• 상하수도학회지
• /
• 제21권5호
• /
• pp.581-587
• /
• 2007

In order to suggest the methodology for improving the equality of flow distribution in a distribution channel, wet tests were carried out for pilot plant which was scaled down to 1/8 of full scale distribution channel being operated in domestic K_water treatment plant. The correlation between various hydraulic variables and their effects on the equality of flow distribution was evaluated through wet tests using pilot plant. From the results of wet tests, the longitudinal baffle with orifices was installed in the distribution channel, the equality of flow distribution was improved on the condition that the Froude number in pilot plant was similar with that in the full scale channel. Also, the opening ratio of the orifices on the longitudinal baffled did not have influence on the performance of the equality of flow distribution when the average flow velocity and Froud number were relatively low (Froude number ${\fallingdotseq} 0.01$). In the other hand, the performance of the equality of flow distribution was improved with increasing the opening ration of on the longitudinal baffle under conditions of relatively high average flow velocity and high Froud number(${\gtrsim}0.1$)

• 한국유기농업학회지
• /
• 제22권1호
• /
• pp.25-46
• /
• 2014

Since organized living cooperative associations sold their environment-friendly agricultural products directly to independent consumers in the past, the general distribution channels such as wholesalers had difficulty in handling these products. However, the ratio of distribution via wholesale channel has been gradually increased as consumption of environment-friendly agricultural products has expanded. This study is to address vitalization of wholesale distribution for environment-friendly agricultural products by gathering previous statistical data and analysis. In addition, statistical analysis are conducted by utilizing surveys on forwarders, consumers for environment-friendly agricultural products. As a result, the products producers ship are distributed through dealers at producers sites, producers cooperatives, or food process companies, food companies, internet shopping malls, large-scale distribution companies, consumer groups such as living cooperative associations, direct outlets at consumers sites, or exports. Among the channels, the large-scale distribution companies and franchised special shops account for 47%, the general supermarkets 15.7%, and living cooperative associations 14.6% respectively. By utilizing the research results on producers and consumers, and the distribution weight by channels for environment-friendly agricultural products, the distribution channels for living cooperative associations, wholesale markets, and large scale distribution companies are compared and evaluated. As a result, the level of producers' and consumers' satisfaction for them is the lowest since the low selling price for producers and high distribution margins.

• 한국물환경학회지
• /
• 제25권3호
• /
• pp.425-431
• /
• 2009

It is very important to know the probability distribution of water-quality constituents for water-quality control and management of rivers and reservoirs effectively. The probability distribution of BOD in Anseong Stream was analyzed in this paper using Kolmogorov-Smirnov test which is widely used goodness-of-fit method. It was known that the distribution of BOD in Anseong Stream is closer to Log-normal, Gamma and Weibull distributions than Normal distribution. Normal distribution can be partially applied depending on significance level, but Log-normal, Gamma and Weibull distributions can be used in any significance level. Also the estimated Log-normal distribution of BOD at Jinwi3 station was to be compared with the measured in 2001, 2002 and 2003 years. It was revealed that the estimated probability distribution of BOD at Jinwi3 follows a theoretical distribution very well. The applicable probability distribution of BOD can be used to explain more rigorously and scientifically the achievement or violation of target concentration in TMDL(Total Maximum Daily Load).

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.607-610
• /
• 2015

농산물 유통은 농산물이 생산자인 농민으로부터 최종 소비자의 손에 이르기까지의 모든 경제 활동을 의미한다. 일반적으로 국내 농산물은 유통경로가 복잡하고 유통과정에 참여하는 유통주체가 많아 유통비용이 많이 소요되고 유통마진율이 상대적으로 높은 것이 특징이다. 따라서 유통경로 상에 참여하는 구성원들이 상호 정확하고 원활한 정보교환과 공유체계를 바탕으로 정보를 통합 관리할 수 있는 통합유통정보시스템일 필요하다. 따라서 본 논문에서는 통합유통정보시스템을 구현하기 위한 유통정보 데이터베이스 및 유통단계별 시스템 간의 정보 공유와 활용을 위한 자료 구조에 대한 표준화 방안을 제시하고자 한다.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.753-759
• /
• 2016

Power automation system to operate power distribution systems can be distinguished by distribution SCADA with remote monitoring and control; and distribution automation system with basic functions such as service restoration to the distribution SCADA; and distribution management system which is operated by various applications in order to enhance distribution system operation performance based on the distribution automation system. In the technological change, a technical boundary of information technology (IT) and operation technology (OT) is being blurred by that new concepts such as interoperability. In addtion, IT/OT convergence has been proposed by the improvement of ICT and power system technology. At the viewpoint, advanced distribution management system (ADMS) to have the new concepts and to increase distribution system operation efficiency through global information and functions from the other systems has been proposed. In order to implement the ADMS, IT and OT have to be employed together on the ADMS; and the concept-based IT/OT convergence concept has been presented. Therefore, this paper introduces ADMS and IT/OT convergence and proposes a design of IT/OT convergence based ADMS system design with configurations and functions.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.669-676
• /
• 2018

Transmission system has been well studied since long time and power system techniques of distribution system are more or less derived from transmission system. However, unlike transmission systems, many practical issues are encountered in the distribution system. Considerable amount of error is observed in voltage obtained from the Feeder Remote Terminal Units (FRTUs) measured by the pole mounted PTs along the distribution feeder. Load uncertainty is also an issue in distribution system. Further, penetration of Distributed Generators (DGs) creates voltage variations in the system. Hybrid radial/ loop distribution system also make it complicated to handle distribution system. How these constraints to be handled under Distribution Automation (DAS) environment in order to obtain error free voltage is described in this paper and therefore, a new approach of voltage error correction technique has been proposed. The proposed technique utilizes reliable data from substation and the FRTUs installed in DAS. The proposed technique adopts an iterative process for voltage error correction. It has been tested and proved accurate not only for conventional radial systems but also for loop distribution systems.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.195-202
• /
• 2011

The study interprets each of three classification models based on Bath-Tub Failure Rate (BTFR), Extreme Value Distribution (EVD) and Conjugate Bayesian Distribution (CBD). The classification model based on BTFR is analyzed by three failure patterns of decreasing, constant, or increasing which utilize systematic management strategies for reliability of time. Distribution model based on BTFR is identified using individual factors for each of three corresponding cases. First, in case of using shape parameter, the distribution based on BTFR is analyzed with a factor of component or part number. In case of using scale parameter, the distribution model based on BTFR is analyzed with a factor of time precision. Meanwhile, in case of using location parameter, the distribution model based on BTFR is analyzed with a factor of guarantee time. The classification model based on EVD is assorted into long-tailed distribution, medium-tailed distribution, and short-tailed distribution by the length of right-tail in distribution, and depended on asymptotic reliability property which signifies skewness and kurtosis of distribution curve. Furthermore, the classification model based on CBD is relied upon conjugate distribution relations between prior function, likelihood function and posterior function for dimension reduction and easy tractability under the occasion of Bayesian posterior updating.

• 조명전기설비학회논문지
• /
• 제27권9호
• /
• pp.83-89
• /
• 2013

Power distribution system has been changed from radial system to closed loop or mesh system due to connection of distributed generation growth. Data from distribution equipments which are installed at distribution line is required to be accurate for the performance of DMS(Distribution Management System). This paper analyzes the voltage measurement data from distribution equipment. However, the results of the analysis are confirmed to have some errors in voltage measurement data from distribution equipment. These errors come from aging of voltage sensor in distribution equipment and inaccurate data transfer to FRTU(feeder remote terminal unit) through the controller. The main problem is that the voltage measurement data of distribution equipment can not be assessed after it's first installation at the distribution line. The voltage measurement accuracy assessment system is to assess the voltage measurement data from distribution equipment on hot-line. This study had a field test to verify the performance of system.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.201-201
• /
• 2016

The asymptotic extreme value distributions of maxima are a natural choice when designing against future extreme events like flood peaks or wave heights, given a stationary time series. The generalized extreme value distribution (GEV) is often utilised in this context because it is seen as a convenient single expression for extreme event analysis. However, the GEV has a drawback because the location of the distribution bound relative to the data is a discontinuous function of the GEV shape parameter. That is, for annual maxima approximated by the Gumbel distribution, the data is also consistent with a GEV distribution with an upper bound (no lower bound) or a GEV distribution with a lower bound (no upper bound). A more consistent single extreme value expression for design purposes is proposed as the Weibull distribution of smallest extremes, as applied to transformed annual maxima. The Weibull distribution limit holds here for sufficiently large sample sizes, irrespective of the extreme value domain of attraction applicable to the untransformed maxima. The Gumbel, Type 2, and Type 3 extreme value distributions thus become redundant, together with the GEV, because in reality there is only a single asymptotic extreme value distribution required for design purposes - the Weibull distribution of minima as applied to transformed maxima. An illustrative synthetic example is given showing transformed maxima from the normal distribution approaching the Weibull limit much faster than the untransformed sample maxima approach the normal distribution Gumbel limit. Some New Zealand examples are given with the Weibull distribution being applied to reciprocal transformations of annual flood maxima, where the untransformed maxima follow apparently different extreme value distributions.

• 유통과학연구
• /
• 제20권8호
• /
• pp.59-67
• /
• 2022

Purpose: This study identifies how twelve key success factors of distribution strategies for community enterprises in Thailand achieve higher performances. Research design, data, and methodology: The samples in this study were 400 entrepreneurs throughout the country. The instrument for data elicitation was a questionnaire. The descriptive and inferential statistics for data analysis were percentage, mean, standard deviation, T-Test, F-Test, multiple regression, and multiple correlations. Results: The results revealed that, overall, the samples showed high opinions on online distribution strategies in all aspects. In detail, the three highest factors were as follows: 1) electronic satisfaction, 2) product characteristics and electronic trust, and 3) the quality and success in online distribution. In detail, the three highest aspects of online distribution success were customer loyalty, financial performance, and work management, respectively. The online distribution strategies influencing community enterprises' success were electronic trust, electronic loyalty, social information, electronic satisfaction, and online distribution tools, which had a statistical significance of 71. Conclusions: This research has made an essential contribution to community enterprise entrepreneurs should focus on and adopt these 8P+4ODS concepts to increase sales, maintain brand loyalty of existing customers, get new customers, develop learning, and improve the working potentials of community enterprise entrepreneurs.