• Solar Energy
• /
• v.6 no.2
• /
• pp.3-14
• /
• 1986

It is desirable to collect the solar thermal energy at relatively high temperature in order to minimize the size of thermal storage system and to enlarge the scope of solar thermal energy utilization. In this study, to develop a solar collector that has both advantages of collecting solar thermal energy at high temperature and fixing conveniently the collector system for long term period, a cylindrical parabolique concentrating solar collector (M.C.P.C.S.C) was designed, which has several rows of parabolique reflectors and thin thickness such as the flat-plate solar collector, maintaining the optical form of concentrating solar collector. The thermal performance of the M.C.P.C.S.C. newly designed in this study was analysed theoretically and experimentally. The results are summarized as follows: 1) prediction equation for outlet temperature, $T_o$, of heat transfer fluid and for the thermal efficiency, ${\eta}$, of the collector were derived as; o $$T_o=[C+B1_n(\frac{I_c(t)}{pv^3})]T_i$$ o $${\eta}=\frac{A}{A_c}\dot{m}[(C-1)+B1_n(E{\cdot}di^6\frac{I_c(t)}{\dot{m}^3})]\frac{T_i}{I_c(t)}$$ 2) When the insolation on the tilted solar collector surface, $I_c$, was $900-950W/m^2$ and the heat transfer fluid was not circulated in tubular absorber, the maximum temperature on the absorber surface was $100-118^{\circ}C$, this result suggested that the heat transfer fluid could be heated up to $98-116^{\circ}C$. The maximum temperature on the absorber surface was decreased with the increase of the collector shape factor, $L_p/L_w$ 3) There was a good agreement between the experimental and theoretical value of solar collector efficiency, ${\eta}$, which was proportional to the collector shape factor, $L_p/L_w$ 4) It is desirable to continue the study on the relationship between the collector shape factor, $L_p/L_w$, and the thermal efficiency of solar collector.

• Journal of Technologic Dentistry
• /
• v.35 no.2
• /
• pp.137-142
• /
• 2013

Purpose: This study was to observe the surface and interfacial characteristic of Zirconia by surface treatment. And it was observed the roughness and contact angle according to processing, and the interfacial properties by surface treatment on zirconia. Methods: The oxide formation and ion diffusion between core and veneer ceramic were determined by the X-ray Dot Mapping of EPMA(Electron probe micro analyzer). The roughness was measured by 3D Digital microscope and the contact angle according to processing of zirconia was observed using distilled water on the surface. Results: The surface roughness of the specimens Z04, Z12, Z15 was measured $0.67({\pm}0.03){\mu}m$, $0.50({\pm}0.12){\mu}m$, $0.35({\pm}0.09){\mu}m$, respectively. As results of contact angle test, Z04, Z12, Z15 of specimen group without binder treatment was measured $46.79({\pm}3.17)^{\circ}$, $57.47({\pm}4.83)^{\circ}$, $56.19({\pm}2.66)^{\circ}$, respectively. but, L04, L12, L15 of specimen group without binder treatment was measured $63.84({\pm}2.20)^{\circ}$, $66.08({\pm}0.16)^{\circ}$, $65.10({\pm}1.01)^{\circ}$, respectively. Average contact angle of L15 was measured $65.10({\pm}1.01)^{\circ}$. In X-ray Dot Mapping results, thickness of binder including Al element was measured that each of L04, L12, L15 were $20{\mu}m$, $15{\mu}m$, $10{\mu}m$. Conclusion: The more rough surface increases the wettability, but the sintered exclusive binder decreases the wettability.

• Communications of the Korean Mathematical Society
• /
• v.28 no.2
• /
• pp.231-241
• /
• 2013

On the framework of the 2-adic group $\mathcal{Z}_2$, we study a Sobolev-like inequality where we estimate the $L^2$ norm by a geometric mean of the BV norm and the $\dot{B}_{\infty}^{-1,{\infty}}$ norm. We first show, using the special topological properties of the $p$-adic groups, that the set of functions of bounded variations BV can be identified to the Besov space ˙$\dot{B}_1^{1,{\infty}}$. This identification lead us to the construction of a counterexample to the improved Sobolev inequality.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.7-13
• /
• 2011

[ $L1_0$ ]phase FePd nano-dot structures were successfully fabricated on self-organized Fe/Au bilayers. With atomic force microscopy, it is determined that surface morphologies of initially flat Fe/Au bilayer films were agglomerated and transformed their shape into nano-dots structures with increasing annealing temperature. With this bilayer as a template, FePd multilayers were deposited at various temperatures, i.e. $300^{\circ}C$, $350^{\circ}C$, $400^{\circ}C$, and $450^{\circ}C$. Surface morphologies of FePd superlattice had a near resemblance to self-organized bilayer. According to X-ray diffraction results, it is confirmed that $L1_0$ superlattice structures of FePd were obtained from samples which were annealed above $350^{\circ}C$. Results of X-ray photoelectron spectroscopy depth-profile analysis showed that chemical composition is identical to deposition sequence. As a result, without additional etching processes, fabrication of chemically ordered FePd superlattice nano-dots was achieved.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.2
• /
• pp.95-98
• /
• 1998

Hypocotyl explants of flowering cabbage were cocultured with Agrobacterium tumefaciens LBA4404;;pGA875 harboring proteinase inhibitor II(PI-II) cDNA and then regenerated into plants. Sucessful transcripts of PI-II gene were detected by RNA dot blot analysis. Bioassay was conducted on transgenic flowering cabbage. It was confirmed that insecticidal activities of transformants were much higer than that of control plants. In progeny test of hansformants, 27.4% of T$_1$ seeds was resistant on MS medium containing 20 mg/L kanamycin.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.284-290
• /
• 1999

Glucose fed-batch culture was studied to improve cellulose productivity by Acetobacter xylinum BRC5. When initial glucose concentrations in batch cultures were less than 20 g/L, yield coefficients of cellulose (Yp/s) remained a constant value of 0.21 g cellulose/g glucose. But a low yield coefficient, Yp/s=0.13 was obtained from an initial glucose concentration of 40 g/L. Since initial high glucose concentrations in batch culture resulted in low yields of cellulose, constant fed-batch cultures were carried out. The optimal feed rate for fed-batch culture was 2.22 g glucose/L.h. In constant fed-batch culture without DO control, 10 g/L of cellulose was obtained from 40 g/L of glucose with this feed rate, which was approximately two fold higher than that of the batch culture with the same initial glucose concentration. In DO stat plus fed-batch culture, the highest cellulose productivity could be obtained when dissolved oxygen level was controlled at 10% of air saturation, and cellulose productivity increased about 1.5 times compared with that of the culture without DO control.

• Communications of the Korean Mathematical Society
• /
• v.37 no.3
• /
• pp.693-703
• /
• 2022

In this paper, we are concerned with the existence of infinitely many fast homoclinic solutions for the following damped vibration system $$(1){\hspace{32}}{\ddot{u}}(t)+q(t){\dot{u}}(t)-L(t)u(t)+{\nabla}W(t,u(t))=0,\;{\forall}t{\in}{\mathbb{R}},$$ where q ∈ C(ℝ, ℝ), L ∈ C(ℝ, ${\mathbb{R}}^{N^2}$) is a symmetric and positive definite matix-valued function and W ∈ C¹(ℝ×ℝ^N, ℝ). The novelty of this paper is that, assuming that L is bounded from below unnecessarily coercive at infinity, and W is only locally defined near the origin with respect to the second variable, we show that (1) possesses infinitely many homoclinic solutions via a variant symmetric mountain pass theorem.

• Microbiology and Biotechnology Letters
• /
• v.47 no.3
• /
• pp.449-458
• /
• 2019

Hepatitis B treatments using immune therapy are gaining interest because of the improvements in dendritic cell performance for antigen presentation, which induces an appropriate immune response and raises patient survival rates. This research aims to produce a significant amount of the HBcAg antigen, which can induce an immune response and have a curative effect on HBV infection. In this study, the HBV subgenotype B3 of the HBcAg gene was used, which is dominant in Indonesia. Further, Lactococcus lactis bacteria was used as the host because of its safety and tightly regulated protein expression. The codon usage for the HBcAg gene was optimized to improve protein expression in L. lactis, which is important because a codon is not random between species. The HBcAg gene is attached to a pNZ8148 plasmid and transformed into the L. lactis NZ3900 expression host. The results confirm that a positive protein band (21 kDa) in two fractions of purified HBcAg was recognized by both western blotting and dot blot hybridization, even if the HBcAg optimized codon has higher GC contents than that suggested for L. lactis expression. Overall, this research strengthens the broad use of L. lactis bacteria for any protein expression, including higher protein expression of codon optimized HBcAg gene compared to non-optimized genes. Furthermore, the improvement in the codon optimization of the HBcAg gene significantly increases the total protein expression by 10-20%, and the expression level of the codon optimized HBcAg increases 1.5 to 3.2-times that of the native HBcAg.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.242-242
• /
• 2017

A potato cultivar, Haryeong, was released for table stock in 2005 and has been supplied to farmers since 2010. Black dot has been known as a disease causing tuber blemishes in the cultivar, which is primarily an issue in storage. To investigate the effect of curing periods on disease occurrence, four periods (1, 3, 6 and 9 weeks) of curing were applied on Haryeong tubers harvested from the highlands (800 m a.s.l) in September. Tubers were stored at $2-3^{\circ}C$ and 80-90% RH for 6-7 months and were visually checked for disease occurrence. Tuber infection was characterized by barely visible small black spots on tubers and dark sooty lesions in stolon end of tubers. Another symptoms were observed on the upper surface of tubers which showed irregular, small to large, and depressed areas of brown to blackish skin with necrotic lesions inside. Results showed decrease in black dot depending on the curing period that ranges 18-48, 3-35, 0-14 and 0-3% at 1, 3, 6 and 9 weeks curing, respectively. During the storage, however, percentage weight loss of tubers and percentage of tubers with sprouts increased slightly with increasing the curing period from 1-3 to 6-9 weeks.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.217-236
• /
• 1979

The author's theory for plastic deformation was applied to superplastic alloys (Zn-Al eutectoid, Al-Cu, Pb-Sn, Sn-Bi, Mg-Al eutectics). The plastic deformation of the superplastic alloys could be described by two Maxwell models connected in parallel which represent two grain boundary flow units. The flow units are characterized by the two parameters $X_{gj}/{\alpha}_{gj}\;and\;{\beta}_{gj}$ (j=l or 2, g signifies the grain boundary) the values of which were obtained by applying our flow equation [Eq. (5)] to experiment. We confirmed that our flow equation describes the superplasticity very well. The curve of strain rate sensitivity m (=${\partial}\;In\;f/{\partial}\;In\;\dot{s})\;vs.\;-In\dot{s}$, where f and s are stress and strain rate, respectively, showed two peaks corresponding to flow unit gl and g2, the separation of the two peaks is determined by the difference between ${\beta}_{g1}\;and\;{\beta}_{g2}$. The condition of superplasticity is also determined by ${\beta}_{gj}$, which satisfies $\dot{s}_{mj}{\leqslant}1.53}{\beta}_{gj}$ [Eq.(13)], where $\dot{s}_{mj}$ is the s of the jth unit at the peak. The grain size dependence of ${\beta}_{gj}$ is described by $ln({\beta}_{gj})^{-1}$=alnx+b [Eq. (16)], where x is the grain size, and a and b are constants. The activation enthalpy for each flow unit, ${\Delta}H_{gj}^{\neq}$ was also determined from the temperature dependence of ${\beta}_{gj}$ which is proportional to the relaxation time of the j th unit. Since the superplasticity is determined by Eq. (13), and since ${\beta}_{gj}$ and ${\Delta}H_{gj}^{\neq}$ are related, we obtained the conclusion that superplasticity occurs in the system having small ${\Delta}H_{gj}^{\neq}$ values. The Aej values were equal to the activation enthalpies of grain boundary self-diffusion of the component atoms of the alloys, this accords with our proposed flow mechanism. The ${\Delta}H_{gj}^{\neq}$ value increases with grain size as expected from Eq. (16).