• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.109.1-109.1
• /
• 2010

Hybrid형 석탄액화 공정은 직접액화 (Direct Coal Liquefaction, DCL)공정과 간접액화 (Indirect Coal Liquefaction, ICL)공정으로 구성 되며, 공정의 경제성을 분석하기위하여 주요 제품 (디젤, 납사) 생산량이 50,000barrel per day (BPD)의 Hybrid형 석탄액화공정을 선정하고 공정에 적합한 검토기준을 세워 건설비용 및 매출액등을 산정하였다. 또한 석탄액화공정에 대한 중요 변수들의 가격 변동에 따른 민감도 분석을 실시하였다. 생산량을 기준으로 선정된 원료탄(Illinois #6 유연탄)의 사용하였을 때, 총 투자액은 $4,114,730,000 로 나타났으며, 고정비는 $93,610,000, 변동비는 $407,225,000으로 분석되었다. 경제성 분석결과 내부수익률 (internal rate of return, IRR)은 기본조건에서 11.48%로 나타났으며, 순현가(net present value, NPV)는 $526,478,000으로 나타났다. 원금상환 기간은 6.9년으로 나타났으며, 민감도 분석 결과 제품가격, 원료석탄가격, 건설비의 변동률 순서로 수익률에 변화를 주는 것으로 나타났다. 민감도가 가장 높은 제품 가격 25% 상승 시, IRR과 NPV는 각각 17.24%, $2,804,919,000로 나타났다.

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.73-81
• /
• 1997

In this paper, it is intended to present more reproducible and quantitative method for adhesion assemssement. In scratch test, micromechanical analysis on the stress state beneath the indenter was carried out considering the additional blister field. The interface adhesion was quantified as work of adhesion through Griffith energy approach on the basis of the analyzed stress state. The work of adhesion for DLC film/WC-Co substrate calculated through the proposed analysis shows the identical value regardless of distinctly different critical loads measured with the change of film thickness and scratching speed. On the other hand, uniaxial loading was imposed on DCL film/Al substrate, developing the transverse film cracks perpendicular to loading direction. Since this film cracking behavior depends on the relative magnitude of adhesion strength to film fracture strength, the quantification of adhesion strength was given a trial through the micromechanical analysis of adhesion-dependence of film cracking patterns. The interface shear strength can be quantified from the measurement of strain $\varepsilon$s and crack spacing $\lambda$ at the cessation of film cracking.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.195-202
• /
• 2002

An automated process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in the AutoCAD using a personal computer and are composed of four main modules such as input module, shape cognition and shape expression module, material diameter determination module and process planning module. The design rules and knowledges for the system are extracted from the plasticity theories, handbook, relevant reference and empirical knowledge of field experts. Generally, in forging, only front view is needed for expression of axisymmetric parts, but non-axisymmetric parts need front and plane view. At the plane, this system cognizes the external shape of non-axisymmetric, parts - number of sides of regular polygon and radius of a circle circumscribing the polygon of n sides. At the front view, the system perceives diameter of axisymmetric portions and height of primitive geometries such as polygon, cylinder, cone, concave, convex, etc.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.3
• /
• pp.155-163
• /
• 1993

Inclusion complexation of 1,7,21,27-tetraaza[7.1.7.1]paracyclophane (CPM 55) with 2,7-dihydroxynaphthalene (2,7-DHN) or 1,3-dihydroxynaphthalene (1,3-DHN) in pD 1.17 $DCl-D_2O$ solution was investigated by $^1H$ nuclear magnetic resonance spectroscopy (NMR) using 4,4'-dimethylaminodiphenylmethane (ACM 11) as an acyclic analog of CPM 55. In CPM 55-naphthalene derivative complex, alkyl protons located in the cavity of CPM 55 were shown to be subjected to anisotropic shielding and protons of naphthalene moiety shifted remarkably to upfield. However, in ACM 11-naphthalene derivative systems, chemical shifts for protons of both DHN compounds were not significant. The remarkable chemical shift changes suggested that the naphthalene moiety of 2,7-DHN or 1,3-DHN was included in the hydrophobic cavity of CPM 55 in aqueous solution. From the continuous variation plots of induced chemical shifts of 2,7-DHN, it was found that 2,7-DHN was included in the cavity of CPM 55 at 1:1 molar stoichiometry. Both computer simulation of a inclusion complex and strong upfield chemical shift changes of 2,7-DHN protons supported the conformation of pseudoaxial inclusion as the presumed geometry of the host-guest complex.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.6
• /
• pp.465-471
• /
• 1998

Diamond-like carbon (DLC) films have been prepared by means of the plasma enhanced chemical vapor deposition (PECVD) method using vertical-capacitor electrodes. The deposition rata in our experiment is relatively small compared with that in the conventional PECVD methods, which implies that the accumulation of the neutral $CH_n$ radicals on the substrates due to the gravitational movement may not contribute to the deposition of DLC films. The hardness and the transparency were measured as a function of the ratio of the partial pressure of $CH_4-H_2$ mixtures or the hydrogen contents of specimens. The coefficients of friction between DLC films and a $Si_3N_4$ tip measured by using a lateral force microscope are in the range of 0.024 to 0.033 which depend on the hydrogen contents in DLC, and the surface roughness depends mainly on the deposition rate. The optical gaps increase with increasing the hydrogen contents. DCL films deposited on Pt-coated Si wafers show the stable emission characteristics, and the turn-on fields are in the range of 11 to 20 $V/\mu$m.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2012

A 10-b 500 MS/s A/D converter (ADC) with a hybrid calibration and error correction logic is described. The ADC employs a single-channel cascaded folding-interpolating architecture whose folding rate (FR) is 25 and interpolation rate (IR) is 8. To overcome the disadvantage of an offset error, we propose a hybrid self-calibration circuit at the open-loop amplifier. Further, a novel prevision digital error correction logic (DCL) for the folding ADC is also proposed. The ADC prototype using a 130 nm 1P6M CMOS has a DNL of ${\pm}0.8$ LSB and an INL of ${\pm}1.0$ LSB. The measured SNDR is 52.34-dB and SFDR is 62.04-dBc when the input frequency is 78.15 MHz at 500 MS/s conversion rate. The SNDR of the ADC is 7-dB higher than the same circuit without the proposed calibration. The effective chip area is $1.55mm^2$, and the power dissipates 300 mW including peripheral circuits, at a 1.2/1.5 V power supply.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.137-142
• /
• 1999

The purpose of this study is to develope a CAD-based tool for rasterization of polygonal vector map in AutoCAD. To identity the layer property of polygonal entity with user-defined coordinates as topology, algorithm in processing entity data of selection set that intersected with scan line was used, and the layers were extracted sequentially by sorted intersecting points in data-list. In addition to the functions for querying and modifying topology, two options for mapping were set up to construct plan projection type and to change meshes' properties in existing DTM data. In case of plan projection type, user-defined cell size of 3DFACE mesh is available for more detailed edge, and topological draping on landform can be executed in case of referring DTM data as an AutoCAD's drawing. The concept of algorithm was simple and clear, but some unexpectable errors were found in detecting intersected coordinates that were AutoCAD's error, not the utility's. Also, the routines to check these errors were included in algorithmic processing. Developed utility named MESHMAP was written in entity data control functions of AutoLISP language and dialog control language(DCL) for the purpose of user-oriented interactive usage. MESHMAP was proved to be more effective in data handling and time comparing with GRIDMAP module in LANDCADD which has similar function.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.2
• /
• pp.93-104
• /
• 2013

Purpose : The purpose of this study is balanced exercise program according to the supporting surface any affect women's ability to balance high heels. Methods : This study subjects were normal 20 females in their twenties. They were divided into stable supporting surface(n=10), unstable supporting surface(n=10), and they exercised three times a week for 5 weeks. In order to compare the difference of balance, the subjects were measured before and after training. Balance was examined using the balance master 7.0 version systems. Results : 1. There was significant difference values between pre-exercise and post-exercise of unstable surface group on the FORM-EO and FORM EC of MCTSIB and all of Unilateral Stance variables. 2. There was significant difference values between pre-exercise and post-exercise of stable surface group on the mean EPE, mean MXE, and mean DCL of LOS. 3. There was significant difference values between pre-exercise and post-exercise of unstable surface group of the rhythmic weight shift. 4. There was significant difference value in the slow directional control of rhythmic weight shift between groups after exercise. Conclusion : Training on stable supporting surface group and unstable supporting surface group improve balance.

• International Journal of Computer Science & Network Security
• /
• v.22 no.9
• /
• pp.83-88
• /
• 2022

The main purpose of the study is to determine the key aspects of the public-private partnership system in the context of the economic development of the state. At first glance, the mutually exclusive interests of the state and business do not contribute to the development of common and agreed development goals. At the same time, ignoring the versatility of interests and the aggravation of the discussion regarding the two sides under consideration, the study of the theoretical foundations of the interaction between the public and private sectors of the economy allows us to draw the following conclusion: world economic theory from classical political economy to new institutionalism has a clear structured position on the ancient historical depth of existence of the form of partnerships Based on the results of the study, the main elements of the public-private partnership system in the context of the economic development of the state were identified.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.3
• /
• pp.347-357
• /
• 2023

United States Nuclear Regulatory Commission (U.S. NRC) specifies regulations on obtaining licenses and describes the technical position on the average waste concentration, also known as Concentration Averaging and Encapsulation Branch Technical Position (CA BTP); CA BTP helps classify blendable waste and discrete items and address concentration averaging. The technical position details are reviewed and compared in a real environment in Korea. A few cases of concentration averaging based on the application of CA BTP to domestic radioactive waste are presented, and the feasibility of the application is assessed. The radioactive waste considered herein does not satisfy the Disposal Concentration Limit (DCL) of the second-phase disposal facility while applying the preliminary classification. However, if CA BTP is applied when the radioactive waste is mixed with other radioactive waste items in a large and heavy container, it can be disposed of at the second-phase disposal facility in Gyeongju Repository. To apply the CA BTP of the U.S. NRC, it is necessary to investigate the safety assessment conditions of the US and Korea.