• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.527-533
• /
• 2004

This study has based on RTKGPS and DGPS and Digital Video Camera to 3-dimensional position data of road, as a Road Spatial Information. Economic efficiency analysis was applied to road spatial information system built up by four different methods such as conventional surveying, RTK GPS, DGPS, and Digital Video Camera. As a result of analysis, it was shown conventional surveying 100%, it was shown that about 64% in RTKGPS, it was shown that about 63% in DGPS, it was shown that about 37% in Digital Video Camera cost-saving.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.12
• /
• pp.631-638
• /
• 2016

GNSS(Global Navigation Satellite System) such as GPS(Global Positioning System), GLONASS(GLObal NAvigation Satellite System) has been used in various fields for construction of geospatial inforamtion. But RTK or VRS method for high accuracy has some bad points like requirement of additional GNSS device and internet. So, this methods are difficult to take advantage of field survey. In this study, In this study, experiments using DGPS handheld devices and smart devices that can maximize mobility through was to suggest ways to improve the efficiency of field survey work. As a results, field survey work with smart devices is difficult to apply the limits of accuracy yet. On the other hand, DGPS has been found possible to determine the position accuracy within 1m. If DGPS is used in related work can greatly improve the efficiency of field survey work, which is currently much is done by hand, it is expected to serve as the basis for a structured GIS data management.

• Structural Engineering and Mechanics
• /
• v.36 no.2
• /
• pp.129-147
• /
• 2010

This study deals with the viability of using a designed geometrical model consists of plane, polar coordinates (PC) and span length in the determination of bridges deformation. The data of a Tianjin Yonghe bridge located in the southern part of China as collected by RTK-DGPS technique and Accelerometer were used in the analysis. Kalman filter and fast Fourier transformation (FFT) analyses were used to determine the frequency. The results indicate that the designed plane and PC geometrical model are easy to calculate the long-time structural deformation monitoring. In addition, the observed frequency using GPS with the rate of 20 Hz doesn't give correction natural frequency of the observation structures.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.31-39
• /
• 2015

This paper presents the static and kinematic positioning accuracy by the real-time GPS positioning modes of the low-cost GPS receivers using NTRIP-based augmentation service. For this, acquires both the raw measurements data of the field tests by LEA 6T GPS module of u-blox AG, and correction communication via NTRIP caster with RTKLIB as an open source program for GNSS solution. With computing the positions of the check points and road tracks by six kinds of GPS positioning modes which are Single, SBAS, DGPS, PPP, RTK, and TCP/IP_RTK, compared these results to the reference position of the check points. The position error average and rmse of the static test by GPS L1 RTK surveying showed $N=0.002m{\pm}0.001m$, $E=0.004m{\pm}0.001m$ in horizontal plane, and $h=-0.116m{\pm}0.003m$ in vertical, these results are very closed to the coordinates with the geodetic receiver. Especially, in case of the kinematic test with obstacles located on both sides of road, the computed track with ambiguity fixing showed very similar trajectory considerably from VRS network RTK mode. And also, evaluate and verify the performance of the TCP/IP_RTK mode developed based on TCP/IP protocol.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.16-24
• /
• 2012

This paper proposes a method utilizing Differential Global Position System (DGPS) with Real-Time Kinematic (RTK) and pre-built Geo-graphic Information System (GIS) to detect lane departure of a vehicle. The position of a vehicle measured by DGPS with RTK has 18 cm-level accuracy. The preconditioned GIS data giving accurate position information of the traffic lanes is used to set up coordinate system and to enable fast calculation of the relative position of the vehicle within the traffic lanes. This relative position can be used for safe driving by preventing the vehicle from departing lane carelessly. The proposed system can be a key component in functions such as vehicle guidance, driver alert and assistance, and the smart highway that eventually enables autonomous driving supporting system. Experimental results show the ability of the system to meet the accuracy and robustness to detect lane departure of a vehicle at high speed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.219-230
• /
• 2017

This paper proposes a vehicle to road tracking algorithm based on vision sensor by using EKF(Extended Kalman Filter). The lateral offset, heading angle, and curvature which are obtained from vehicle to road tracking might be used as inputs to steering controller of LKAS(Lane Keeping Assist System) or for the warning decision logic of LDWS(Lane Departure Warning System). To the end, in this paper, the yaw rate, steering angle, and vehicle speed as well as lane raw points together with considering of vehicle lateral dynamics are utilized to improve the exactness and convergence of the vehicle to road tracking. The proposed algorithm has been tested at a proving ground that consists of straight and curve sections and compared with GPS datum using DGPS-RTK equipment to show the feasibility of the proposed algorithm.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.431-435
• /
• 2003

GPS측량 방법은 크게 나누어 후처리 방법과 실시간 처리 방법으로 구분되며 후처리 방법은 다시 Static, Stop＆Go 및 동적(Kinematic) 방법으로 세분되고 실시간 처리 방법은 DGPS(Differential GPS)와 RTK(Realtime Kinematic) 방법으로 세분된다. 이와 같은 여러 가지 측량법 중 우리나라의 실무에서는 유독 후처리 방법 중의 Static 측량과 실시간 처리방법중의 DGPS 측량이 주로 사용되어 왔는데, 그런 배경에는 여러 가지 원인이 있으나 무엇보다도 가장 큰 원인은 공공측량 작업규정 등의 측량 관련 법규에서 다양한 종류의 GPS측량기법을 제도적으로 인정하지 못함으로 인하여 일반 측량기술자들의 GPS에 대한 인식이 결여된 때문이라 볼 수 있다.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2002.10a
• /
• pp.63-64
• /
• 2002

GPS 시스템을 사용하면 전세계에 걸쳐 언제든지 수$\pm$10m 이내의 오차범위에서 위치를 측정할 수 있다. 이보다 더 정밀한 위치가 필요할 경우에는 Differential GPS (DGPS)방식을 자주 사용한다. DGPS방식은 실시간 처리(Real time kinemetic: RTK)와 후처리(post-processing)방식으로 나눌 수 있다. 측위정도는 정적 후처리방식이 동적 후처방식이 보다 높은 것이 일반적이다. (중략)

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.295-305
• /
• 2018

Network RTK is a highly practical technology that can provide high positioning accuracy at levels between cm~dm regardless of user location in the network by extending the available range of RTK using reference station network. In particular, unlike other carrier-based positioning techniques such as PPP, users are able to acquire high-accuracy positions within a short initialization time of a few or tens of seconds, which increases its value as a future navigation system. However, corrections must be continuously received to maintain a high level of positioning accuracy, and when a time delay of more than 30 seconds occurs, the accuracy may be reduced to the code-based positioning level of meters. In case of SSR, which is currently in the process of standardization for PPP service, the corrections by each error source are transmitted in different transmission intervals, and the rate of change of each correction is transmitted together to compensate the time delay. Using these features of SSR correction is expected to reduce the performance degradation even if users do not receive the network RTK corrections for more than 30 seconds. In this paper, the simulation data were generated from 5 domestic reference stations in Gunwi, Yeongdoek, Daegu, Gimcheon, and Yecheon, and the network RTK and SSR corrections were generated for the corresponding data and applied to the simulation data from Cheongsong reference station, assumed as the user. As a result of the experiment assuming 30 seconds of missing data, the positioning performance compensating for time delay by SSR was analyzed to be horizontal RMS (about 5 cm) and vertical RMS (about 8 cm), and the 95% error was 8.7 cm horizontal and 1cm vertical. This is a significant amount when compared to the horizontal and vertical RMS of 0.3 cm and 0.6 cm, respectively, for Network RTK without time delay for the same data, but is considerably smaller compared to the 0.5 ~ 1 m accuracy level of DGPS or SBAS. Therefore, maintaining Network RTK mode using SSR rather than switching to code-based DGPS or SBAS mode due to failure to receive the network RTK corrections for 30 seconds is considered to be favorable in terms of maintaining position accuracy and recovering performance by quickly resolving the integer ambiguity when the communication channel is recovered.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.105-112
• /
• 2006

We intend to increase in eficiency of the topographic monitoring of seabed or riverbed by combinedwith DGPS, RTK GPS and echo sounder. For this study, we defined the error corection of the echo sounder with the experiment of water tank, which is considered the characteristic of estuary riverbedand then we developed the s/w for 3-dimensional monitoring of estuary riverbed and aplied the s/wto field test and improved the various problems. On analyzing topography of estuary riverbed by combinedby the movement of survey vessel to the end of the transducer was eliminated by geometrical rearangementand we defined the corection formula, . The sounding error about the echo sounder and characteristic of estuary riverbed was found by understanding the relation of average diameter and residual error and we defined corection formula, Y=-0.0474*ln(X) -0.045 by the regression analysis. and then we verified applicability of corection formula. This study that by Visual Basic must be useful applied in the topographic analysis of the estuary riverbed.