• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.365-372
• /
• 2004

The laser welding and its analysis were carried out using high power 6kW $CO_2$ laser for high strength steels such as DP, TRIP and conventional high strength steels. Bead on plate welding of thin sheet was examined to investigate the effect of weld variables of laser welding, and to obtain optimum welding condition. In order to investigate the formability of welded high strength steels, LDH test was added on this work. At high welding speed, the partial penetration was obtained by low heat input. Meanwhile, porosity was formed in the bead at low weld speed because of extremely higher heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. It was shown that the DP steels had lower porosity level and smooth bead shape, therefore better laser weldability than TRIP steels and conventional high strength steels. In addition, LDH test shows that the welded DP steels have about $90\%$ formability value of base metal, although TRIP steel and conventional high strength steels have about $80\%$ formability value of its base metal.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.3
• /
• pp.231-242
• /
• 1990

A study is reported which investigated the additive nature of digestible energy (DE) from dietary nutrients and to estimate the relative energy values of different energy-yielding nutrients in practical trout diets. A growth study was conducted over 12 weeks with 6 diets. Rainbow trout (Oncorhynchus mykiss) were fed diets once a day ad libitum. Digestible energy values determined and calculated had direct relationship indicating additive nature of such values for feed ingredients. Overall growth performance was best in a diet containing 33% digestible protein (DP) with a DP/DE ratio of 18.6. A reduction in digestible protein level with the same DP/DE rat io led to a significant decrease in growth and feed efficiency. The increase of 7% of lipid with concomitant decrease in protein resulted in the relative gain of 130% in growth and nutrient retention, suggesting that 1 g of lipid is equal to about 1.3 g of proteins in terms of net energetic value. Replacement of 10% of dietary lipid by carbohydrates led to a slight decrease in energy retention efficiency but to a great increase in lipid retention efficiency (130%) showing that dietary carbohydrates led to increased lipogenesis.

• Korean Journal of Poultry Science
• /
• v.40 no.4
• /
• pp.315-325
• /
• 2013

In this study, the effects of Doenjang powder (DP : Korean traditional fermented soy bean paste) addition on the quality and shelf-life of chicken sausages during storage were evaluated. The chicken sausages were manufactured with 60% of chicken breast meat, 20% of chicken skin and other ingredients. The sausages were divided into four treatments according to DP addition level such as 0, 2, 5 and 8%. The sausages were vacuum packed and stored at a refrigerator ($5^{\circ}C$) for 4 weeks. pH of sausage was in creased with DP addition after 2 weeks storage (p<0.05). The addition of 2% and 5% DP decreased the lipid oxidation (TBARS) value (p<0.05) and addition of 8% DP seemed to promote the protein deterioration (VBN) over the storage (p<0.05). In the instrumental color, the chicken sausages with 5% and 8% DP showed higher redness and lower lightness value than sausage with 0 and 2% DP (p<0.05) over the storage. The hardness and gumminess of chicken sausages added with 5% DP were significantly lower than those of other treatments during the storage (p<0.05). The addition of DP detained the growth of aerobic and anaerobic bacteria counts after 2 week of storage (p<0.05), but no significant difference was found by DP addition level (p>0.05). In conclusion, 5% DP could be used as ingredient of chicken sausage to enhance sensory quality and retard lipid oxidation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.4
• /
• pp.315-324
• /
• 2000

This paper presents an efficient dynamic programming(DP) method, so called EDPAS (Efficient Dynamic Programming Algorithm for Signal), for optimally controlling traffic signal in real-time mode at a single intersection. The objective of EDPAS is to minimize total vehicle delay. It applies reaching method to solve forward DP functional equation, which does not need any priori knowledge on the states of DP network. Two acceleration techniques within reaching method are the main feature of EDPAS. They are devised to eliminate inferior DP states by comparing between states and maintaining incumbent value, resulting in a great amount of computational efficiency. An example is shown to verify the advantage of EDPAS.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1114-1123
• /
• 2015

Bushing is the key link to connect outer and inner insulating systems and also the essential electric accessory in electric power system, especially in the high voltage engineering (AC 1000kV, DC 800kV). This paper presented the experimental research of thermal aging characteristic of oil-paper insulation used in bushing. A thermally accelerated aging experiment at 90℃ was performed. The bushing models containing five layers of paper were sealed into the aging vessels and further aged for 250 days. Then several important parameters associated with the aging were observed and evaluated. The results showed that the degree of polymerization (DP) of papers gradually decreased. The DP values of outermost layer and middle layer fit well into the second-order kinematic model and first-order kinematic model, respectively. Less deterioration speed of the inter-layer paper than outer layer was confirmed by the variation of DP. Hydrolysis was considered as the main cause to this phenomenon. In addition, the logarithm of the furfural concentrations in insulation oil was found to have good linear relationship with DP of papers. Interestingly, when the aging time is about 250 days and DP is 419, the aging process reaches an inflection point at which the DP approaches the leveling off degree of polymerization (LODP) value. Both tanδ and acid number of oils increased, while surface and volume resistivity of papers decreased. The obtained results demonstrated that thermal aging and moisture absorbed in papers brought great influence to the degradation of insulating paper, leading to rapid decrease of DP and increase of the tanδ. Thus, the bushing should be avoided from damp and real-time monitoring to the variation of tanδ and DP values of paper is an effective way to evaluate the insulation status of bushing.

• Journal of Veterinary Clinics
• /
• v.18 no.4
• /
• pp.402-410
• /
• 2001

This study was performed to investigate the hemodynamic changes which occur after occlusion of coronary artery and relation to reperfusion arrhythmias(RA) which occur when occlusion materials were removed form coronary artery in dogs. The occlusion of coronary artery was designed by temporary ligation of left circumflex branch of coronary artery during 30 minutes in 16 dogs. During occlusion of coronary artery, cardiac output(CO), mean aortic pressure (mAP), aortic systolic pressure(ASP), aortic diastolic pressure(ADP). left ventricular systolic pressure(LVSP), left ventricular maximum dp/dt (LV max. dp/dt) and left ventricular end-diastolic pressure (LVEDP) were measured. The occurrence of RA were observed for 5 minute after reperfusion by explained of ligation. As a results, cardiac arrest occurred in 4 dogs during occlusion of coronary artery, and RA was not observed in 5 dogs while it was seen in 5 dogs when explained ligation(reperfusion) after 30 minutes, the rest 2 dogs occurred temporary tachycardia. In hemodynamics changes, LVSP decreased by 10.9% and LV max. dp/dt by 5.4 % in comparison to control value which not ligated coronary artery, and LVEDP increased by 73.3%. The CO/min and mAP also decreased by 10.7% and by 11.3% expectedly. In the relationship to occurrence RA and hemodynamics changes, the LVSP and LV max. dp/dt at the time of occlusion in the RA group decreased by 11.9% and 0.8% in comarison to the control value while the decrease was 7.7% and 10% in the non-RA group. But the LVEDP in creased by 109.1% in the RA group while the decreased was 44.6% in the non-RA group. Referring CO/min, the drop was 8.8% in the RA occurrence group and 12.9% in the non-occurence group. These parameters of LVEDP, LV max. dp/dt, and CO were significant difference(p<0.05). The mAP also decreased by 11.9 in the RA group and by 9.8% in the non-RA group, but these defference were not the significant difference.

• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.581-586
• /
• 2011

This study describes a hydrogen embrittlement evaluation of the subsurface zone in 590DP steel by micro-Vickers hardness measurement. The 590DP steel was designed to use in high-strength thin steel sheets as automotive materials. The test specimens were fabricated to 5 series varying the chemical composition through the process of casting and rolling. Electrochemical hydrogen charging was conducted on each specimen with varying current densities and charging times. The relationship between the embrittlement and hydrogen charging conditions was established by investigating the metallography. The micro-Vickers hardness was measured to evaluate the hydrogen embrittlement of the subsurface zone in addition to the microscopic investigation. The micro-Vickers hardness increased with the charging time at the surface. However, the changing ratio and maximum variation of hardness with depth were nearly the same value for each test specimen under the current density of 150 mA/$cm^2$ and charging time of 50 hours. Consequently, it appears that hydrogen embrittlement in 590DP steel can be evaluated by micro-Vickers hardness measurement.

• Journal of Technologic Dentistry
• /
• v.44 no.4
• /
• pp.126-131
• /
• 2022

Purpose: The purpose of this study is to evaluate the quality of dental fixed prostheses fabricated by 3DP (three-dimensional printing). Methods: Ten main models were prepared for the study. Ten specimens were printed by 3DP (3DP group). Ten specimens were fabricated by the lost wax technique and casting method to complete the control group (LWC group). The marginal fit was measured for 20 specimens. The measurement of marginal fit was performed using the silicon replica technique. Finally, the marginal fit of 10 specimens from each group was calculated. An independent sample t-test was run to see if the calculated averages for the two groups were mutually significant (α=0.05). Results: According to the experimental results, the mean marginal fit of the 3DP group was 71.9 ㎛, and the LWC group was 55.3 ㎛. The means of the two groups were found to be significantly different (p<0.001) in the results of the independent sample t-test. Conclusion: The marginal fit of fixed dental prostheses produced by 3DP technology was examined with values greater than those fabricated by traditional technology. However, as it appeared to be a value within the range of clinically acceptable range recommended by numerous studies, it was determined that clinical application would be feasible.

• ETRI Journal
• /
• v.42 no.4
• /
• pp.619-632
• /
• 2020

Highly dispersive S-boxes are desirable in cryptosystems as nonlinear confusion sublayers for resisting modern attacks. For a near optimal cryptosystem resistant to modern cryptanalysis, a highly nonlinear and low differential probability (DP) value is required. We propose a method based on a piecewise linear chaotic map (PWLCM) with optimization conditions. Thus, the linear propagation of information in a cryptosystem appearing as a high DP during differential cryptanalysis of an S-box is minimized. While mapping from the chaotic trajectory to integer domain, a randomness test is performed that justifies the nonlinear behavior of the highly dispersive and nonlinear chaotic S-box. The proposed scheme is vetted using well-established cryptographic performance criteria. The proposed S-box meets the cryptographic performance criteria and further minimizes the differential propagation justified by the low DP value. The suitability of the proposed S-box is also tested using an image encryption algorithm. Results show that the proposed S-box as a confusion component entails a high level of security and improves resistance against all known attacks.

• Analytical Science and Technology
• /
• v.17 no.4
• /
• pp.315-321
• /
• 2004

The aim of this study was to investigate the evidential value of blue and black ballpoint pens on paper by nondestructive techniques. In this work, 21 blue and 22 black ballpoint pens which were purchased on different brands were analyzed by Raman Spectroscopy and Video Spectral Comparator (VSC). Surface-Enhanced Resonance Raman Spectroscopy (SERRS) with excitation at 685 nm and VSC with several spot light filters were used for the discrimination of ballpoint pen inks. In the SERR spectra, the ballpoint pen inks on paper could be shown sharp spectral bands and distinguished by their band shapes and relative intensities. In the blue and black ballpoint pen inks, the discriminating powers (DP) by SERRS were 0.85 and 0.67 and the DP by VSC were 0.88 and 0.90, respectively. The DP by combined sequence of techniques was all 0.97 in both black and blue ballpoint pen inks.