Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지

Warpage Minimization in the Injection Molded Decorating Panel of Monitor by Considering Robustness

강건성을 고려한 모니터 장식패널 사출품의 휨 최소화

  • 권오관 (LG전자(주) DID 연구실) ;
  • 박종천 (금오공과대학교 기계공학부) ;
  • 김경모 (금오공과대학교 신소재시스템공학부)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

An optimal robust design methodology has been developed to minimize the warpage in a decorating panel of monitor molded by the plastic injection. For the associated methodology, the Taguchi's Design Of Experiment (DOE) based on orthogonal arrays and Signal-to-Noise Ratio is combined with commercial simulation tools f3r injection molding. An optimal robust design solution is statistically resulted from the computational simulation. The related experiment was done for evaluations of the warpage in the decorating panel part of monitor. This research showed that the warpage under the applied optimal design conditions was comparatively reduced.

Keywords

References

  1. Yao, D., 'Direct search-based automatic minimization of warpage and weldlines in injection molded parts,' Masters Thesis, University of Massachusetts, MA, pp. 40-43, pp. 80-88, 1998
  2. Phadke, M. S., 'Quality engineering using robust design,' AT&T BellLaboratories, pp. 113-140, 1992
  3. Pandelidis, I. and Zou, Q., 'Optimization of injection moldingdesign, part II: Molding condition optimization,' Polymer Engineering and Science, Vol. 30, No. 15, pp. 883-892, 1990 https://doi.org/10.1002/pen.760301503
  4. Choi, G. H., Lee, K. D., Chan, N. and Kim, S. K., 'Optimization of process parameters of injection molding with neural network, application in a process simulation evironment,' CJRP Annals, Vol. 43, pp. 449-452, 1994
  5. 김석주, '유전 알고리즘을 이용한 사출 성형 조건의 최적화,' 석사학위 논문, 서울대학교, pp. 1-59, 1995
  6. 김영일, '유전 알고리즘을 이용한 사출 성형 설계의 자동화,' 박사학위 논문, 서울대학교, pp. 1-135, 1995
  7. Lee, B. H. and Kim, B. H., 'Optimization of part wall thickness to reduce part warpage based on the modified complex method,' Polym.-Plast. Tech. Eng., Vol. 34, No. 5, pp. 793-811, 1995 https://doi.org/10.1080/03602559508009600
  8. Dillman, S. H., Howe, D. and Robar, H., 'Optimization of the injection molding process,' SPE ANTEC Tech. Papers, Vol. 1, pp. 754-757,1996
  9. Park, J. C. and Kim, B. H., 'Automated molding design methodology to optimize multiple defects in injection molded parts,' International Journal of the Korean Society of Procision Engineering, Vol. 1, No. 1, pp. 133-145, 2000
  10. 박종천 외 2인, 'TOPSIS와 콤플렉스법에 의한 사출성형품의 다속성 강건설계,' 한국정밀공학회지, Vol. 18, No. 12, pp. 116-123, 2001.
  11. 김경모 외 2인, '직접탐색법을 이용한 사출성형품의 강건설계,' 한국품질경영학회지, Vol. 29, No. 3, pp. 86-96, 2001.
  12. Min, B. H., 'A study on quality monitoring of injection-molded parts,' Journal of Materials Processing Technology, Vol. 136, pp. 1-6, 2003
  13. 정종훈, 이건우, '사출금형을 위한 협업 설계 시스템의 개발,' 한국CAD/CAM학회논문집, Vol. 5, No. 1, pp. 50-60, 2000
  14. Malloy, R. A., 'Plastic part design for injection molding: An introduction," Hanser/Gardner Publishers, Inc., Cincinnati, pp. 63-87, 1994
  15. Schmidt, S. R. and Launsby, R. G., 'Understanding industrial designed experiments,' Air Academy Press, pp. 6-1-6-28, 1997
  16. Roy, R. K., 'Design of experiments using the taguchi approach,' John Wiley&Sons Inc., New York, pp. 336-363, 2001
  17. Moldflow Pty. Ltd., 'MOLDFLOW TRAINING MANUAL,' 2003
  18. 권태헌 외 5인 역, '사출성형 CAE 설계지침,' 문운당, pp. 125-128, pp. 138-151, 2001
  19. 이레테크, 'MINITAB 실무완성,' 2000