• 물과 미래
• /
• 제36권1호
• /
• pp.124-128
• /
• 2003

• 전자공학회논문지A
• /
• 제32A권7호
• /
• pp.115-122
• /
• 1995

This paper presents the simulation environment that verifies whether a new microprocessor described with HDL is compatible with MS-DOS. The phrase 'compatible with MS-DOS' means that the microprocessor can execute MS-DOS without any modification of MS-DOS's binary code. The proposed verification environment consists of HDL simulator and user interface module. And the communications between them are performed by using sockets which UNIXprovide. The HDL simulator is equipped with several functions, which use PLI to emulate ROM-BIOS facilities. The ROM-BIOS emulation routine is described by using these functions. User interface module utilizes S/MOTIF and participates in emulating PC monitor and keyboard. The verification environment is tested by executing the MS-DOS commands (DIR, FORMAT, DATE, TIME etc.) with the HDL model of microprocessor, and the display of user interface module verifies that the environment works correctly. In this paper, the method of constructing the verification environment is presented, and the simulation results are summarized.

• 한국물환경학회지
• /
• 제33권1호
• /
• pp.70-77
• /
• 2017

Total Pollution Load Control (TPLC) is a system for managing the discharge load assigned by satisfying the Target Water Quality (TWQ) in Standard Flow Conditions (SFC). TWQ for a between Metropolitan Cities/Dos Specified (Cites/Dos TWQ) is very important to be the basis of each Unit Watershed TWQ. The purpose of this study was to establish a rational and scientific 'Calculation Metohd of Cites/Dos TWQ'. A methodology for the 3rd phase 'Cites/Dos TWQ' was proposed in this study based on review of the past phase (1rd and 2rd) 'Cites/Dos TWQ' in nakdong river. And utilized water quality model to estimate 3rd phase 'Cites/Dos TWQ' The allocation method of individual discharge sources are important for estimating 'Cites/Dos TWQ' In this case, the key point of the method of calculating the total allowable individual sources is the balance of the equity and the efficiency between individual sources of reduced pollutants. Thus, water quality shall be determined with regard to the current emission levels, the reduction capacity and the technical possibilities of individual sources. We estimate 3rd phase 'Cites/Dos TWQ' according to the 'Calculation Method of Cites/Dos TWQ'.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.43-47
• /
• 2013

In this work, we report extraction of the density-of-states (DOS) in polymer-based organic thin film transistors through the multi-frequency C-V spectroscopy. Extracted DOS is implemented into a TCAD simulator and obtained a consistent output curves with non-linear characteristics considering the contact resistance effect. We employed a Schottky contact model for the source and drain to fully reproduce a strong nonlinearity with proper physical mechanisms in the output characteristics even under a very small drain biases. For experimental verification of the model and extracted DOS, 2 different OTFTs (P3HT and PQT-12) are employed. By controlling the Schottky contact model parameters in the TCAD simulator, we accurately reproduced the nonlinearity in the output characteristics of OTFT.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.228-233
• /
• 2016

Auxetic material is a material which has negative Poisson's ratio(NPR). Auxetic material shows some distinctive property like high energy absorbing property and high shear modulus. Among these, synclastic curvature is very interesting characteristic. When synclastic-curvature-material bends, it changes its shape like dome, contrary to non-auxetic material which changes its shape like saddle(anticlastic). This distinctive property could make it easy to manufacture curved structure like nose cone or wing panel in aerospace engineering. In this study, we studied a quantitative analysis about synclastic curvature of re-entrant panel with finite element model. We suggested a concept 'Degree of Synclasticity(DOS)', which means a ratio of curvature of load-direction and load-orthogonal direction. We studied the variation of DOS with two factor, unit cell inner angle(${\theta}$) and load position angle(${\phi}$). DOS decreases as ${\theta}$ increases because the unit cell goes out of auxetic-shape. As ${\phi}$ varies, DOS changes in a large range. So proper optimization of ${\phi}$ would be needed for application.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권3호
• /
• pp.153-161
• /
• 2011

In this work, we report the physics-based SPICE model of amorphous oxide semiconductor (AOS) thin-film transistors (TFTs) and demonstrate the SPICE simulation of amorphous InGaZnO (a-IGZO) TFT inverter by using Verilog-A. As key physical parameter, subgap density-of-states (DOS) is extracted and used for calculating the electric potential, carrier density, and mobility along the depth direction of active thin-film. It is confirmed that the proposed DOS-based SPICE model can successfully reproduce the voltage transfer characteristic of a-IGZO inverter as well as the measured I-V characteristics of a-IGZO TFTs within the average error of 6% at $V_{DD}$=20 V.

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.417-425
• /
• 2008

An image-based atmospheric correction software ATC is implemented using MATLAB and SML (Spatial Modeler Language in ERDAS IMAGINE), and it was tested using Landsat TM/ETM+ data. This ATC has two main functional modules, which are composed of a semiautomatic type and an automatic type. The semi-automatic functional module includes the Julian day (JD), Earth-Sun distance (ESD), solar zenith angle (SZA) and path radiance (PR), which are programmed as individual small functions. For the automatic functional module, these parameters are computed by using the header file of Landsat TM/ETM+. Three atmospheric correction algorithms are included: The apparent reflectance model (AR), one-percent dark object subtraction technique (DOS), and cosine approximation model (COST). The ACT is efficient as well as easy to use in a system with MATLAB and SML.

• 한국ITS학회 논문지
• /
• 제6권3호
• /
• pp.12-23
• /
• 2007

본 연구의 목적은 현행 버스 배차 간격 설정 시스템의 문제점을 제시하고, 이용자의 만족도와 버스 회사의 운영 효율성을 동시에 높일 수 있도록 이용자 만족도를 반영한 최적의 버스 배차 간격 설정 모형의 개발에 있다. 본 연구에서는 기존의 버스 운영비용, 승객 대기시간 비용 및 승객 통행시간 비용의 합으로 총 교통비용을 최소화하는 기존 모형에 이용자 만족도를 반영하여 최적 버스 배차 간격 설정 모형을 개발하였다. 본 연구는 최적 배차 간격 설정을 위해 선형계획법을 사용하였고, 이를 위해 선형계획법을 기반한 LINGO 프로그램을 사용하였다. 또한 부산의 일반 사례를 총 교통비용을 최소화하는 기존의 모형 및 현행 버스 배차간격 설정 시스템과 개발한 모형에 각각 적용하여 총 교통비용의 차이를 비교하였다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제56차 하계학술대회논문집 25권2호
• /
• pp.297-300
• /
• 2017

본 연구는 기술수용모델(Technology Acceptance Model)을 기반으로 <클림트 인사이드(2017)>전시에서 사용된 <스토클렛 저택의 장식벽화(Stoclet Frieze)> VR 앱에 대한 인지된 유용성(이하 PU)과 인지된 이용용이성(이하 PEOU)의 평가에 초점을 맞추었다. VR 앱의 학습적합성(SFL)이 감상적합성(SFA)보다 높게 평가된 PU의 경우, 학습유용성(UFL)과 감상유용성(UFA)의 모든 요인이 만족도(DOS)에 긍정적인 영향을 미침으로써, 전시환경에서의 VR 앱의 학습에 대한 내적 동기 부여 및 감상 지원에 대한 잠재력이 확인되었다. 또한 PEOU의 모든 요인들은 DOS뿐만 아니라 DOI와도 유의미한 상관관계를 가졌다. 본 연구를 통해 TAM의 PU와 PEOU의 ATUA(DOS 및 DOI) 및 BITUA(ITRA(1) 및 ITRA(2))에 대한 영향력이 검증됨에 따라, 두 변수는 사용자의 VR 앱에 대한 기술 수용에 대한 예측을 가능케 했으며, 결론적으로 예술작품 원작을 재매개한 VR 앱에 대한 평가모델로써 TAM의 적합성이 입증되었다.

• Geomechanics and Engineering
• /
• 제19권2호
• /
• pp.179-191
• /
• 2019

Based on the effective stress principle, a new formula for shear strength of unsaturated soil is derived under the general nonlinear Mohr-Coulomb (M-C) strength criterion to improve the classical strength criterion of unsaturated soil. Meanwhile, the simple irrigation model under steady seepage is adopted to obtain the distribution of the matrix suction or the degree of saturation (DOS) above the groundwater table in the slope. Then, combined with the improved strength criterion of unsaturated soil and the simple irrigation model under steady seepage, the limit equilibrium (LE) solutions for the unsaturated slope stability are established according to the global LE conditions of the entire sliding body with assumption of the stresses on the slip surface. Compared to the classical strength criterion of unsaturated soil, not only the cohesion soil but also the internal friction angle is affected by the matric suction or the DOS in the improved strength criterion. Moreover, the internal friction angle related to the matric suction has the nonlinear characteristics, particularly for a small of the matric suction. Thereafter, the feasibility of the present method is verified by comparison and analysis on some slope examples. Furthermore, stability charts are also drawn to quickly analyze the unsaturated slope stability.