• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.6
• /
• pp.782-790
• /
• 2000

The mainly used polymeric material for the denture is PMMA because of its cost and easiness to handle. So it was widely used material among dentists for past decades. But the acrylic-based denture materials have several common weak points such as shrinkage after curing and lack of strength. In order to solve these problems, we adapted one of hybrid system using acrylic polymer and vinyloligosilsesquioxane(POSS). POSS, which is a well known expandable monomer during polymerization process, may eventually suppress volumetric shrinkage. And the hybrid system makes it possible for the polymer to be stable in various severe conditions. Eight different kinds of samples were designed and synthesized. Each samples were characterized with dynamic mechanical analyser(DMA) to confirm their thermodynamic properties, fractured to analyze the cross-sectional morphology of the samples. And elongation, flexural and impact tests were also executed to evaluate the mechanical properties of the samples. From the results, hybrid composites had well defined crosslinked network structure compared to the widely used denture materials, and the mechanical strength improved without changing any surface condition as increment with POSS ratio in hybrid system. Fractured morphology showed homogeneous surfaces in spite of mutli component system, therefore we can conclude that the adoption of the POSS brought the reinforcement of the denture resin.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.1
• /
• pp.47-59
• /
• 2015

A bioactive and multifunctional elastin-like polymer (ELP) was produced by genetic engineering techniques to develop new artificial matrices with the ability to mimic the extracellular matrix (ECM). The basic composition of this ELP is a thermo- and pH-sensitive elastin pentapeptide which has been enriched with RGD-containing domains, the RGD loop of fibronectin, for recognition by integrin receptors on their sequence to promote efficient cell attachment. Hydrogels of this RGD-containing polymer were obtained by crosslinking with hexamethylene diisocyanate, a lysine-targeted crosslinker. These materials retain the "smart" nature and temperature-responsive character, and the desired mechanical behavior of the elastin-like polymer family. The influence of the degree of crosslinking on the morphology and properties of the matrices were tested by calorimetric techniques and scanning electron microscopy (SEM). Their mechanical behavior was studied by dynamical mechanical analysis (DMA). These results show the potential of these materials in biomedical applications, especially in the development of smart systems for tissue engineering.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.105-110
• /
• 2011

Polyester/melamine cured coatings had been used for pre-primed coatings and pre-coated metal coatings, because it has good mechanical,chemical properties, and mar resistance. But it has weak points such as stiffness and low formability for making automotive components. Polyester had been synthesized using polycarbonate diol of long alkyl chain which can improve flexibility and formability which is one of the important factors for pre-coated steel sheets (PCM). In this study, strain and tensile strength were examined by the tensile test and formability was examined by the drawing test. Also, Those polyester resins were also measured by DMA to verify flexibility of cured coatings.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.761-765
• /
• 2009

The effects of probiotic bacteria on the functional properties of squid by-products were investigated during fermentation. Bifidobacterium longum, Lactobacillus acidophilus, Lactobacillus brevis, Lactobacillus casei, Lactobacillus paracasei, Lactobacillus rhamnosus, and Pediococcus acidilactici were used to ferment the squid by-products for 96 hr at $37^{\circ}C$. The numbers of all probiotics increased to $10^7-10^8$ CFU/g after 96 hr fermentation. No substantial pH changes were observed. L. rhamnosus and P. acidilactici showed the highest 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activities. Interleukin-6 (IL-6) and tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$) secreted from B cells increased after adding the extracts of probiotic-fermented squid by-products. The human NK cells were grown well in the B cell-growing broth cultured with the extracts of squid by-products fermented by L. rhamnosus and P. acidilactici. Trimethylamine (TMA) and dimethylamine (DMA) contents were significantly decreased after probiotic-fermentation. Therefore, L. rhamnosus GG and P. acidilactici can be used for the fermentation of squid by-products and their use would provide benefits in functional food products.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.2
• /
• pp.137-145
• /
• 1986

The contention resolution algorithm with the limited packet delay time as well stable distribution as the packet delay time is proposed and implementes for improving the mean packet delay time in the network employing CSMA/CD as the access method. The implementation of node controller is based on IEEE 802.2 standard logical link control(LLC) and IEEE 802.3 standard medium access control(MAC). Some portion of IEEE 802.3 Standard MAC, and the Binary Exponential Back-off(BEB) algorithm is replaced by the proposed algorithm. From the view of normalized mean packet transmission delay time, the controller implemented here can be applicable to the office-automation system, and the factory-and laboratory-automation environment where the limited time criterion is very significant.

• Journal of Environmental Health Sciences
• /
• v.44 no.1
• /
• pp.24-30
• /
• 2018

Objectives: Based on the amount of amalgam, the duration of exposure, and the water pH, this study aims to investigate the change patterns in the mercury concentrations in water after amalgams have been introduced into sewage water. It is expected that the study results will be useful in improving the system for regulating the amount of mercury that is introduced into the environment. Methods: During the study, a glass test-tube with a cap was washed and disinfected using the glass laboratory device washing method. Then, 1, 2, 3, and 4 tabs were placed into a 10 mL pH 4 solution and 10 mL pH 7 distilled water. Each specimen was prepared in duplicate. The mean of the two mercury concentrations was used as the representative value, and the mercury concentration was measured using a mercury measurement device (DMA-80, Milestone, Italy) a total of eight times at one-week intervals. Results: The results show that the lower was the pH, the higher was the amount of amalgam. Also the longer was the duration, the more significant was the increase of mercury concentration in the water. Conclusions: Dental clinics are collected separately from dental clinics that used them. Given this, dental clinics in Korea must have the necessary facilities to separately collect mercury at their level. In addition, proper disposal systems and social attention to the proper management of dental wastes are required to prevent environmental pollution from mercury.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.449-458
• /
• 1996

Most of the conventional electrocardiowaphs foil to detect signals other than P-QRS-T due to the limited SNR and bandwidth. High-resolution electrocardiography(HRECG) provides better SNR and wider bandwidth for the detection of micro-potentials with higher frequency components such as vontricular late potentials(LP). We have developed a HRECG using uncorrected XYZ lead for the detection of LPs. The overall gain of the amplifier is 4000 and the bandwidth is 0.5-300Hz without using 60Hz notch filter. Three 16-bit A/D converters sample X, Y, and Z signals simultaneously with a sampling frequency of 2000Hz. Sampled data are transmitted to a PC via a DMA-controlled, optically-coupled serial communication channel. In order to further reduce the noise, we implemented a signal averaging algorithm that averaged many instances of aligned beats. The beat alignment was carried out through the use of a template matching technique that finds a location maximizing cross-correlation with a given beat tem- plate. Beat alignment error was reduced to $\pm$0.25ms. FIR high-pass filter with cut-off frequency of 40Hz was applied to remove the low frequency components of the averaged X, Y, and Z signals. QRS onset and end point were determined from the vector magnitude of the sigrlaIL and some parameters needed to detect the existence of LP were estimated. The entire system was designed for the easy application of the future research topics including the optimal lead system, filter design, new parameter extraction, etc. In the developed HRECG, without signal averaging, the noise level was less than 5$\mu$V$_rms RTI$. With signal averaging of at least 100 beats, the noise level was reduced to 0.5$\mu$V$_rms RTI$, which is low enough to detect LPs. The developed HRECG will provide a new advanced functionality to interpretive ECG analyzers.

• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.137-143
• /
• 2011

Epoxy resins are widely used as high performance thermosets in many industrial applications, such as coatings, adhesives and composites. Recently, a lot of research has been carried out in order to improve their mechanical properties and thermal stability in various fields. Carbon nanotubes possess high physical and mechanical properties that are considered to be ideal reinforcing materials in composites. CNT-reinforced epoxy system hold the promise of delivering superior composite materials with their high strength, light weight and multi functional features. Therefore, this study used multi-walled carbon nanotubes (MWNT) and gamma rays to improve the mechanical and thermal properties of epoxy. The diglycidyl ether of bisphenol A (DGEBA) as epoxy resins were cured by gamma ray irradiation with well-dispersed MWNTs as a reinforcing agent and triarylsulfonium hexafluoroantimonate (TASHFA) as an initiator. The flexural modulus was measured by UTM (universal testing machine). At this point, the flexural modulus factor exhibits an upper limit at 0.1 wt% MWNT. The thermal properties had improved by increasing the content of MWNT in the result of TGA (thermogravimetric analysis). However, they were decreased with increasing the radiation dose. The change of glass transition temperature by the radiation dose was characterized by DMA (dynamic mechanical analysis).

• Journal of Adhesion and Interface
• /
• v.1 no.1
• /
• pp.38-46
• /
• 2000

A novel diamine monomer, containing fluorine and phosphine oxide, bis(3-aminophenyl) 3,5-bis(trifluoromethyl) phenyl phosphine oxide (mDA6FPPO), was prepared via Grignard reaction, and utilized to prepare polyimides with dianhydrides such as PMDA, 6FDA, BTDA or ODPA, by the conventional two-step route; preparation of poly(amic acid), followed by solution imidization. The polyimides were characterized by FT-lR, NMR, DSC and DMA, with intrinsic viscosity, and adhesive properties were also evaluated. A phosphine oxide containing monomer, bis(3-aminophenyl) phenyl phosphine oxide (mDAPPO) a nd a commercial 3,3'-diamino diphenyl sulfone (mDDS) were also used for comparison. The polyimides with mDA6FPPO exhibited high $T_g$, excellent solubility, and good adhesive properties.

• Elastomers and Composites
• /
• v.56 no.4
• /
• pp.209-216
• /
• 2021

In this study, we observed the mechanical properties, thermal stability, and low temperature sealing performance of fluorosilicone elastic composites. When the blend ratio of Phenyl vinyl methyl silicone (PVMQ) was increased, the tensile strength, modulus at 100%, and compression set were decreased. The thermal stability of fluorosilicone elastic composites showed a similar tendency. These were caused by poorer green strength of PVMQ than Fluorosilicone rubber (FVMQ). The change in the tensile strength and elongation at -40℃ showed a decreasing tendency with increasing PVMQ blend ratio. By increasing the PVMQ blend ratio, low-temperature performance was improved. The Dynamic mechanical analysis (DMA) results showed that T_g was decreased and low-temperature performance was improved with increasing PVMQ blend ratio. However tanδ was decreased becaused of the poor green strength and elasticity of PVMQ. From a hysteresis loss at -40℃, the hysteresis loss value was increased and fluorosilicone elastic composites showed the decreasing tendency of elasticity with increasing PVMQ blend ratio. From the TR test, TR10 was decreased with increasing PVMQ blend ratio. FS-4 (45% PVMQ blended composites) showed a TR10 of -68.0℃ that was 5℃ lower than that of FS-1 (100% FVMQ). The gas leakage temperature was decreased with increasing PVMQ blend ratio. The gas leakage temperature of FS-4 was -69.2℃ that was 5℃ lower than that of FS-1. Caused by the polymer chain started to transfer from a glassy state to a rubbery state and had a mobility of chain under T_g, the gas leakage temperature showed a lower value than T_g. The sealing performance at low temperature was dominated by T_g that directly affected the mobility of the polymer chain.