• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.70-75
• /
• 2018

In this paper, we have studied the deformation problem of the scaffold caused by the FDM type 3D printer. The DOE (Design of experiment) and 3SC was used to solve the deformation problem of the scaffold generated from the adhesion surface between the scaffold and the bed. The methodology was used to derive the solution and the experiment was conducted on the derived solution. As a result of evaluating the experimental results obtained for the solution, it was found that the deformation of the scaffold was much improved. By using the DOE, We were possible to derive the output condition of scaffold.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1348-1356
• /
• 2002

The present work concerns the optimal design for injection molding processes by using the design of experiments (DOE) and numerical analysis. The DOE approaches is planned to be able to consider two-way interaction, and have been applied progressively for both mold design and process design. Numerical analyses have been carried out as a design of experiments for mold parameters such as runner specifications and cooling channel configurations. In order to determine optimal process parameters, experiments have been performed for various process conditions with the DOE scheduling. As a result, the quality and productivity of the product have been improved, and the proposed approach can be successfully reflected on the industrial injection molding process of precision electronics parts.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2952-2962
• /
• 2000

The design of experiment(DOE) is getting more attention in the engineering community since it is easy to understand and apply. Recently, engineering designers are adopting DOE with orthogonal arrays when they want to design products in a discrete design space. In this research, a design flow with orthogonal arrays is defined for structural design according to the general DOE. The design problem is defined as a general structural optimization problem. Sensitivity information is evaluated by the analysis of variance(ANOVA), and an optimum design is determined from analysis of means(ANOM). Interactions between design variables are investigated to achieve additivity which should be valid in DOE. When strong interactions exit, a method is proposed. Some methods to consider the problem are suggested.

• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.643-655
• /
• 2005

The frontal crash optimization of S-shaped closed-hat section member using the homogenization method, design of experiment (DOE) and response surface method (RSM) was studied. The optimization to effectively absorb more crash energy was studied to introduce the reinforcement design. The main focus of design was to decide the optimum size and thickness of reinforcement. In this study, the location of reinforcement was decided by homogenization method. Also, the effective size and thickness of reinforcements was studied by design of experiments and response surface method. The effects of various impact velocity for reinforcement design were researched. The high impact velocity reinforcement design showed to absorb the more crash energy than low velocities design. The effect of size and thickness of reinforcement was studied and the sensitivity of size and thickness was different according to base thickness of model. The optimum size and thickness of the reinforcement has shown a direct proportion to the thickness of base model. Also, the thicker the base model was, the effect of optimization using reinforcement was the bigger. The trend curve for effective size and thickness of reinforcement using response surface method was obtained. The predicted size and thickness of reinforcement by RSM were compared with results of DOE. The results of a specific dynamic mean crushing loads for the predicted design by RSM were shown the small difference with the predicted results by RSM and DOE. These trend curves can be used as a basic guideline to find the optimum reinforcement design for S-shaped member.

• 한국기계가공학회지
• /
• 제7권1호
• /
• pp.53-61
• /
• 2008

In this research, the layout and geometry of U-type ribs in the part, including significant process conditions, are automatically optimized to reduce part warpage with robustness in consideration. The optimization procedure are based on an iterative redesign methodology integrated with computer aided injection molding simulation, Taguchi's Design of Experiment(DOE), and a direct search-based optimization method. The robustness of a design alternative is efficiently measured by introducing composite noise factor and Taguchi's signal-to-noise ratio. As a solution search methodology, the modified design space reduction method based on orthogonal arrays is employed to exploit an optimal robust design alternative. To illustrate the proposed methodology, a case study is performed on simulation results, where an optimal robust design alternative is obtained with a moderate number of iterations.

• 한국정밀공학회지
• /
• 제29권11호
• /
• pp.1207-1213
• /
• 2012

Typically commercial controllers do not give data of the controller gains. Therefore, it is very hard to determine the optimal controller gain even though the dynamic model is derived. In this case, design of experiment (DOE) methodology can be a powerful tool for gain tuning. In this research, gain tuning process is proposed based on the DOE. Micro parallel mechanism platform with 3 degrees-of-freedom (DOF) is used for the experiments. Controller gains are measured indirectly from the voltages of adjustable resistors. The controller gains of three actuators are optimized by two or three steps, respectively. The correlations of the controller gains are also analyzed. The process and methodology can be adopted in gain tuning of other mechanical systems.

• 한국CDE학회논문집
• /
• 제9권4호
• /
• pp.351-360
• /
• 2004

An optimal robust design methodology has been developed to minimize the warpage in a decorating panel of monitor molded by the plastic injection. For the associated methodology, the Taguchi's Design Of Experiment (DOE) based on orthogonal arrays and Signal-to-Noise Ratio is combined with commercial simulation tools f3r injection molding. An optimal robust design solution is statistically resulted from the computational simulation. The related experiment was done for evaluations of the warpage in the decorating panel part of monitor. This research showed that the warpage under the applied optimal design conditions was comparatively reduced.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1041-1044
• /
• 2002

Inchworm linear motor is one of the ultra precision position apparatuses and has many kinds of forms and structures according to the conditions of working space and range. In this paper, the Inchworm linear motor consists of three PZTs(Piezo-electric transducer), three columns ma two plates. finite element method was used to determine the type or hinges installed in column of inchworm linear motor DOE(Design of experiment) was used to determine the optimal design condition of a column by comparing the von-mises stresses according to the change of thickness of hinge, round of hinge, height of arm, angle of v-notch, round of v-notch and thickness of column. From the result, round of hinge, height of arm and thickness of hinge were determined a effective design parameters.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.453-458
• /
• 2005

Weight minimization of double-deck train carbody is imperative to reduce cost and extend life-time of train. It is required to decide 36 thickness of aluminum extruded panels. However, the design variables are two many to tract. moreover, one execution of structural analysis of double-deck carbody is time-consuming. Therefore, we adopt approximation technique to save computational cost of optimization process. Response surface model is used to apporximate static response of double-deck carbody. To obtain plausible response surface model, orthogonal array is empolyed as design of experiment(DOE). Design improvement by approximate model-based optimization is described. Accuracy and efficiency of optimization by using response surface model are discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.511-512
• /
• 2009