• 전자공학회논문지SC
• /
• 제48권1호
• /
• pp.31-38
• /
• 2011

다양한 산업 응용분야에 사용되는 전동기 구동시스템의 고장은 심각한 문제를 초래한다. 본 논문에서는 전압형 PWM 인버터의 스위치 개방고장에 대한 검출 기법을 제안한다. 제안방법은 dq 전류를 정규화하여 dq 상전류의 평균값으로 고장을 검출하고 1차 분류를 실시한다. 분류된 결과에 따라 dq 상전류의 관계, 값의 범위, 전류의 분포 위치 등의 특정을 이용하여 2차 분류를 실시하여 그 결과로 고장 스위치를 진단한다. 제안방법은 MATLAB을 이용하여 인버터 스위치 개방고장진단에 관한 모의실험을 수행하였고 제안방법의 실용성을 입증하였다. 제안방법은 간단한 알고리즘으로 구현이 가능하며 그로 인해 일반적인 유도전동기 구동시스템에 추가하여 사용하는 것이 가능하다.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.85-91
• /
• 2021

방위사업청은 2012년부터 군수품의 우수한 기술력과 품질을 인증하기 위해 DQ마크(Defense Quality Mark) 인증제도를 운영하고 있다. 하지만, 현행 DQ마크 인증제도는 소프트웨어(Software, SW) 단독 제품의 품질을 검증할 수 없어 소프트웨어 제품에 직접 DQ마크 인증을 부여하지 못하고 있다. 그러므로 본 논문은 DQ마크 인증제도에서 소프트웨어 제품의 품질을 검증할 방안을 찾기 위해 DQ마크 인증제도의 인증심사 절차와 국내·외 소프트웨어 품질평가, 인증 표준을 분석하였다. 그 중 국제표준인 ISO/IEC 25000 시리즈를 따르는 GS(Good Soft) 인증제도를 DQ마크 인증제도에 적용하는 방안을 개선방안으로 제시하여 DQ마크 인증제도에서 소프트웨어 제품의 품질을 검증하여 인증을 부여할 수 있도록 인증범위의 확대를 꾀하였다. 본 논문은 DQ마크 인증제도에 GS인증제도를 도입함으로써 시스템 소프트웨어 단독 제품에 대해 DQ마크 인증을 부여할 수 있도록 기존 인증절차에서 소프트웨어 제품 품질 평가에 불필요한 절차인 공장심사의 생략과 제품심사에 GS 인증서를 제출받아 검증하는 개선된 절차를 제안했고, 부여받은 DQ마크를 활용한 방산수출의 증대와 GS인증을 통한 국방 분야 소프트웨어 제품의 품질향상을 기대한다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권2호
• /
• pp.116-120
• /
• 2014

3-phase Induction machines are being used in industry and dq transformation from 3 phase of a, b, c is commonly used to analyze these machines. The equivalent circuits of d and q axis are however generally cross coupled and not simple to analyze. In this study, an analysis method of 3ph induction motor considering current regulator using dq transformation and matrix vector is proposed and it can explain the 3ph induction motor physically. This model does not need the separating process of d and q components. With this technique, the model becomes simple, is easy to understand in physical, and can get the same results with those from the other dq models. These simulation results of the proposed model are compared with those of other models for the conformation of the proposed method.

• Steel and Composite Structures
• /
• 제28권4호
• /
• pp.509-516
• /
• 2018

The differential quadrature (DQ) and teaching-learning based optimization (TLBO) methods are coupled to introduce a hybrid numerical method for maximizing fundamental natural frequency of laminated composite skew plates. The fiber(s) orientations are selected as design variable(s). The first-order shear deformation theory (FSDT) is used to obtain the governing equations of the plate. The equations of motion and the related boundary conditions are discretized in space domain by employing the DQ method. The discretized equations are transferred from the time domain into the frequency domain to obtain the fundamental natural frequency. Then, the DQ solution is coupled with the TLBO method to find the maximum frequency of the plate and its related optimum stacking sequences of the laminate. Convergence and applicability of the proposed method are shown and the optimum fundamental frequency parameter of the plates with different skew angle, boundary conditions, number of layers and aspect ratio are obtained. The obtained results can be used as a benchmark for further studies.

• Structural Engineering and Mechanics
• /
• 제25권2호
• /
• pp.161-180
• /
• 2007

A first endeavor is made to exploit the differential quadrature method (DQM) as a simple, accurate, and computationally efficient numerical tool for the large deformation analysis of thin laminated composite skew plates, which has very strong singularity at the obtuse vertex. The geometrical nonlinearity is modeled by using Green's strain and von Karman assumption. A recently developed DQ methodology is used to exactly implement the multiple boundary conditions at the edges of skew plates, which is a major draw back of conventional DQM. Using oblique coordinate system and the DQ methodology, a mapping-DQ discretization rule is developed to simultaneously transform and discretize the equilibrium equations and the related boundary conditions. The effects of skew angle, aspect ratio and different types of boundary conditions on the convergence and accuracy of the presented method are studied. Comparing the results with the available results from other numerical or analytical methods, it is shown that accurate results are obtained even when using only small number of grid points. Finally, numerical results for large deflection behavior of antisymmetric cross ply skew plates with different geometrical parameters and boundary conditions are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.924-925
• /
• 2008

There are many types of grid-connected inverter controllers, PI controller based is the most popular methods. But, a common PI control is produced zero-steady state error and phase delay in sinusoidal reference. Synchronous reference frame or DQ transform based controller is capable for reducing both of zero-steady state error and phase delay is. But DQ transform based controller has cross-coupling component which difficult to analyze the system in single phase model. In this paper, to obtained single phase model of the system, DQ transform based controller is analyzed in two techniques. The first is by neglecting cross-coupling. The second is eliminated cross-coupling component by decoupling method. By these two techniques, single phase model is obtained. Then, the single phase model is analyzed to evaluate its performance in stability and frequency response, through Root Locus and Bode diagram, respectively. MATLAB and PSIM simulation is used to verify the analysis. Simulation result is shown; cross-coupling component has no significant influent to the controller.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1601-1605
• /
• 2012

Three-phase voltage and current is applied to the three-phase alternating current motors which are commonly used in industry. Three phase variables of a, b, c are converted into d, q, 0 axis and the AC machines are modeled and analyzed. Basically the coordinate transformation or d-q transformation is used for convenience, a few steps are needed to analyze the motor performances - separating d and q components, establishing each equivalent circuit, and solving the differential equations of the circuits. In this study, a modeling technique of induction motor using complex vector is proposed and it can explain the induction motor physically. This method does not need the separating process of d and q components. With this technique, the model becomes simple, is easy to understand in physical, and can get the same results with those from the other models. These simulation results of the proposed model are compared with them for the conformation of the proposed method.

• 한국태양에너지학회 논문집
• /
• 제28권6호
• /
• pp.15-23
• /
• 2008

The article deals with system technology of a new solar heating system which systematically combines exiting solar collector technology, auxiliary electrical water heating, floor heating system and well insulated construction method and its application of this system to apartment house heating system in the cold region, and also analyzed performance of the new system in terms of technical and economic feasibility. Results shows that energy efficiency approaches up to 50% of the energy consumption of local construction from 1980 to 1981. The implementation of "DQ technology" to floor heating system achieved from 79% to 85% of the energy-saving benefits comparing to other housing units which were supplied by the local district heating plant.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.265-270
• /
• 2022

본 논문에서는 정지 좌표계 dq-축 전류를 기반으로 하는 비대칭 6상 PMSM의 스위치 개방 고장 검출 알고리즘을 제안한다. 본 논문에서의 해당 모터는 2개의 3상 권선이 30°의 전기적 위상차를 갖고 중성점이 분리된 비대칭 구조를 갖는다. 따라서 듀얼 3상 PWM 인버터와 스위치 개방 고장으로 인한 검출기법이 반드시 필요하다. 본 논문에서는 비대칭 6상 PMSM을 구동하기 위해 듀얼 dq축 전류 제어 방식을 사용하며 전역 통과 필터와 저역 통과 필터를 사용해 전류 변동을 감지하여 개방 고장이 발생한 스위치를 검출하는 방식을 제안한다. 제안한 방법의 효과와 유용성은 여러 실험을 통해 검증하였다.

• 전력전자학회논문지
• /
• 제20권5호
• /
• pp.429-436
• /
• 2015

Torque ripples generate mechanical vibration at low speed and acoustic noise at high speed. The back emf harmonics of a PM synchronous motor is one of the main sources of torque ripples. To reduce torque ripples resulting from back emf harmonics, dq-axis harmonic currents that reduce the torque ripples are generally compensated to the current controller. Harmonic current compensation is effective at low speed, but it is not applicable at high speed because of the limited bandwidth of the current controller. In this study, dq-axis harmonic voltage compensation that can reduce torque ripples at high speed is proposed. The dq-axis harmonic voltages are calculated from the motor speed and the dq-axis harmonic currents. The effectiveness of the proposed method in reducing torque ripple is verified by a simulation and experiments.