• Journal of Multimedia Information System
• /
• v.7 no.1
• /
• pp.55-72
• /
• 2020

As the IT service environment grows, it is critical in terms of IT service quality to minimize the occurrence of failures due to changes in applications and to diagnose and recover in a short period of time how failure will affect the business. Thus, the Defense Acquisition Program Administration (DAPA) has been building and operating ITSMs to implement IT service management in a leading manner. Information Technology Service Management (ITSM) is divided into events, obstacles, changes, versions and setup management to ensure flexibility and stability in service delivery. It is also operated separately from service level, availability, capacity, financial and IT service continuity management to ensure service quality and cost efficiency. Based on ITSM military service history, this study looks at the impact of quality of service on value, satisfaction, and trust. The results of the analysis are highly valuable for future ITSM implementation and operation.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2637-2639
• /
• 2002

This paper presents the design and implementation of a baseband Modem using DSP that supports a wireless LAN. It is implemented with DSP and D/A and A/D Converters in baseband and tested without using IF and RF modules. In this paper, we have used the matched filler and DLL(delay lock loop) for synchronization. And the matched filter and the carrier recovery are directly connected. Therefore, the proposed architecture is very simple and the operation of DSP becomes fast.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.465-467
• /
• 1999

The data transmission system in MAGLEV is required a high quality and high speed for a train safety and reliability driving. In the transmission channel between a vehicle and a ground-site, Gaussian noise is negligible, but impulse noise from the chopper controlled propulsoin unit and the Power supplying device is very severe. The transmission channel must be protected from these noise. In this paper, we propose a DSSS (direct-sequence spread spectrum) modulation as a new data transmission technique in the railway and analyze this data transmission characteristics.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.84-92
• /
• 2010

Prior to the launch of COMS Satellite, the validation of the ground system for satellite operations has been performed using the real COMS, the satellite simulator and etc. In particular this paper will focus on the part of ground system test on which the simulator is used and it will present the usage, range and importance of the simulator utilization. Furthermore, it describes the practical experience on and its effect using Simulator for system validation, and suggests approaches to overcome a partial limitation.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.2
• /
• pp.77-82
• /
• 2008

The diversity reception and the equal gain combining technique are applied to the compensation of the distortion of channel, which occurs in transmission of data at rapid speed. DSSS BPSK system which has the receiving structure with the compensation algorithm is formed on the diversity branch, and the characteristics of the system are evaluated at the view point of the average bit error rate due to the SNR. In addition, the multi-tap update algorithm which is superior for the data compensation is suggested. Moreover, using the American Joint Technical Committee PCS RF channel characterization and system deployment model standard, the suggested multi-tap update algorithm is compared and analyzed with the view-point of the average bit error rate and convergence speed for evaluating the realistic efficiency of the system.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.491-501
• /
• 2014

Recently, the need for disaster-preventing broadcast has increased gradually to cope with natural disaster like earthquake and tsunami causing enormous losses of both life and property. In disaster-preventing broadcast system, the wake-up signal is used to alert user terminal and switch the current state of channel to the emergency channel, which is for the fast and efficient delivery of emergency information. In this paper, we propose the detection method of wake-up signal for disaster-preventing broadcast systems. The wake-up signals for disaster-preventing broadcast should have a good auto-correlation property in low power and narrow-band conditions that does not affect the existing digital television (DTV) system. The suitability of the m-sequence and complementary code (CC) is analyzed for wake-up signals according to signal to noise ratio. A wake-up signal is proposed by combining the direct sequence spread spectrum (DSSS) technique and pseudo noise (PN) sequences such as Barker and Walsh-Hadamard codes. By using the proposed method, a higher detecting performance can be achieved by the spreading gain compared to the single long m-sequence and the Golay code.

• Journal of Korea Foundry Society
• /
• v.35 no.5
• /
• pp.114-119
• /
• 2015

This paper reports the effect of a refractory crucible type on the microstructure of duplex stainless steel (DSS) cast with the addition of gadolinium using air-induction melting. Grade 4A DSSs with 1 wt% of gadolinium (Gd) were fabricated in various crucibles including alumina ($Al_2O_3$), magnesia (MgO), calcia (CaO) coated with yttria ($Y_2O_3$) and graphite. The standard free energies of the formation of calcium and yttrium oxide were lower than those of gadolinium oxide and other crucible elements based oxide. The yield of Gd in DSS using $Al_2O_3$, MgO, CaO-coated $Y_2O_3$ and graphite was 5, 19, 83 and 96%, respectively. As Gd yield increased, the amount of Gd-based inclusions increased, the size of the inclusions were reduced, and the inclusions became evenly distributed.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.1
• /
• pp.53-59
• /
• 2015

This paper proposes a novel method for acoustically and wirelessly transmitting data underwater with a high transmission rate. The method uses the most promising physical layer and multiple access technique (i.e., the code division multiple channel access technique) to divide the channel into subchannels. Data is transmitted through these subchannels. The codes are pseudo-random noise (PN) sequences. In the spread-spectrum technique, a signal such as electrical, electromagnetic, acoustic signal generated in a particular bandwidth is deliberately spread in the frequency domain, which results in a signal with a wider bandwidth. This paper reviews the possibility of application of the direct-sequence code division multiple access (DS-CDMA) technique in an underwater system using MATLAB. As the result of our review, we recognize that the DS-CDMA technique can be applied to underwater environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.906-911
• /
• 2001

In this paper, LPI(low probability of intercept) and AJ(anti jamming) performance of the chirped BPSK system are analyzed. In the chirp method the cyclostationary of the signal is eliminated, since the instantaneous frequency is varied randomly within the whole spread bandwidth. Therefore, chirp method is considered for good LPI system against DAM(delay-and-multiplier) or SC (squaring circuit) interceptor which detects the chip rate or carrier frequency. Longer chirp duration makes the LPI performance better. From the simulation results, the chirp method has better AJ performance than DS(direct sequence) system in the PBNJ(partial band noise jammer) channel. At the same JSR(jammer to signal power ratio) level, chirped BPSK system has more robust AJ performance against MTJ(multi-tone jammer) than PBNJ.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.537-546
• /
• 2001

Griffth's and LCCMA which are Single-user detection adaptive algorithm are proposed for mitigate MAI(multiple access interference) and the near-far problem in direct-sequence spread-spectrum CDMA system and MOE Algorithm is proposed for MMSE(Minimum Mean-Square Error). This paper pertains to three types of Blind adaptive algorithms which can upgrade system functionality without the requirements from training sequence. It goes further to compare and analyze the functionalities of the algorithms as per number of interfering users or data update rate of the users. The simulation results was that LCCMA algorithm was superior to other algorithms in both areas. Blind application enabled a more flexible network design by eliminating the necessity of training sequence.