• 융합신호처리학회논문지
• /
• 제9권3호
• /
• pp.219-223
• /
• 2008

스크린 프린트법으로 저가형 후막 용존산소 센서를 제작하고, 휴대용 용존산소 측정 시스템을 구현하였다. 전류 특성은 인가전압(바이어스 전압)을 0.7 V로 하였을 때, 응답시간도 짧고 전류 값의 변화도 가장 크다는 것을 알 수 있었다. 시스템의 구현은 MCU, 증폭단, 필터단, 전원부 및 디스플레이로 구성하였다. 용존산소 농도는 아날로그 값을 디지털로 변환하여 백분율로 표현되도록 프로그램하였다. 제작된 용존산소 측정 시스템은 표준 용액 대비 오차 ${\pm}0.5%$의 정확도 및 약 100초의 응답시간을 나타내어 고가의 상용 용존산소 센서를 대치할 수 있을 것으로 기대된다.

• 센서학회지
• /
• 제14권6호
• /
• pp.444-454
• /
• 2005

The IEEE 1451.4 standards defines an architectural model for interfacing smart transducers for sensors & actuators. This standard allows analogue transducers to communicate their identification and calibration data in a digital format. A digital format is called the TEDS (transducer electronic data sheet). However, the standard template TEDS of IEEE 1451.4 do not supports sensors to use in electronic tongue system, such as arrayed-potentiometric and voltametric sensors. In this paper, a solution to standardize sensors for E-Tongue (electronic tongue) and electronic tongue systems is presented.

• 센서학회지
• /
• 제18권3호
• /
• pp.217-221
• /
• 2009

Different methods of material engineering, used for improvement of solid state gas sensors parameters are reviewed in this report. The wide possibilities of material engineering in optimization of gas sensing properties were demonstrated on the example of $SnO_2,\;TiO_2\;and\;In_2O_3$-based sensors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.123-126
• /
• 2005

The IEEE 1451.4 standards defines an architectural model for interfacing smart transducers for sensors & actuators. This standard allows analogue transducers to communicate their identification and calibration data in a digital format. A digital format is called TEDS(transducer electronic data sheet). However, the standard template of IEEE 1451.4 TEDS do not supports gas sensors to use in electronic nose system, such as array sensors. In this paper, a solution to standardize sensors for electronic nose systems is presented.

• 전자공학회논문지SC
• /
• 제43권1호
• /
• pp.21-30
• /
• 2006

IEEE 1451.4는 센서 및 액츄에이터를 위한 스마트트랜스듀서의 연결 표준안으로 정의되었다. 이 표준은 아날로그 트랜스듀서의 정보를 디지털 형태로 전송한다 이 디지털 형태의 정보를 TEDS(transducer electronic data sheet)라고 부른다. IEEE 1451.4 TEDS는 전자코 시스템에서의 어레이 센서에 대해서는 이용하기가 어렵다. 본 논문은 전자코 시스템에서 센서 인터페이스의 대한 표준화에 대해 분석해보고 새로운 방안을 제안한다.

• International journal of advanced smart convergence
• /
• 제3권2호
• /
• pp.14-17
• /
• 2014

Precision agriculture relies on information technology, whose precondition is providing real-time and accurate information. It depends on various kinds of advanced sensors, such as environmental temperature and humidity, wind speed, light intensity, and other types of sensors. Currently, it is a hot topic how to collect accurate information, the main raw data for agricultural experts, monitored by these sensors timely. Most existing work in WSNs addresses their fundamental challenges, including power supply, limited memory, processing power and communication bandwidth and focuses entirely on their operating system and networking protocol design and implementation. However, it is not easy to find the self-localization capability of wireless sensor networks. Because of constraints on the cost and size of sensors, energy consumption, implementation environment and the deployment of sensors, most sensors do not know their locations. This paper provides maximum likelihood estimators for sensor location estimation when observations are time-of arrival (TOA) range measurement.

• 센서학회지
• /
• 제21권2호
• /
• pp.127-134
• /
• 2012

Stroke patients must do the rehabilitation exercise to recover their fingers' function using a rehabilitation robot. But the rehabilitation robots mostly have not the force sensors to control the applied force to each finger. Thus, in this paper, the development of a force sensor for thumb rehabilitation robot and four two-axis force sensors for four-finger rehabilitation robot were developed. The force sensor and four two-axis force sensors could be used to measure the applied force to each finger, and the forces could be used to control the applied forces to each sensor in rehabilitation exercise using in the rehabilitation robot. The developed sensors have non-linearlity error of less than 0.05 %, repeatability error of less than 0.03 %, and the interference error of two-axis force sensor is less than 0.2 %.

• 센서학회지
• /
• 제32권1호
• /
• pp.55-61
• /
• 2023

The objective of this study is to determine the concentrations of mixed gases by establishing a diagnosis method of a transformer using tunable-wavelength optical infrared sensors. Absorption of infrared light by methane, acetylene, and ethylene gases injected is measured from the outputs of the infrared sensors. Regression analysis equations of the gas concentrations are acquired from their respective measured absorption. The obtained concentrations are as follows: -3-9 % errors above 600 ppm(methane), 3 % errors above 1200 ppm(acetylene), and 10 % errors above 500 ppm(ethylene). The concentration inference equations obtained using the individual gases are applicable when the absorption wavelength bands do not overlap. The results of the fault analysis of a transformer using the Duval triangle method and the tunable infrared gas sensors are as follows: temperature faults with -1-1% errors and energy faults with -7-7 % errors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1334-1337
• /
• 2005

Orange-yellow phosphor has been synthesized by solid-state method for inorganic EL devices. Zinc sulfide is used as host material for the phosphor and the phosphor consists of copper and manganese as activators. The dependence of the photoluminescence (PL) and electroluminescence(EL) properties on the copper and manganese concentrations has been investigated.

• Structural Monitoring and Maintenance
• /
• 제2권2호
• /
• pp.145-164
• /
• 2015

Bridge scour is the predominant cause of overwater bridge failures in North America and around the world. Several sensing systems have been developed over the years to detect the extent of scour so that preventative actions can be performed in a timely manner. These sensing systems have drawbacks, such as signal inaccuracy and discontinuity, installation difficulty, and high cost. Therefore, attempts to develop more efficient monitoring schemes continue. In this study, the viability of using optical dissolved oxygen (DO) probes for monitoring scour depths was explored. DO levels are very low in streambed sediments, as compared to the standard level of oxygen in flowing water. Therefore, scour depths can be determined by installing sensors to monitor DO levels at various depths along the buried length of a bridge pier or abutment. The measured DO is negligible when a sensor is buried but would increase significantly once scour occurs and exposes the sensor to flowing water. A set of experiments was conducted in which four dissolved oxygen probes were embedded at different soil depths in the vicinity of a mock bridge pier inside a laboratory flume simulating scour conditions. The results confirmed that DO levels jumped drastically when sensors became exposed during scour hole evolution, thereby providing discrete measurements of the maximum scour depth. Moreover, the DO probes could detect any subsequent refilling of the scour hole through the deposition of sediments. The effect of soil permeability on the sensing response time was also investigated.