed evaluation, it is necessary to consider dynamic conditions, including the transient state due to sudden change in the stern wakefield. In this context, a 50,000 DWT vessel was analyzed using the strain gauge method, and the effects of propeller shaft movement were analyzed on the starboard rudder turn which is a typical transient state during normal continuous rate(NCR) operation in ballast draught condition. Analysis results confirm that the changed propeller eccentric thrust acts as a force that temporarily pushes down the shaft to increase the local load of the stern tube bearing and negatively affects the stability of the shaft system.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.1
• /
• pp.9-26
• /
• 2005

In the pursuit of ever higher levels of performance, recent computer systems have made use of deep pipeline, dynamic scheduling and multi-issue superscalar processor technologies. In this situations, branch prediction schemes are an essential part of modem microarchitectures because the penalty for a branch misprediction increases as pipelines deepen and the number of instructions issued per cycle increases. In this paper, we propose a novel branch prediction scheme, direction-gshare(d-gshare), to improve the prediction accuracy. At first, we model a neural network with the components that possibly affect the branch prediction accuracy, and analyze the variation of their weights based on the neural network information. Then, we newly add the component that has a high weight value to an original gshare scheme. We simulate our branch prediction scheme using Simple Scalar, a powerful event-driven simulator, and analyze the simulation results. Our results show that, compared to bimodal, two-level adaptive and gshare predictor, direction-gshare predictor(d-gshare. 3) outperforms, without additional hardware costs, by up to 4.1% and 1.5% in average for the default mont of embedded direction, and 11.8% in maximum and 3.7% in average for the optimal one.