• 전기학회논문지
• /
• 제65권6호
• /
• pp.955-961
• /
• 2016

Fault location estimation is an important element for rapid recovery of power system when fault occur in transmission line. In order to calculate line impedance, most of fault location algorithm uses by measuring relaying waveform using DFT. So if there is a calculation error due to the influence of phasor by DC offset component, due to large vibration by line impedance computation, abnormal and non-operation of fault locator can be issue. It is very important to implement the robust fault location algorithm that is not affected by DC offset component. This paper describes an enhanced fault location algorithm based on the DC offset elimination filter to minimize the effects of DC offset on a long transmission line. The proposed DC offset elimination filter has not need any erstwhile information. The phase angle delay of the proposed DC offset filter did not occurred and the gain error was not found. The enhanced fault location algorithm uses DFT filter as well as the proposed DC offset filter. The behavior of the proposed fault location algorithm using off-line simulation has been verified by data about several fault conditions generated by the ATP simulation program.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.182-182
• /
• 2011

We investigated the adsorption structures of serine on a Ge(100) surface by core-level photoemission spectroscopy (CLPES) in conjunction with density functional theory (DFT) calculations. The adsorption energies calculated using DFT methods suggested that four of six adsorption structures were plausible. These structures were the "O-H dissociated-N dative bonded structure", the "O-H dissociation bonded structure", the "Om-H dissociated-N dative bonded structure", and the "Om-H dissociation bonded structure" (where Om indicates the hydroxymethyl oxygen). These structures are equally likely, according to the adsorption energies alone. The core-level C 1s, N 1s, and O 1s CLPES spectra confirmed that the carboxyl oxygen competed more strongly with the hydroxymethyl oxygen during the adsorption reaction, thereby favoring formation of the "O-H dissociated-N dative bonded" and "O-H dissociation bonded" structures at 0.30 ML and 0.60 ML, respectively. The experimental results were corroborated theoretically by calculating the reaction pathways leading to the two adsorption geometries. The reaction pathways indicated that the "O-H dissociated-N dative bonded structure" is the major product of serine adsorption on Ge(100) due to comparably stable adsorption energy.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1061-1066
• /
• 2009

Two fluoro-substituted 2-pyrazoline derivatives, 1-phenyl-3-(4-methoxyphenyl)-5-(4-fluorophenyl)-2-pyrazoline (1) and 1-phenyl-3-(4-methoxyphenyl)-5-(2-fluoro-phenyl)-2-pyrazoline (2) have been synthesized and characterized by elemental analysis, IR, UV-Vis and fluorescence spectra. The crystal structure of 1 has been determined by X-ray single crystal diffraction. For the two compounds, density functional theory (DFT) calculations of the structures and natural population atomic charge analysis (NPA) have been performed at B3LYP/6-311G** level of theory. By using TD-DFT method, electron spectra of 1 and 2 have been predicted, which are very approximate with the experimental ones. Comparative studies on 1 and 2 indicate that the location change of fluorine atom in 5-position phenyl ring of 2-pyrazoline does not make significant change of geometries and electronic transition bands, but it leads to evident change of atomic charge distributions and peak intensities of UV and fluorescence spectra.

• Coupled systems mechanics
• /
• 제6권3호
• /
• pp.369-376
• /
• 2017

Intermolecular interaction energies and conformer geometries of the hydrogen bonded acrylamide dimers have been studied by using the second-order Møller-Plesset (MP2) perturbation theory and the density functional theory (DFT) with 17 density functionals. Dunning's correlation consistent basis sets (up to aug-cc-pVTZ) have been used to study the basis set effects. The DFT calculated interaction energies are compared to the reference energy data calculated by the MP2 method and the coupled cluster method at the complete basis set (CCSD(T)/CBS) limit in order to determine the relative performance of the studied density functionals. Overall, dispersion-energy-corrected density functionals outperform uncorrected ones. The ${\omega}B97XD$ density functional is particularly effective in terms of both accuracy and computational cost in estimating the reference energy values using small basis sets and is highly recommended for similar calculations for larger systems.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3567-3570
• /
• 2014

The most stable adsorption structures and energies of four tautomers of 3-methyl-5-pyrazolone (keto-1, enol-1, keto-2, and enol-2) on Ge(100) surfaces were investigated using density functional theory (DFT) calculations. The enol-1, keto-2, and enol-2 tautomers, but not the keto-1 tautomer, were found to exhibit stable adsorption structures on the Ge(100)-$2{\times}1$ surface. Of these three adsorption structures, that of enol-2 is the most stable.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.215-215
• /
• 2011

The bonding configuration and adsorption stability of alanine and leucine adsorbed on Ge(100)-2${\times}$1 surface were investigated and compared using core-level photoemission spectroscopy (CLPES) and density functional theory (DFT) calculations. The bonding configuration, stability, and adsorption energies were evaluated for two different coverage levels. In both cases, the C 1s, N 1s, and O 1s core-level spectra at a low coverage (0.30 ML) indicated that the carboxyl and amine groups participated in bonding with the Ge(100) surface in an "O-H dissociated-N dative bonded structure". At high coverage levels (0.60 ML), both this structure and an "O-H dissociation bonded structure" were present. As a result, we found that alanine adsorbs more easily (lower adsorption energy) than leucine on Ge(100) surfaces due to less steric hindrance of side chain.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2265-2268
• /
• 2009

Terahertz time domain spectroscopy (THz-TDS) is applied in transmission to identify the five forms of modifications of furosemide and one commercial product from 0.3 THz to 1.6 THz at room temperature. The different absorption spectra of the different forms are sensitive to crystal structures. Density function theory (DFT) calculation was used to understand the vibrational modes of furosemide in the THz region. X-ray powder diffractometry (XRPD) was applied to confirm the different forms of modifications. The results demonstrate that THz-TDS is a potential analytical technique in investigating polymorphic forms in the pharmaceutical fields.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2927-2929
• /
• 2009

The hydricities of d$^6$ metal hydride complexes in aqueous solution were calculated by using density functional theoretical (DFT) calculations coupled with a Poisson-Boltzmann (PB) solvent model. Hydricity describes the hydride donor ability of the metal-hydrogen bond, which assists in the study of the mechanism of many catalytic processes and chemical reactions that involve transition metal hydrides. The calculation scheme produced hydricity values that were in good agreement with experimental estimation. The inclusion of a water molecule as a weakly bound ligand to five-coordinate metal complexes gave an improved correlation result.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권5호
• /
• pp.179-184
• /
• 2006

In a power system, an out-of-step condition causes a variety of risk such as serious damage to system elements, tripping of loads and generators, mal-operation of relays, etc. Therefore, it is very important to detect the out-of- step condition and take a proper measure. This paper presents a study on implementation of out-of-step detection algorithm using VHDL(Very high speed Hardware Description Language). The structure of out-of-step detection algorithm is analyzed for development of out-of-step detection relay on the FPGA(Field Programmable Gate Array). The out-of-step algorithm is separated to 4 parts: DFT IP, complex power calculation IP, out-of-step detection IP, control unit. Each parts are developed and simulated by using VHDL.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.111-124
• /
• 2013

Jianbo Wang의 그룹에서 최근 발표한 무촉매 분자 내 탄소-탄소 결합 형성 반응의 메커니즘을 계산 화학적으로 평가한다. 이 반응은 금속 촉매를 사용하지 않는다는 점과 Bio activity 를 갖는 Hydroxy-substituted Polycyclic Aromatic Compound (PAC)를 손쉽게 합성할 수 있다는 점에서 중요하다. Diazo moiety를 갖는 분자의 반응이 일반적으로 진행할 수 있는 세 가지 반응 경로가 제시되었고, DFT functional을 이용해 중간체 및 전이 상태에 대한 최적화 구조 및 에너지를 얻었다. 탄소-탄소 결합의 원천을 탐구하기 위해 Natural bond orbital charge calculation과 치환기 효과에 대한 계산이 수행되었다. 계산 결과, 중간체로 Triplet carbene을 형성하는 경로가 가장 불안정한 중간체를 형성했고, Tosylate가 해리되기 전 탄소-탄소 결합이 형성되는 경로가 가장 합리적인 반응경로임을 알 수 있었다.