• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.725-732
• /
• 2013

Recently, various applications for LED lightings are growing continuously due to their better performances such as low power consumption, longer life time, operation speed, controllability, high quality color rendering, and sustainability. However, in developing the high-powered LEDs illumination system, heat-sink problem is one of the important obstacle. In this paper, a heat-sink design with multi-layered structure for high-powered LEDs is proposed, which is composed of metal core PCB, heat-pipes, heat-sink plates, and fans. And also, in this paper, a design for LED controls using DMX512 protocols through RS-485 communications is proposed, which is considered as de facto international standard in LEDs illumination control and is widely used in landscape lighting and stage lighting. In this paper, LED control and its application techniques are introduced and the method of wireless remote control for main controller is proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2559-2564
• /
• 2010

The indoor and outdoor lighting industry has become the bigger and more systemized using the semiconductor LED with each control R(Red), G(Green), B(Blue). The communication standard DMX512(ANSI E1.11) protocol of it can control and perform max. 512 lightings, especially 170 lightings in 24 bit true color. As the performance of below 100 lightings is distinguished small-size, this paper proposes a bigger capacity lighting performance above 1,000 using connection to 1 master to 32 slaves. Also, this paper proposes the synchronization method in order to accomplish a designed performance. In proposed method, the master sends the synchronization signal to slaves every 400ms. Slaves receive this signal and use to initialize the timer becoming the basis of DMX512 output. The example of the developed products using proposed method and the operation is introduced.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.4
• /
• pp.383-390
• /
• 2014

The following conclusion was made from the 2D-QSAR model for the tyrosinase inhibitory activity according to the variation of the substituents R1 and R2 in analogues of compound 2-[(2,6-dioxocyclohexyl)methyl]cyclohexane- 1,3-dione (1-23). The best optimized 2D-QSAR model was $Obs.pI_{50}=-0.295({\pm}0.031)TDM$ $-0.120({\pm}0.014)DMZ+0.135({\pm}0.050)DMX.R_2+6.382({\pm}0.17)$, and the correlation $r^2=0.905$) of which was greater than its predictability ($q^2=0.843$). The magnitude of the effect of tyrosinase inhibitory activities was in order of TDM > $DMX.R_2{\geq}DMZ$, and it tended to increase as the hydrophobicity of substrate molecule (ClogP > 0) as well as the steric favor of substituent $R_1$ increased. The analysis of the model implies that inhibitory activity of substrate molecule will increase as $DMX.R_2$ (Dipole moment X component of $R_2$-substituent) increases, while TDM (Total Dipole Moment) and DMZ(Dipole Moment of Z-Component) decrease. As such, it is deemed feasible to conclude, that in order to increase the inhibitory effect, it would be rather desirable to replace the polar groups within the molecules with non-polar functional groups.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.360-363
• /
• 2011

카메라 촬영시 LED방송조명 등기구를 조도 디밍하는 경우에 카메라 셔터속도가 빨라 질 경우, 카메라가 신호를 감지하며 카메라 영상에 플리커 현상이 생기게 된다. 그 현상을 없어지게 하기 위하여 LED 디머의 PWM속도를 충분히 높여주어서 카메라 셔터속도가 빨라져도 어느 정도 범위에서 감지하지 못하도록 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1053-1059
• /
• 2011

DMX512 protocol is a typical protocol which controls LED lighting system. It has a strong feature and can be used to a lot of lighting system. But LED control system with cable has a few problem because they have a lot of control cables. It is very difficult to set up the complex lighting. Furthermore if it is set up it is not easy to keep and recover the system from the out of order. So it is required Wireless Lighting Control System. This paper describes the proposal, design, and implementation of a novel method which can provide versatile light effects with the increased capability of the mobility and the number of universes for Wireless Lighting system. And then we implement experiment environment to control indoor lighting system controled by ZigBee and WLAN converter not having complicating control line. Data frames are transferred to DMX512 device by encapsulation and decapsulation to control color LED. In the same time give the method to solve the data bottleneck problem which can be comes out because of speed difference between Heterogeneous network and measure performance of control system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.559-560
• /
• 2009

네트워크를 이용한 LED 조명의 제어는 최근 IP(Internet Protocol)을 이용한 조명 제어와 융합되어 단순한 디밍(Dimming)제어 뿐만 아니라, 미디어 파사드(Media facade), 카이네틱 아트(Kinetic Art)등의 새로운 조명 분야로 범위가 확대 되고 있다. 본 논문에서는 다양화 되는 네트워크 기반의 제어 방식 중 DMX over IP 에 대하여 멀티케스트-다중화 방식(Multicast & Multiplexing)으로 분석 및 시뮬레이션 하였다. 그 결과 1 만개 이상의 채널 수를 가지는 규모가 큰(large volume) 조명 네트워크 시스템의 경우 채널의 개수 증가가 delay-throughput 에 영향이 적음을 알 수 있다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.4
• /
• pp.4251-4258
• /
• 1976

In the construction of earth dam, embankment and highway by filling, a compaction contributes to increasing the density of soil by applying pressure. The effect of compaction depends on various factors such as soil type, moisture content, gradation, consistency, and compaction energy. In this study, the correlations amone maximum dry density, moisture content, dry density, and moisture content are analyzed. Some results obtained in this study are summarizep as follows. 1. The maximum dry density sinoreases with increased of optimum moisture content and the correlations of them can be represented by; ${\gamma}$dmx=a-b(W0) 2. Maximum dry density and liquid limit show negative linear correlation and can be represented by; ${\gamma}$dmx=a-b(LL). 3. Optimum moisture content and liquid limit, plastic limit show positive linear correlation and can be represented by the following equation, W0=a+b(LL) W0=a+b(PL). 4. Liquid limit and plastic limit show positive linear correlation, and can be represented by the following equation, LL=a+b(PL).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.6-17
• /
• 2015

In this paper, colors of broadcast lightings composed of Red, Green, and Blue LED(Light Emitted Diode) can be linearly and quantitatively controlled in low illuminance. Because LED cannot emit uniform illuminance in low illuminance, the colors of RGB LED are unmixable. Furthermore, the illuminances are nonlinear with the dimming values of the RGB LED due to the nonlinearity of the output illuminance with the current through the LED. This nonlinearity generated errors of the target colors and illuminances. The proposed algorithm set up the target colors, which is expressed by the color coordinates in CIE 1931 color space, and the target illuminances. Then the illuminances of RGB LED were calculated using color mixing theory. The calculated illuminances determined the dimming values of the RGB LED for transmission via DMX512 communication. After the broadcasting lighting received the dimming values of the RGB LED via DMX512 communication,.RGB LED can emit target color and illuminance, and be controlled by calculating the PWM(Pulse Width Modulation) duty ratio of the hybrid LED driver which be considered the nonlinearity for the illuminances of the LED. As a result, the proposed algorithm can linearly and quantitatively control the colors and illuminances in full range of illuminance. Then we verify experimentally that the errors of the emitted color coordination x, y and illuminance are 2.27%, 3.6% and 1.5%, respectively.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.407-417
• /
• 2013

In this paper, a reconfigurable peripheral unit for LED lighting communication is presented. Embedded lighting devices require various communication protocols. Usually, serial communication protocols and lighting control communication protocols such as DALI, DMX512, UART, SPI, IrDA, etc. are used in lighting devices. When the requirements of communication protocols are satisfied with separate IPs, the cost and the power consumption can considerably increase. We propose a reconfigurable communication peripheral unit which uses analysis of signal formats of the protocols. The gate count of the reconfigurable peripheral unit uses only 57% of the gate count of the separate implementation. Also, in this paper, a mapping table based DALI-ZigBee interfacing method for flexible lighting network configurations is proposed. Using this method, various DALI-ZigBee network systems can be easily set up. An LED lighting system platform is implemented to verify the operation of the DALI-ZigBee interfacing method. The reconfigurable peripheral unit and the DALI-ZigBee interfacing method can be efficiently used to implement various wired/wireless lighting communication systems.

• ETRI Journal
• /
• v.8 no.4
• /
• pp.18-27
• /
• 1986

시스팀의 소형화, 성능향상, 비용절감, 신뢰성 향상, know-how 보존 등 경쟁력 강화에 필수적인 시스팀의 custom IC화 추세에 따라 당 연구소에서 개발된 TDX-1 교환기에 쓰이는 custom IC 2종 (MUX/DMX IC)의 설계기술 개발내용, 의의및 기대효과, 향후추진방향 등을 기술하였다.