• Journal of Microbiology and Biotechnology
• /
• v.20 no.10
• /
• pp.1450-1456
• /
• 2010

Accurate and rapid diagnosis of Pandemic Influenza A/H1N1 2009 virus (H1N1 2009) infection is important for the prevention and control of influenza epidemics and the timely initiation of antiviral treatment. This study was conducted to evaluate the performance of several diagnostic tools for the detection of H1N1 2009. Flocked nasopharyngeal swabs were collected from 254 outpatients of suspected H1N1 2009 during October 2009. This study analyzed the performances of the RealTime Ready Inf A/H1N1 Detection Set (Roche), Influenza A (H1N1) Real-Time Detection Kit (Bionote), Seeplex Influenza A/B OneStep Typing Set [Seeplex Reverse Transcriptase PCR (RT-PCR)], BinaxNow Influenza A & B Test Kit [Binax Rapid Antigen Test (RAT)], and SD BIOLINE Influenza Ag kit (SD RAT). Roche and Bionote real-time RT-PCR showed identical results for the H1N1 2009 hemagglutinin gene. Compared with real-time RT-PCR, the sensitivities and specificities were 83.7% and 100% for Seeplex RT-PCR, 64.5% and 94.7% for Binax RAT, and 69.5% and 100% for SD RAT. The sensitivities of Seeplex RT-PCR, Binax RAT, and SD RAT in patients aged over 21 years were 73.7%, 47.4%, and 57.9%, respectively. The sensitivities of Seeplex RT-PCR, Binax RAT, and SD RAT on the day of initial symptoms were mostly lower (68.8%, 56.3%, and 31.3%, respectively). In conclusion, multiplex RT-PCR and RAT for the detection of H1N1 2009 were significantly less sensitive than real-time RT-PCR. Moreover, a negative RAT may require more sensitive confirmatory assays, because it cannot be ruled out from influenza infection.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.249-254
• /
• 2022

Silkworms, which have for long been used as an insect resource for industrialization, have recently attracted attention as potential bio-factories for the production of novel biomaterials. In this regard, material production is typically achieved based on transformation technology, mediated via microinjection, in which a target gene is inserted into eggs containing an embryo. However, an essential step in the microinjection procedure is egg fixation, which can be a time-consuming and laborious task. Therefore, in this study, using the 3DCADian program, we adopted a 3D printing approach to model egg liners and glue drawers, which can contribute to facilitating egg alignment and fixation, thereby enhancing transformation efficiency by reducing time consumption and fatigue. After rendering using Fusion 360, the two supplementary tools were produced by printing with nylon resin (PA12) and Sinterit Lisa Pro. Subsequent analysis of the time required to fix eggs on glass slides using the two manufactured tools, revealed that the processing time was reduced by approximately 18.6% when the two tools were used compared with when these tools were not used. These innovations not only reduced fatigue but also contributed to more effective use of the microscope and manipulator for microinjection. Consequently, we believe that with additional research and refinement, the egg liner and glue drawer developed in this study could be used to enhance silkworm transformation efficiency and study similar transformation systems in other industrial insects.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.243-254
• /
• 2019

With the recent accelerated policy-making and interests in new renewable energy, plans to develop and supply the new renewable energy have been devised across multiple regions in Korea. Solar energy, in particular, is being applied to small-scale power supply in provincial areas, as solar cells are used to convert solar energy into electric energy to produce electric power. Nonetheless, in the case of solar power plants, the need for a large stretch of land and considerable sum of financial support implies that the planning step should take into consideration the most suitable meteorological and geographical factors. In this study, the proxy variables of meteorological and geographical factors associated with solar energy were considered in analyzing the vulnerable areas regarding the photovoltaic power generation facility across the nation. GIS was used in the spatial analysis to develop a map for assessing the optimal location for photovoltaic power generation facility. The final vulnerability map developed in this study did not reveal any areas that exhibit vulnerability level 5 (very high) or 1 (very low). Jeollanam-do showed the largest value of vulnerability level 4 (high), while a large value of vulnerability level 3 (moderate) was shown by several administrative districts including Gwangju metropolitan city, Jeollabuk-do, Chungcheongbuk-do, and Gangwon-do. A value of vulnerability level 2 (low) was shown by the metropolitan cities including Daegu, Ulsan, and Incheon. When the 30 currently operating solar power plants were compared and reviewed, most were found to be in an area of vulnerability level 2 or 3, indicating that the locations were relatively suitable for solar energy. However, the limited data quantity for solar power plants, which is the limitation of this study, prevents the accuracy of the findings to be clearly established. Nevertheless, the significance of this study lies in that an attempt has been made to assess the vulnerability map for photovoltaic power generation facility targeting various regions across the nation, through the use of the GIS-based spatial analysis technique that takes into account the diverse meteorological and geographical factors. Furthermore, by presenting the data obtained for all regions across the nation, the findings of this study are likely to prove useful as the basic data in fields related to the photovoltaic power generation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.49-54
• /
• 2017

We collected and reared Theragra chalcogramma walleye pollock brood-stock for use in natural spawning tests and undertook to obtain domestic pollock via fertilized egg capture, development of fertilized eggs, and absorption of yolk sac after hatching. Whole pollock were caught with trammel and set nets and immediately placed in a deep-sea water tank. Adults were the most common pollock age group (43.0%; n = 86) among the 254 pollock captured in March 2014 with 57.9% (n = 147) being captured off Southern Gosung, Korea. The main spawning period of pollock is February (spawning phase of 91% of pollock). From the deep-sea tank, we collected 1640 mL of naturally fertilized eggs (~820,000 eggs) from 12 spawning events occurring between February 4 and 22 2015. The floating/ live eggs were maintained in deep-sea water tanks at $5.5{\pm}0.2^{\circ}C$. Egg size was $1.5{\pm}0.03mm$. Six hours after fertilization the eggs were at the 2 cell stage, and the eggs hatched approximately 340 hours after collection. At hatching, larval length and yolk sac area were $5.2{\pm}0.25mm$ and $9.5{\pm}1.00mm^2$ (100%), respectively. Four days after hatching, the yolk sac area was $2.2{\pm}0.53mm^2$ ($23.1{\pm}5.55%$). This is the first report of collection of naturally fertilized eggs from pollock and their subsequent hatching while held in an indoor deep-sea water tank. The results suggest that such collection could assist in the recovery of pollock resources and the possibility of domestic rearing of cultivated larvae.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.254-263
• /
• 2017

This study was carried out to introduce of agronomic characteristics, forage yields and quality of Sorghum ${\times}$ Sudangrass hybrids 'Cadan 99B' and 'Sweet Sioux WMR' from 2015 to 2016 in middle and southern regions of Korea. The field experiment design was complete in seven varieties with three repetitions. Sorghum ${\times}$ Sudangrass hybrids were sown on mid-May in middle region, and end-May in southern region of Korea, in 2015 and 2016. The observed average heading date of Cadan 99B and Sweet Sioux WMR were July 22. The heading dates of Cadan 99B and Sweet Sioux WMR were 8 days earlier than SX-17 and 5 days earlier than brown mid-rid (BMR) Revolution. The sugar contents of Cadan 99B and Sweet Sioux WMR were 6.5 and $6.9Brix^{\circ}$, respectively. Comparison with BMR variety, the sugar contents of Candan 99B and Sweet Sioux WMR were 0.2 and $0.6Brix^{\circ}$ higher than Revolution, respectively. The average of dry matter (DM) yield for 2 years and 2 regions of Cadan 99B (24,587kg/ha) were the highest among the seven varieties, but there was no significant difference among other varieties except headless control variety Jumbo (19,119kg/ha) and LATTE (20,778kg/ha) (p>0.05). The crude protein (CP) and in vitro dry matter digestibility (IVDMD) of Cadan 99B were 7.5% and 60.2%, and Sweet Sioux WMR were 6.9% and 60.7%, respectively. The results of this study indicated that Sorghum ${\times}$ Sudangrass hybrids Cadan 99B and Sweet Sioux WMR are earlier heading dates and higher than SX-17, and high yields of DM in middle and southern regions of Korea.

• Journal of Life Science
• /
• v.24 no.3
• /
• pp.252-259
• /
• 2014

The leaves of Peatasites japonicus are a traditional oriental medicine with diverse biological activities. A simple and specific analytical method for the quantitative determination of bakkenolide B constituents from methanolic extract of the leaves of P. japonicus was developed. Bakkenolide B was isolated from the leaves of P. japonicus, and its structure was elucidated based on 1D, 2D NMR, and GC-MS spectral data. A liquid chromatographic method was developed to evaluate the quality of P. japonicus through determination of major active compound, bakkenolide B. The wavelengths at 254 and 215 nm were chosen to determine bakkenolide B. The recovery of the method was in the range of 98.6 to 103.1%, and bakkenolide B showed good linearity ($r^2$=0.999) within test ranges. The developed method was applied to the determination of bakkenolide B in the plant part and seasonal changes. The results showed that the content of bakkenolide B in the leaf was higher than in the petiole and rhizome. In this study, a simple, rapid, and reliable high-performance liquid chromatography method was used to determine the percentage and composition of bakkenolide B in P. japonicus procured from different Petasites species plants in South Korea. The method can be employed in routine quantitative analysis and quality control of different products in the market.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.254-265
• /
• 2021

As a result of measuring the polyphenol content of Humulus japonicus (HJ) extract according to the collection time and extraction solvent, bothhot water extract and 70% ethanol extract were collected and extracted in June, and the polyphenol content was high. When the harvesting time was the same, the polyphenol content of the ethanol extract was higher than that of the hot water extract. As a result of measuring the antioxidant activity of HJ extract by measuring electron-donating ability, SOD-like activity, and ABTS radical scavenging ability, HJ6E, which has the highest polyphenol content, showed the highest activity. In addition, in the case of the extract collected in August, the polyphenol content was similar. However, the antioxidant activity of the ethanol extract was high, sothe antioxidant activity remained high when extracted with 70% ethanol. As a result of measuring tyrosinase inhibitory activity for evaluating skin whitening activity, HJ6W did not show any activity. The activity at the highest concentration was 16.18% for HJ8W, 8.07% for HJ6E, and 14.7% for HJ8E. Therefore, the content of ingredients showing skin whitening activity was higher in August than in June. In the elastase inhibitory activity for evaluating the anti-wrinkle activityof the skin, the ethanol extract showed very little activity, and the hot water extract did not. In addition, since all extracts do not show astringent activity, it is judged that it is not appropriate to use HJ as a functional ingredient for preventing wrinkle formation. As a result of measuring the cell viability of HJ6E, which showed the highest polyphenol content and antioxidant activity, it showed a cell proliferation effect at low concentrationsbut strong cytotoxicity at concentrations above 50 ㎍/mL. In the case of the NO production inhibitory ability, as the concentration increased, the NO production of Raw 264.7 was suppressed. Theamount of NO production at 1,000 ㎍/mL decreased to 40.7%. However, whether these results are due to cytotoxicity or the extract's efficacy is a part that requires further research.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.254-260
• /
• 2019

Purpose: To evaluate the relationship between the knee function at 1 year postoperation and the gap difference (90° flexion gap-extension gap) in total knee replacement. Materials and Methods: Eighty-two consecutive osteoarthritis knees that underwent primary total knee replacement using navigation from March 2017 June 2017 were evaluated prospectively. The gap was measured using navigation after reducing the patella with towel clips. After checking the average values of the medial and lateral gaps at extension and 90° flexion knee, the gap difference (90° flexion gap-extension gap) was calculated. The knees were divided into three groups according to the gap difference (gap difference<0 mm, 0 mm≤gap difference<2 mm, 2 mm≤gap difference). The Knee Society score (KSS) and maximal knee flexion were compared at 1 year postoperation among three groups. Results: The numbers of knees according to groups were 37, 29, and 16 knees in regular order. The average of the KSS knee, KSS function, and maximal knee flexion at the 1-year follow-up were 81.21±8.31, 71.34±9.84, and 126.48°±7.28°, respectively. No statistically significant difference in KSS was observed among the 3 groups. The third group (2 mm≤gap difference) showed a larger maximal knee flexion than the other groups in the Mann-Whitney test. Conclusion: The group of total knee replacement (2 mm≤90° flexion gap-extension gap) showed larger maximal knee flexion than the other groups at the 1-year follow-up in statistics.

• Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.254-262
• /
• 2019

Background: To exploit the ornamental and medicinal purposes of Lonicera harae Makino, L. subsessilis Rehder, L. praeflorens Batalin, and L. insularis Nakai, native to Korea, it is necessary to understand their seed ecology for propagation. In this study, we investigated the seed dormancy type and germination characteristics of seeds of the four Korean native Lonicera species. Results: The seeds of the four Lonicera species imbibed water readily, suggesting that the species do not have physical dormancy. Furthermore, the seeds exhibited underdeveloped embryos with only about 15-25% of the length of the seeds at dispersal. The embryos grew to the critical length with approximately 50-80% of the length of the seeds' development before radicle protrusion. Further, 94.4% and 61.1% of freshly matured seeds of L. insularis and L. harae germinated within 4 weeks after sowing at 15 ℃ and 20 ℃, respectively. Contrarily, L. praeflorens and L. subsessilis seeds did not germinate within 4 weeks under all temperature treatments. At 15 ℃, L. praeflorens seeds started to germinate from 5 weeks and the final germination rate was 51.1% at 13 weeks. At 15 ℃, L. subsessilis seeds started to germinate from 5 weeks after sowing and the final germination rate was 85.6% at 17 weeks after sowing. Embryo growth and germination of L. praeflorens and L. subsessilis occurred at a relatively high temperature (≥ 15 ℃). Conclusions: Overall, L. insularis seeds have only morphological dormancy. The seeds of L. harae have approximately 60% and 40% of morphological dormancy and morphophysiological dormancy, respectively. Contrarily, L. praeflorens and L. subsessilis exhibited non-deep simple-type morphophysiological dormancy that requires relatively high temperature (≥ 15 ℃) for embryo growth and dormancy breaking. The optimum temperature for the germination of seeds of L. insularis, L. harae, L. praeflorens, and L. subsessilis was 15 ℃, 20 ℃, 15 ℃, and 20 ℃, respectively. There was interspecific variation in seed dormancy and germination patterns in the four Lonicera species. The difference in these characteristics within the four Lonicera species could be useful for understanding the seed ecophysiological mechanisms of Lonicera species.

• Journal of the Korean Chemical Society
• /
• v.44 no.3
• /
• pp.220-228
• /
• 2000

This study deals with the water qualities of Dalgi mineral spring in Cheongsong district.Water samples which were taken from upper, middle and bottorn spring sites were tested for twenty eight important water quality items including minerals, essential and/or toxic trace elements, and the analytical items to affect the taste of mineral water, seasonally from May 1999 to February 2000 The results obtained wereas follows:Each spring site showed much difference in major items. Bottom spring water showed higher value of Mg and Na than others. Middle spring water showed the highest value in all of the items except Mg and Na. The concentration of Hardness, Fe and Mn in mineral water were over than the normal standard for drinking water, but these items are not specified for the mineral water. As, Cd, $Cr^{6+}$ and Hg were not found and Pb was found ln trace level. All of the items proved nearly constant during the four seasons except water temperature. The contribution of mineral water to the nutrition of human was calculated in order to investigate the health effect of drinking water on the bases of Required Daily Allowance,one liter of water drinking and the mineral concentration of the bottom spring. The percentage of consumable minerals of Ca, Mg, Na, K, Mn,Zn and Fe were 35.05,36.43,5.88∼10.63,0.19∼0.57,21.86∼43.72,0.65, and 95.l respectively. This means Dalgl mineral water is pIenty of iron mineral. The K and O indexes of mineraI water appeared to be good for healthy and delicious water.