• 대한임베디드공학회논문지
• /
• 제15권6호
• /
• pp.289-297
• /
• 2020

Although flash disks are being used widely instead of hard disks, it is difficult to optimize for effective utilization of flash disks because overwrite in place is impossible and the power consumption and time required for read, write, and erase operations are all different. One of these optimization issues is a cache management strategy to minimize write operations. The cache operates at two levels: an operating system equipped with flash disks and a translation layer within the flash disk. Most studies deal with the operating system-level cache strategy. In this study, we implement and analyse the DPW-LRU algorithm which is one of the recently proposed operating system cache replacement algorithms to apply to FTL, and grope with some improvements. As a result of the experiment, the DPW-LRU algorithm maintained superiority even in the FTL environment, and showed better performance with a slight improvement.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권7호
• /
• pp.1138-1147
• /
• 2020

Objective: A study was made investigate factors affecting body surface temperature changes after weaning in sows, whether these can be used to aid detection of natural estrus and how they relate to subsequent reproductive performance. Methods: A total of 132 sows were selected during summer from a breeding farm, with mean parity of 3.6±2.3 and 28.5±0.9 days lactation length. Four daily measurements (6:00, 8:00, 16:00, and 18:00) of vulva (VST), udder (UST), ear base and central back skin temperatures for individual sows were taken by an infrared thermometer, continuing up to 8 days post weaning. Results: The VST obtained from sows showing estrus at 4 days post-weaning (4DPW), 5DPW, and 6DPW showed a peak at the fourth day post-weaning, but then started to decrease. The VST of sows not detected in standing heat (NDPW) remained at a lower level during the experiment, but UST was increased soon after weaning. The VST-UST temperature differences during daytime of sows that were showing behavioural standing heat on 4DPW, 5DPW, 6DPW, and 7DPW were 0.46℃±0.123℃, 0.71℃±0.124℃, 0.66℃ ±0.171℃, and 0.58℃±0.223℃, respectively. The NDPW sows had the highest UST observed, but also the lowest VST so that a more negative value of temperature difference (-0.31℃) was seen during first few days post-weaning. A total of 119 sows were observed to show standing heat and were bred. The later the estrus, the smaller the litter size (p = 0.005). Conclusion: Sows which did not show behavior indicative of stable standing heat after weaning had a VST which remained at a lower level, but the UST increased soon after weaning. Therefore, for sow heat detection under field conditions, the changes of VST and UST and difference between the two should be considered together to increase the accuracy of detection.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.387-389
• /
• 2003

Rational function model (RFM) is a universal sensor model for remote sensing image restitution. It is able to substitute for models of all known sensors. In this paper, RFM generation by CCD linear image models is described in detail. A principle of RFM-based 3D reconstruction and its implementation in JX4 DPW is also described. Experiments using IKONOS and SPOT5 images are carried out on JX4 DPW. Results show that RFM generated is feasible for photogrammetric restitution of CCD linear images.

• 대한공간정보학회지
• /
• 제23권4호
• /
• pp.3-10
• /
• 2015

최근 무인항공기(UAV : Unmaned Aerial Vehicle)는 신속하고 정확하게 3차원 공간정보를 구축하는 새로운 기술로 다양한 분야에서 연구와 활용이 증가하고 있다. 이러한 무인항공기는 위성측량이나 기존 항공측량에 비해 경제적이며 5cm급 이하의 고해상도 영상을 편리하게 취득할 수 있다는 장점을 지니고 있다. 따라서 본 논문에서는 무인항공기와 비측량용 디지털 카메라를 이용하여 3차원 공간정보의 제작 가능성과 기존 수치사진측량 시스템과의 호환성 분석을 위하여 무인항공기 전용 S/W 및 DPW(Digital Photogrammetry Workstation)를 이용해 성과품인 수치표고모델과 정사영상을 제작하고 정확도 분석을 수행하였다. UAV 전용 S/W와 DPW로 제작된 수치표고모델과 정사영상의 정확도 분석 결과 UAV 자료와 기존 수치사진측량 시스템과의 호환성은 낮은 것으로 판단된다.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.1-5
• /
• 2001

This paper presents an investigation into the operational comparison of SPOT triangulation to build GCP library by analytical plotter and DPW (digital photogrammetric workstation). GCP database derived from current SPOT images can be used to other image sensors of satellite, if any reasons, such as lack of topographic maps or GCPs. But, general formulation of a photogrammetric process for GCP measurement has to take care of the scene interpretation problem. There are two classical methods depending on whether an analytical plotter or DPW is being used. Regardless of the method used, the measurement of GCPs is the weakest point in the automation of photogrammetric orientation procedures. To make an operational comparison, five models of SPOT panchromatic images (level 1A) and negative films (level 1AP) were used. Ten images and film products were used for the five GRS areas. Photogrammetric measurements were carried out in a manual mode on P2 analytical plotter and LH Systems DPW770. We presented an approach for exterior orientation of SPOT images, which was based on the use of approximately eighty national geodetic control points as GCPs which located on the summit of the mountain. Using sixteen well-spaced geodetic control points per model, all segments consistently showed RMS error just below the pixel at the check points in analytical instrument. In the case of DPW, half of the ground controls could not found or distinguished exactly when we displayed the image on the computer monitor. Experiment results showed that the RMS errors with DPW test was fluctuated case by case. And the magnitudes of the errors were reached more than three pixels due to the lack of image interpretation capability. It showed that the geodetic control points is not suitable as the ground control points in DPW for modeling the SPOT image.

• 한국초지조사료학회지
• /
• 제8권3호
• /
• pp.169-174
• /
• 1988

An experiment was conducted to determine the feeding value of Arundinella hirat silage making by different methods ie., added starch 3%, formic acid 1% (FA), anhydrous ammonia ($NH_3$) 3%, and dried poultry waste (DPW) 3%. The samples were analyzed organic acid, cell wall constituent (NDF), cell contents (NDS), lignincutin-silica (ADL), hemicellulose (H: CHO) and in vitro dry matter digestibility (DMD) by pepsin-cellulase technique. The feeding value of silages were compared with corn siiage. The results are summarized as follows; 1.Formic acid treated to silage was lower pH(4.0), but anhydrous ammonia (8.37) and DPW added silage (8.72) were higher than that of the other treatment silages. 2.Fermentative quality of corn silage, starch, DPW, $NH_3$, control and FA treated silage were marked 100,81, 77,63,62 and 58, respectively. 3.Silage with $NH_3$, (23.57%) and DPW (10.42%) of content of protein were higher than that of other treated silages. 4.Silage with $NH_3$, was significantly lower contents of NDF, but did not ADF of among the treated silages. 5.In the contents of ADL, starch added silage was significantly decreased (p < 0.05), but did not the other treatment. 6.DMD of in vitro by pepsin-cellulase of silage with starch was increased three folds as equal to corn silage but did not increased the other treated silages. 7.Correlationship of latic acid an total acid, and NDS were a positive but lactic acid and NDF was a negative correlation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권11호
• /
• pp.3163-3181
• /
• 2023

Eavesdropping attacks have seriously threatened network security. Attackers could eavesdrop on target nodes and link to steal confidential data. In the traditional network architecture, the static routing path and the important nodes determined by the nature of network topology provide a great convenience for eavesdropping attacks. To resist monitoring attacks, this paper proposes a random routing mutation defense method based on dynamic path weight (DPW-RRM). It utilizes network centrality indicators to determine important nodes in the network topology and reduces the probability of important nodes in path selection, thereby distributing traffic to multiple communication paths, achieving the purpose of increasing the difficulty and cost of eavesdropping attacks. In addition, it dynamically adjusts the weight of the routing path through network state constraints to avoid link congestion and improve the availability of routing mutation. Experimental data shows that DPW-RRM could not only guarantee the normal algorithmic overhead, communication delay, and CPU load of the network, but also effectively resist eavesdropping attacks.

• 한국의학물리학회지:의학물리
• /
• 제10권2호
• /
• pp.73-81
• /
• 1999

단일광자방출촬영 (SPECT) 에 대한 산란보정은 영상질을 개선하고 영상을 정량분석하는데 중요한 역할을 한다. 본 연구의 목적은 몬테카를로 시뮬레이션을 이용하여 에너지 창을 이용한 세 가지 산란보정들에 대해 조사하는 것이었다. 몬테카를로 방법을 이용하여 Tc-99m에서 방출되는 광자의 history를 발생시키는 점선원과 Jaszack 팬텀에 대해 시뮬레이션하였다. 시뮬레이션을 위한 SPECT 시스템의 섬광체 NaI(T1) 는 두께 0.95 cm, 40 $\times$ 45 cm이었고, 조준기는 저에너지용 조준기를 사용하였다. 140 keV 에서 SPECT 에 대한 에너지 분해능은 9.8 %, 고유공간분해능은 0.32 cm 이었고, 화소크기는 0.3 $\times$ 0.3 $cm^2$이었다. 산란보정방법에는 컴프턴창을 이용한 방법 (CW), 세 개의 에너지창을 이용한 방법 (TW), 그리고 이중 광봉우리창을 이용한 방법 (DPW)을 사용하였다. DPW의 다항식 계수를 구하기 위해서 직경 20 cm인 팬텀안에서 깊이에 따라 점선원을 위치시켜 평면 영상을 얻었다. 에너지 창은 w1 = 92-125 keV, w2 = 124-126 keV, w3 = 126-140 keV, w4 = 140-154 keV, w5 = 154-156 keV으로 설정하였다. SPECT 투사영상은 360$^{\circ}$ 회전모드로 하여 120개를 얻었다. 회전반경은 15 cm이었다. 산란보정방법들은 삼중 에너지창을 이용한 방법은 cold sphere를 가진 Jaszack phantom 에서 참값에 가장 가까운 대조도를 주었고, hot sphere를 가진 Jaszack phantom에서 image recovery에 있어서 좋은 것으로 나타났다. 컴프턴 창을 이용한 방법은 대조도에 있어서 참값보다 과대평가되어 나타났고 이중 광봉우리창을 이용한 방법은 산란보정하기 전에 비해 대조 도는 좋아졌지만 참값에 비해 과소평가되어 나타났다. 조사된 세 가지 보정방법들은 개선된 영상 대조도를 보여주었다. 결론적으로, 산란보정에 대한 임상적용을 위해서는 SPECT 시스템에 실행하기 용이한 보정방법을 선택해하며, 정확한 정량분석을 위해서는 산란보정이 수행되어야 할 것이다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.786-791
• /
• 2002

Mapping systems using Satellite Imagery has not been well-established compare to conventional Arial Photograph mapping systems. In order for satellite imagery to produce a stable quality of maps, it requires to follow the standard mapping procedures. In this satellite imagery study, we proposed four methods of mapping procedures. Mapping methods were established by generating trial maps and analyzing types of input data and functions of DPW (Digital Photogrammetric Workstation). On quantitative aspect, accuracy of each steps were measured by increasing 2 GCPs each time from the minimum of 6 GCPs. In DLT, with the minimum of 10 points, RMSE is 2 pixels at most. Besides that, interpretation and stereoscopic plotting using KOMPSAT-1 imagery and other simulated imagery was performed. The tests resulted that, for KOMPSAT-1 (6.6m) stereoscopic images, the possibility of interpretation is 44.79% and possibility of stereoscopic plotting is 43.75%. In the other hand, for simulated imagery (1m), the possibility of interpretation is 60.92% and possibility of stereoscopic plotting is 55.18%.

• 핵의학기술
• /
• 제19권2호
• /
• pp.93-101
• /
• 2015

SPECT영상에서 산란계수는 정량적 계수오차와 영상품질 저하의 요인이다. 이에 다양한 산란보정(Scatter Correction, SC)방법이 연구되어 왔으며, 본 연구에서는 기존의 에너지창(Energy Window, EW) 기반 SC(EWSC)와의 비교로 SPECT/CT에서 사용되는 CT 기반 SC(CTSC)의 정확성을 평가하고자 한다. 중앙에 열소막대(hot rod, 74.0 MBq)를 설정한 Triple line insert 팬텀의 내부에 산란계수의 영향이 없는 기준영상의 획득을 위하여 공기를 채운 후 SPECT /CT영상을 획득하였고, 같은 조건에서 산란계수의 영향을 유도하기 위하여 공기대신 물을 채운 후 SPECT/CT영상을 각각 별도로 획득하였다. 두 조건 모두 Astonish(iterative : 4, subset : 16) 재구성 방법과 CT감쇠보정을 공통 적용하였고, 물을 채운 영상에 비산란보정(NSC), EWSC, CTSC 3가지 유형의 산란보정방법을 사용하였다. EWSC를 위하여 주(=peak) 에너지창(140 keV, 20%) 이외에 보조 에너지창 9개를 추가 설정한 후 영상을 동시 획득하였고, EWSC의 종류는 DPW(dual photopeak window) 10%, DEW (dual energy window)20%, TEW(triple energy window)10%, TEW5.0%, TEW2.5% 5가지를 사용하였다. 일차(primary)계수의 변동이 없는 조건하에, 두 조건의 영상에 VOI를 그려 총계수를 측정한 후 총계수 중 산란계수의 비를 %SF(percent scatter fraction)로 구하고, 공기를 채운 영상을 기준으로 물을 채운 영상과의 계수차이를 %NMSE (per cent normalized mean-square error)로 평가하였다. 공기를 채운 영상을 기준으로 각 산란보정방법이 적용된 물을 채운 영상의 %SF는 NSC 37.44, DPW 27.41, DEW 21.84, TEW10% 19.60, TEW5% 17.02, TEW2.5% 14.68, CTSC 5.57로 CTSC에서 제거된 산란계수가 가장 많았으며, %NMSE는 NSC 35.80, DPW 14.28, DEW 7.81, TEW10% 5.94, TEW5% 4.21, TEW2.5% 2.96, CTSC 0.35로 CTSC에서 가장 낮게 나타났다. SPECT/CT영상에서 실험에 사용된 각 산란보정 방법의 적용은 산란계수의 영향으로 발생된 정량적 계수오차를 개선시킬 수 있었다. 특히, CTSC의 경우 기존의 EWSC방법들과 비교하여 가장 낮은 %NMSE (=0.35)를 보여 비교적 정확한 산란보정이 가능하였다.