• Mycobiology
• /
• v.48 no.1
• /
• pp.37-43
• /
• 2020

A serious leaf disease caused by Colletotrichum dematium was found during the cultivation of Sarcandra glabra in Jingxi, Rong'an, and Donglan Counties in Guangxi Province, which inflicted huge losses to plant productivity. Biological control gradually became an effective control method for plant pathogens. Many studies showed that the application of actinomycetes in biological control has been effective. Therefore, it may be of great significance to study the application of actinomycetes on controlling the diseases caused by S. glabra. Strains of antifungal actinomycetes capable of inhibiting C. dematium were identified, isolated and screened from healthy plants tissues and the rhizospheres in soils containing S. glabra. In this study, 15 actinomycetes strains were isolated and among these, strains JT-2F, DT-3F, and JJ-3F, appeared to show antagonistic effects against anthracnose of S. glabra. The strains JT-2F and DT-3F were isolated from soil, while JJ-3F was isolated from plant stems. The antagonism rate of strain JT-2F was 86.75%, which was the highest value among the three strains. Additionally, the JT-2F strain also had the strongest antagonistic activity when the antagonistic activities were tested against seven plant pathogens. Strain JT-2F is able to produce proteases and cellulase to degrade the protein and cellulose components of cell walls of C. dematium, respectively. This results in mycelia damage which leads to inhibition of the growth of C. dematium. Strain JT-2F was identified as Streptomyces tsukiyonensis based on morphological traits and 16S rDNA sequence analysis.

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.222-229
• /
• 2020

Membrane assisted condenser is an innovative membrane operation that exploits the hydrophobic nature of microporous membranes to promote water vapor condensation and recovery. It can be used for water and chemicals recovery from waste gaseous streams. In this work, the testing of membrane condenser for water and ammonia recovery from synthetic streams (i.e., a saturated air stream with ammonia) simulating the plume of cooling tower is illustrated. The modeling of the process was carried out for predicting the membrane-based process performance and for identifying the minimum operating conditions for effectively recovering liquid water. The experimental data were compared with the results achieved through the simulations showing good agreement and confirming the validity of the model. It was found that the recovery of water can be increased growing the temperature difference between the plume and the membrane module (DT), the relative humidity of the plume (RH^plume) and the feed flow rate on membrane area ratio. Moreover, the concentration of NH₃ in the recovered liquid water increased with the growing DT, at increasing NH₃ concentration in the fed gaseous stream and at growing relative humidity of the feed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.473-477
• /
• 2007

The development of advanced Insulated Gate Bipolar Transistor(IGBT)has enabled high-frequency switching operation and has improved the performance of PWM inverters for motor drive. However, the high rate of dv/dt of IGBT has adverse effects on motor insulation stress. In many motor drive applications, the inverter and motor are separated and it requires long motor feds. The long cable contributes high frequency ringing at the motor terminal and it results in hight surge voltage which stresses the motor insulation. The inverter output filter and RDC snubber are conventional method which can reduce the surge voltage. In this paper, we propose the new low loss snubber to reduce the motor terminal surge voltage. The snubber consists of the series connection of charging/discharging capacitor and the voltage-clamped capacitor. At IGBT turn-off, the snubber starts to operate when the IGBT voltage reaches the voltage-clamped level. Since dv/dt is decreased by snubber operating, the peak level of the surge voltage can be reduced. Also the snubber operates at the IGBT voltage above the voltage-clamped level, the snubber loss is largely reduced comparing with RDC snubber. The proposed snubber enables to reduce the motor terminal surge voltage with low loss.

• The Korean Journal of Ecology
• /
• v.19 no.2
• /
• pp.151-163
• /
• 1996

To investigate the early symptoms of light-chilling, alterations of chlorophyll fluorescence transients were monitored in cucumber (Cucumis sativus L. cv. Ilmichungjang) leaves. During 24 h chilling, decreases in (Fv)m/Fm, qE and qQ, and an increase in Fo were observed. The chilling effects were not recovered at room temperature, and a significant increase in Fo was observed during the recovery period. After 6 h chilling, ‘dip’(D) level of the transients became obscure, and the negative slope after ‘peak’(P) disappeared. The first derivative (dFv/dt) of the fast fluorescence rise curve was used to obtain more accurate information about the changes in the transients. The maximal rate of the fluorescence increase in the D-p rise curve (Fr) has been the most frequently used chilling stress indicator. However, a correct value of Fr could not be measured when the D level became obscure. This problem was overcome by introducing a new indicator, HFr (dFv/dt at Fv = 1/2 (Fv)m), and HFr gave very similar values to Fr. To monitor the changes in curvature around D level, another new parameter, ${\Delta}S$(D-Fr), was also introduced. These three parameters decreased very sensitively during light-chilling. In addition, increases in these parameters were observed during the first 2 h chilling, but this increase in Fr was also observed in pea leaf discs dark-chilled for 15 min, suggesting that this very early change is a common response to chilling in both pea and cucumber leaves. Quenching coefficients were also very sensitive to chilling, especially qE. Discussion on the usage of these parameters as chilling stress indicators is given in the text.

• Korean Journal of Food Science and Technology
• /
• v.17 no.2
• /
• pp.101-106
• /
• 1985

Dried soymilk residue(SMR) which was prepared by washing with ethanol and acetone, followed by drying at $60^{\circ}C$ was investigated for its sorption characteristics and the relationship between moisture content and water activity when it was mixed with wheat flour. During storage at $20^{\circ}C$ and various RH, an excess sorption phenomena was observed for solvent treated and dried SMR before equilibrium reached. A simple equation of log(dw/dt)=b log t+log a, where t is storage time(hr) and w is %$(H_2O)$ was drived for sorption or desorption rate of dried SMR at RH range of 12%-92%. From sorption isothermifigure, the moisture content(Mi) could be calculated from water activity by the equation of Mi=b Aw+a. The proposed equation was proved to have better fitness than those of the Smith isotherm equation or Lang and Steinberg equation for the mixture of dried SMR and wheat flour.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.177-185
• /
• 2001

In this work, the cure kinetics and rheological properties of difunctional epoxy(diglycidylether of bisphenol A, DGEBA)/polysulfone (PSF) blends were investigated using differential scanning calorimeter and rheometer. From the DSC results of the blends, the temperature of the exothermic peak and cure activation energy (E) using a half-width method were increased with increasing the PSF content to neat epoxy resin up to 30 wt%. However, a marginal decrease in the blend system was shown in E. The conversion ($\alpha$) and conversion rate (d$\alpha$/dt) were decreased as the content of PSF increases. Rheological properties of the blend system were investigated under isothermal condition using a rheometer. Cross-linking activation energy (E$_{c}$) was determined from the Arrhenius equation based on gel time and curing temperature. As a result, the E$_{c}$ showed a similar behavior with E which could be resulted from high viscosity of PSF and the phase separation between DGEBA and PSF.PSF.f PSF and the phase separation between DGEBA and PSF.PSF.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.375-385
• /
• 2006

The purpose of this study is to analyze the influence of attitude of mothers on the dental health and behavior of dental health management on children on the dental caries of their children, and the questionnaire survey was implemented and analyzed for 202 children in fifth and sixth grades of two elementary schools in Ulsan City along with their mothers with the following outcome. 1. 80 students from entire subject students(39.6%) are subjects of dental caries with the average DT index shown to be $1.78{\pm}1.04$ and tended to have higher in the upper level of grade. 2. In the attitude of dental health management for mother, 95 students(47.0%) visited the dental clinic within 6 months with the main purpose of treatment, rather than preventive work, for 141 students(69.8%), and hey have high level of interests on the teeth condition of their children but they rarely take a close look at the dental condition for their children. 3. The efforts of mothers on preventing the dental caries by mothers showed in the sequence of regular instructions for brushing, limiting the sugar intake, fluorine coating, sealant, regular examination and the like and DT rate will be decreased by these kinds(p<0.05). 4. The number of dental caries of children with the attitude of mother in dental health showed noticeable differences statistically with respect to the brushing method, use of dental sanitation goods, scaling, visit to dental office and others(p<0.05). With the above conclusion, the attitude and behavior of mothers on dental care influences greatly on the dental health of children. Therefore, in order to improve the dental health of children, it would be important to recognize the importance of attitude and behavior of dental health for mothers for positive dental care with the support in policies.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.50-54
• /
• 1986

The sorption characteristics of green tea were investigated at $20^{\circ}C$ with various relative humidities. Particle size showed little effect on the sorption behavior of green tea. At low relative humidities below 57%, the sorption equilibrium were easily attained, but a high relative humidities above 75%, the sorption equilibrium were not reached after 10 days. From the estimation of sorption rate at arbitrary humidities an empirical equation was obtained; $Ln{\frac{dw}{dt}}=nLn(t)+Lnc$ The monolayer moisture contents of green tea obtained by B.E.T. equation were found to be 7.87%(powder) and 7.01%(whole), respectively.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.4
• /
• pp.447-457
• /
• 2022

Notoginsenoside R1 and ginsenoside Rg1 are the main active ingredients of Panax notoginseng, exhibiting anti-fatigue, anti-tumor, anti-inflammatory, and other activities. In a previous study, a GH39 β-xylosidase Xln-DT was responsible for the bioconversion of saponin, a natural active substance with a xylose group, with high selectivity for cleaving the outer xylose moiety of notoginsenoside R1 at the C-6 position, producing ginsenoside Rg1 with potent anti-fatigue activity. The optimal bioconversion temperature, pH, and enzyme dosage were obtained by optimizing the transformation conditions. Under optimal conditions (pH 6.0, 75℃, enzyme dosage 1.0 U/ml), 1.0 g/l of notoginsenoside R1 was converted into 0.86 g/l of ginsenoside Rg1 within 30 min, with a molar conversion rate of approximately 100%. Furthermore, the in vivo anti-fatigue activity of notoginsenoside R1 and ginsenoside Rg1 were compared using a suitable rat model. Compared with the control group, the forced swimming time to exhaustion was prolonged in mice by 17.3% in the Rg1 high group (20 mg/kg·d). Additionally, the levels of hepatic glycogen (69.9-83.3% increase) and muscle glycogen (36.9-93.6% increase) were increased. In the Rg1 group, hemoglobin levels were also distinctly increased by treatment concentrations. Our findings indicate that treatment with ginsenoside Rg1 enhances the anti-fatigue effects. In this study, we reveal a GH39 β-xylosidase displaying excellent hydrolytic activity to produce ginsenoside Rg1 in the pharmaceutical and food industries.