• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.100-110
• /
• 2000

Studies were conducted to know effects of the bulking agents (saw dusts, mushroom waste, wheat bran coconut meal, rice hulls) adding o moisture control, fermentation methods (aerobic and anaerobic) and periods (1 to 20 days) of food waste fermentation for animal feeds on chemical compositions and in vitro DDM (digestibility of dry matter). Experiment designs were focussed basically to obtain extension service data. The NDF (neutral detergent fiber) composition in the oak and pine saw dust were 93.5% and 95.4% (DM basis) in respectively. Thus, the fermented food waste feeds using saw dust (50%) increased NDF(12%), and decreased in vitro DDM(48%) compared to those of raw materials before aerobic fermentation. The oak saw dust showed higher DDM compared to pine. Mushroom wastes which is a residues of mushroom culture mixed originally willow saw dust (80%) and wheat bran (20%) showed quite higher feed value compared to both saw dusts. It was found that an in vitro DDM and NDF composition in fermented feeds appeared highly dependent or the NDF composition in bulking agents. With an increase wheat bran ratio substitute mushroom waste showed linearly decreased NDF, and increased in vitro DDM in the fermented food waste feeds. The fermented feeds added bottling agents composed higher NDF resulted in higher NDF and lower in vitro DDM with prolonged fermentation time. The feeds from anaerobic fermentation appeared lower NDF and higher in vitro DDM compared to those of aerobic fermentation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.2
• /
• pp.99-104
• /
• 2015

This study was conducted to evaluate on agronomic characteristics, dry matter (DM) and digestible dry matter (DDM) yields of summer sowing sorghum hybrids (Sorghum bicolor (L) Moench) at Seongju in Gyeongbuk from 2013 to 2014. The experiment was arranged in randomized complete block design with three replications. Sorghum hybrids were seeded $31^{st}$ of July, 2013 and 2014. Sorghum hybrids were harvested on $3^{rd}$ November, 2013 and $5^{th}$ November, 2014. The observed average heading date was October 5, 8 and 9 for Sordan79, Sprint and SX17 respectively. The DM yield of 'SX17', 'Sordan79', and 'Sprint' was 24.2, 23,9 and 23.4 ton/ha, respectively and DM yield of those were significantly higher (p<0.05) than other three cultivars in 2013. DM yield of 'SX17', 'Sprint' and 'Sordan79' was 20.8, 20.0 and 19.3 ton/ha, respectively and DM yield of those was significantly higher (p<0.05) than other three cultivars in 2014. The DDM yield of 'SX17', 'Sordan79', and 'Sprint' was also higher (p<0.05) than other three cultivars in 2013 and 2014. ADF content of sorghum hybrids was low, whereas DDM was high. The results of this study indicated that traditional sorghum-sudangrass hybrids ('SX17', 'Sordan79') and sudan grass-sudangrass hybrid ('Sprint') than late flowering sorghum-sudangrass hybrid ('PACF8350') and sorghum-sorghum hybrids ('SS405', 'Sugar grazer') would be recommended for DM and DDM yields in the southern Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.2
• /
• pp.81-86
• /
• 2014

This study was conducted to evaluate the effect of different seeding dates on agronomic characteristics, forage quality, dry matter (DM) and dry matter digestible (DDM) yields of sudangrass hybrid (Sorghum bicolor(L.) Moench) and oat (Avena sativaL.) at Seongju in Kyeongbuk from 2012 to 2013. The experiment was arranged in randomized complete block design with three replications. Sudangrass was seeded five times seeding dates of 10 days interval ranging from $1^{th}$ August to $10^{th}$ September in 2012 and 2013. Oat was seeded three times seeding dates of 10 days interval ranging from $20^{th}$ August to $10^{th}$ September in 2013. Sudangrass was harvested on $26^{th}$ October, 2012 and $2^{nd}$ November, 2013. Plant length and DM content decreased with delaying seeing date. The DM and DDM yields of sudangrass were higher (P<0.05) in first seeding date than all other seeding dates and decreased with delaying seeding dates (P<0.05). The DM and DDM yields of oat were higher (P<0.05) in first and second seeding dates than third seeding date. The results of this study indicated that early seeding of sudangrass would be a recommended than late seeding after $20^{th}$ of August, and late seeding of oat after $30^{th}$ August would be recommened for DM and DDM yields in the Southern Korea.

• Journal of Biomedical Engineering Research
• /
• v.35 no.5
• /
• pp.142-150
• /
• 2014

The key to model-based iterative reconstruction (MBIR) algorithms for transmission computed tomography lies in the ability to accurately model the data formation process from the emitted photons produced in the transmission source to the measured photons at the detector. Therefore, accurately modeling the system matrix that accounts for the data formation process is a prerequisite for MBIR-based algorithms. In this work we compared quantitative performance of the three representative ray-driven methods for calculating the system matrix; the ray-tracing method (RTM), the distance-driven method (DDM), and the strip-area based method (SAM). We implemented the ordered-subsets separable surrogates (OS-SPS) algorithm using the three different models and performed simulation studies using a digital phantom. Our experimental results show that, in spite of the more advanced features in the SAM and DDM, the traditional RTM implemented in the OS-SPS algorithm with an edge-preserving regularizer out-performs the SAM and DDM in restoring complex edges in the underlying object. The performance of the RTM in smooth regions was also comparable to that of the SAM or DDM.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.176-182
• /
• 2003

The fluorine-containing epoxy resin, 2-trifluorotoluene diglycidylether (FER) was prepared by reaction of 2-chloro-${\alpha}$,${\alpha}$,${\alpha}$-trifluorotoluene with glycerol diglycidylether in the presence of pyridine catalyst. Curing behavior of FER/DDM system was investigated using dynamic and isothermal DSC. Cure activation energy (Ea) was determined by Flynn-Wall-Ozawa's equation. The rheological properties of FER/DDM system were studied under isothermal condition using a rheometer. Cross-linking activation energy (Ec) was determined from the Arrhenius equation based on gel time and curing temperature. As a result, the chemical structure of FER was confirmed by FT-IR, $\^$13/C NMR, and $\^$19/F NMR spectroscopy. The cure activation energy of FER/DDM system was 55.4 kJ/mol and conversion and conversion rate were increased with the curing temperature. The cross-linking activation energy of FER/DDM system was 41.6 kJ/mol and gel time was decreased with the curing temperature.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.1
• /
• pp.82-99
• /
• 2016

This study was carried out to understand the regional contribution of Particulate Matter (PM) emissions from East Asia ($82^{\circ}{\sim}149^{\circ}E$, $18^{\circ}{\sim}53^{\circ}N$) to Seoul during high concentration period in February 2014. The Community Multi-scale Air Quality (CMAQ) version 5.0.2 with Decoupled Direct Method (DDM) was used to analyze levels of contributions over Seoul. In order to validate model performance of the CMAQ, predicted PM and its chemical species concentrations were compared to observations in China and Seoul. Model predictions could depict the daily and hourly variations of observed PM. The calculated PM concentrations, however, had a tendency of underestimation. The discrepancies are due to uncertainties of meteorological data, emission inventories and CMAQ model itself. The high PM concentration in Seoul was induced by stationary anticyclone over the West Coast of Korea during 24 to 27 February. The DDM in CMAQ was used to analyze the contributions of emissions from East Asia on Seoul during this PM episode. $PM_{10}$ concentration in Seoul is contributed by 39.77%~53.19% from China industrial and urban region, 15.37%~37.10% from South Korea, and 9.03%~18.05% North Korea. These indicate that $PM_{10}$ concentrations in Seoul during the episode period are dominated by long-range transport from China region as well as domestic sources. It was also found that the largest contribution region in China were Shandong peninsula during the PM event period.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.3
• /
• pp.123-128
• /
• 2019

Demineralized dentin matrix (DDM) has been used as a recombinant human bone morphogenetic protein-2 (rhBMP-2) carrier in many clinical trials. To optimize the clinical safety and efficacy of rhBMP-2 with DDM, efforts have been made to improve the delivery of rhBMP-2 by 1) lowering the administered dose, 2) localizing the protein, and 3) prolonging its retention time at the action site as well as the bone forming capacity of the carrier itself. The release profile of rhBMP-2 that is associated with endogenous BMP in dentin has been postulated according to the type of incorporation, which is attributed to the loosened interfibrillar space and nanoporous dentinal tubule pores. Physically adsorbed and modified, physically entrapped rhBMP-2 is sequentially released from the DDM surface during the early stage of implantation. As DDM degradation progresses, the loosened interfibrillar space and enlarged dentinal tubules release the entrapped rhBMP-2. Finally, the endogenous BMP in dentin is released with osteoclastic dentin resorption. According to the postulated release profile, DDM can therefore be used in a controlled manner as a sequential delivery scaffold for rhBMP-2, thus sustaining the rhBMP-2 concentration for a prolonged period due to localization. In addition, we attempted to determine how to lower the rhBMP-2 concentration to 0.2 mg/mL, which is lower than the approved 1.5 mg/mL.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.745-748
• /
• 2003

HLA-RTI is Middleware for the distribute simulation that developed in the US Department of Defense. This provides fast accomplishment speed and reliability than distribute simulation Middleware by transfer. However, DDM(Data Distribution Management) service is used as data filtering technology in the existing HLA-RTI. As for this, the problem that network traffic increases in data exchange between the mobility simulation objects is generated. it proposes applying agent technology to the mobility simulation object in order to solve these problems in this paper in this. And this paper applies that to practical simulation and analyzes performance between each data filtering technology with comparison.

• Composites Research
• /
• v.12 no.4
• /
• pp.71-78
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with diaminodiphenyl methane (DDM), diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work, the effect of aromatic amine curing agents. In contrast, the results show that the DGEBA/DDS cure system having the sulfone structure between the benzene rings had higher values in the conversion of epoxide, density, shrinkage (%), glass transition temperature, tensile modulus and strength, flexural modulus and strength than the DGEBA/DDM cure system having methylene structure between the benzene rings, whereas the DGEBA/DDM cure system presented higher values in the maximum exothermic temperature, thermal expansion coefficient, and thermal stability. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property and stem from the effect of the conversion ratio of epoxide group. The result of fractography shows that the each grain size of the DDM/DGEBA system with feather-like structure is larger than that of the DDS/DGEBA system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.4
• /
• pp.307-315
• /
• 1994

The object of this experiment was to suggest the suitahle N-P-K fertilization level for orchardgrass(0G)-red clover(RC) mixtures under the intensive system of short-term pasture utilization. The fields trials were conducted over 3-year period(1991-1993) to evaluate dry matter yield. botanical composition, chemical composition and CP, DDM yield on the N-P-K levels (0-0-0. 50-100-100. 100-150-150, 150-2OO-200. 200-250-250 and 300-350- 350kg/ha). With increasing level of N-P-K, the DM yield of OG in the OG-RC mixture were significantly increased(P< 0.05), however, that of RC was remarkably decrcawd(P