• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.201-204
• /
• 2006

이 연구는 DVB-S2 전송시스템을 Ku/Ka대역 위성방송서비스에 적용하는 방안을 제안하였다. 이를 위하여 DVB-S2 전송시스템의 수신성능을 변조방식 및 LDPC 부호 율에 따라 S/W 모의실험을 통하여 분석하였으며, 우리나라가 속한 K지역에서 시간 율에 따른 강우감쇠 정도를 Ku 및 Ka대역에서 분석하였다. 수신성능 분석결과와 시간 율에 따른 강우감쇠 정도를 이용하여, Ku 및 Ka대역에서 특정 시간 율을 만족하는 위성방송서비스를 제공하기 위한 DVB-S2 전송시스템의 변조방식 및 LDPC 부호 율을 제안하였다.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.273-283
• /
• 1996

A cation-exchange membranes were prepared by polystyrene and poly(sodium 4-styrene sulfonate). The degree of crosslinking of polystyrene membranes was controlled by DVB. At the same time, the structure of PS membranes was changed from RO to MF by varying the concentration of PSS in the casting solution. Water flux increased with PS-PSS membranes due to the sulfonate groups, and final membrane cast from the solution containing 5% of DVB and 3% of PSS showed MF structure.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.157-158
• /
• 2007

In this paper, an internal wideband DVB-H antenna using parasitic patch is proposed. The antenna consists of rectangular patch with system ground and shorting plate. The -10 dB impedance bandwidth of proposed antenna is about 530 MHz ($470{\sim}1000\;MHz$). Radiation patterns are nearly omni-directional for operating frequency. It is suitable for DVB-H application.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.28-33
• /
• 2008

We have proposed a novel DVB-H(Digital Video Broadcast for Handheld) antenna for folder-type mobile handheld terminal by using a coupling element, a stub, and an L-type matching circuit. The L-type matching circuit consisting of two chip inductors is used for achieving an improved impedance matching over the DVB-H frequency band ($470{\sim}702\;MHz$). Simulated results showed the stub worked to more knot the lower and upper frequency ends of the input impedance curve. The antenna exhibits a flat gain characteristic from 2 to 2.8 dBi over the DVB-H frequency band. The radiation patterns are a stable Figure-of-eight radiation pattern in the frequency range.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.78-83
• /
• 2011

In this paper, we propose a computationally efficient early stopping method to reduce the average number of iterations. The conventional early stopping methods have too much computational complexity to compute the stopping criterion. Thus, only the hard decision based early stopping method is suitable to realize the hardware of LDPC decoder. However, this method also can increase the computational complexity of LDPC decoder. The proposed method can effectively reduce the computational complexity of stopping criterion as we do not compute hard decision, and we combine the stopping criterion with horizontal shuffling scheduling decoding scheme. The simulation results show that a new early stopping method achieves acceptable bit error rate performance also reduces the average number of iterations.

• Journal of Advanced Navigation Technology
• /
• v.6 no.4
• /
• pp.290-295
• /
• 2002

In Mpeg-4 system, objects are composed of ES(Elementary Stream). Each of the objects is managed independently by object-based coding and is transmitted via DMIF(Delivery Multimedia Integration Framework). The data streams in Mpeg-4 are transmitted with using DVB-Data Carousel which can improve the reliability and efficiency by cyclic retransmission. This paper describes a system which transmits some part of data stream of Mpeg-4 object with using DVB-Data Carousel to clients via satellite. This also uses a performance enhancing proxy server for reducing round trip time between ground network and satellite.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.118-124
• /
• 2008

For forward error correction, DVB-S2, which is the digital video broadcasting forward error coding and modulation standard for satellite television, uses a system based the concatenation of BCH with LDPC inner coding. In DVB-S2 the LDPC codes are defined for 11 different code rates, which means that a DVB-S2 LDPC decoder should support multiple code rates. Seven of the 11 code rates, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, and 9/10, are regular and the rest four code rates, 1/4, 1/3, 2/5, and 1/2, are irregular. In this paper we propose a flexible decoder for the regular LDPC codes. We combined the partially parallel decoding architecture that has the advantages in the chip size, the memory efficiency, and the processing rate with Benes network to implement a DVB-S2 LDPC decoder that can support multiple code rates with a block size of 64,800 and can configure the interconnection between the variable nodes and the check nodes according to the parity-check matrix. The proposed decoder runs correctly at the frequency of 200MHz enabling 193.2Mbps decoding throughput. The area of the proposed decoder is $16.261m^2$ and the power dissipation is 198mW at a power supply voltage of 1.5V.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.204-214
• /
• 2013

Recently various research have been conducted relating to the implementation of signal processing or communication system by software using the massively parallel processing capability of the GPU. In this work, we focus on reducing software simulation time of 2K/8K FFT in DVB-T by using GPU. we estimate the processing time of the DVB-T system, which is one of the standards for DTV transmission, by CPU. Then we implement the FFT processing by the software using the NVIDIA's massively parallel GPU processor. In this paper we apply stream process method to reduce the overhead for data transfer between CPU and GPU, coalescing method to reduce the global memory access time and data structure design method to maximize the shared memory usage. The results show that our proposed method is approximately 20~30 times as fast as the CPU based FFT processor, and approximately 1.8 times as fast as the CUFFT library (version 2.1) which is provided by the NVIDIA when applied to the DVB-T 2K/8K mode FFT.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.8-14
• /
• 2008

In this paper, we analyze throughput performance of MF-TDMA scheme and QS MC-DS/CDMA(quasi-synchronous MC-DS/CDMA) scheme based on scrambling on WH sequence and PPGC sequence in early frequency offset caused by high speed transfer terminal. QS MC-DS/CDMA scheme with scrambled WH sequence shows 5.7% higher throughput than MF-TDMA scheme and 8% higher throughput than QS MC-DS/CDMA with PPGC sequence in high speed transfer terminal environment such as maximum 1000Km/h speed with high frequency of Ka-band. Finally, we show that QS MC-DS/CDMA scheme with scrambled WH sequence is more efficient than traditional MF-TDMA scheme at the aspect of throughput in DVB-RCS system with Ka frequency band.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.109-114
• /
• 2015

Frame synchronization is achieved by correlation between received symbols and a preamble pattern which is periodically appended at a frame header. In this paper, we deal with a frame detection method complaint with satellite-based DVB-S2 system. In DVB-S2, frame synchronization is performed under the low signal-to-noise ratio(SNR), a large frequency offset which can be up to 20% of a symbol transmission rate and unknown modulation schemes ranging from QPSK to 32-APSK. In this environment, we propose a method combining differential correlation based on SOF and PLSC with an accumulated correlation method for the detection of frame structures. In addition, detection performances about mean acquisition time(MAT) and detection error probability are evaluated via computer simulations.