• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.340-345
• /
• 2003

In this paper, the ultrasonic attenuation coefficient was measured by variation of crack length for double-cantilever beam(DCB) specimen. The energy release rate, G, was obtained by the experimental measurement of compliance. The experimental results represents that the relation between crack length for the ultrasonic attenuation coefficient and energy release rate is increased proportionally. From the results of experiments, the measurement method of crack length by the ultrasonic attenuation coefficient was proposed and discussed.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2174-2183
• /
• 2000

In this paper, the evaluation method of interfacial fracture toughness to apply the fracture toughness was investigated in adhesively bonded joints of AI/Ced./A1. Four types of adhesively bonded double-cantilever beam(DCB) joints with the interface crack were prepared for the test of interfacial fracture toughness. The experiments to measure the interfacial fracture toughness were performed under the various mixed-mode conditions. The critical energy release rate, Gc, was obtained by the experimental measurement of compliances. From the experimental results, the interfacial fracture toughness for the mixed-mode specimens is well characterized by the energy release rate, and the method of strength evaluation by the interfacial fracture toughness was discussed in adhesively bonded joints.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1109-1114
• /
• 2003

The initial crack often occurs on the bonded interface and it is the general cause of the interface fracture. It is very significant to establish the measurement method of interfacial crack by applying the ultrasonic technology into the interface of bonded dissimilar materials. In this paper, the interfacial crack length was measured by ultrasonic attenuation coefficient in the Al/Epoxy bonded dissimilar materials of double-cantilever beam(DCB). The energy release rate, G, was obtained by the experimental and Ripling's equation measurement of compliance. The experimental results represent that the relation between interfacial crack length for the ultrasonic attenuation coefficient and energy release rate is increased proportionally. From the experimental results, a measurement method of the interfacial crack length by the ultrasonic attenuation coefficient was proposed and discussed.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.130-137
• /
• 2004

The ultrasonic attenuation coefficients were measured by interfacial crack length in the adhesive components of double-cantilever beam(DCB). The energy release rate, G, was obtained by the experimental measurement of compliance. The numerical analysis by the boundary element method(BEM) and Ripling's equation was investigated. The experimental results represent that the relation between interfacial crack length for the ultrasonic attenuation coefficient and energy release rate is increased proportionally. A measurement method of the interfacial crack length by the ultrasonic attenuation coefficient was proposed and discussed.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.386-393
• /
• 2004

In this paper, the ultrasonic attenuation coefficient was measured by variation of crack length for double-cantilever beam(DCB) specimen. The energy release rate, G, was obtained by the experimental measurement of compliance. The experimental results represents that the crack length for the ultrasonic attenuation coefficient and energy release rate is increases proportionally From the experimental results, we proposed a detecting method of the crack length by the ultrasonic attenuation coefficient and discussed it.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.41-47
• /
• 2020

비메모리 반도체 미세 Cu배선의 전기적 신뢰성 향상을 위해 SiN_x 피복층(capping layer)과 Cu 배선 사이 50 nm 두께의 Co 박막층 삽입이 계면 신뢰성에 미치는 영향을 double-cantilever beam (DCB) 접착력 측정법으로 평가하였다. DCB 평가 결과 SiN_x/Cu 구조는 계면접착에너지가 0.90 J/㎡이었으나 SiN_x/Co/Cu 구조에서는 9.59 J/㎡으로 SiN_x/Cu 구조보다 약 10배 높게 측정되었다. 대기중에서 200℃, 24시간 동안 후속 열처리 진행한 결과 SiN_x/Cu 구조는 0.93 J/㎡으로 계면접착에너지의 변화가 거의 없는 것으로 확인되었으나 SiN_x/Co/Cu 구조에서는 2.41 J/㎡으로 열처리 전보다 크게 감소한 것을 확인하였다. X-선 광전자 분광법 분석 결과 SiN_x/Cu 도금층 사이에 Co를 증착 시킴으로써 SiN_x/Co 계면에 CoSi₂ 반응층이 형성되어 SiN_x/Co/Cu 구조의 계면접착에너지가 매우 높은 것으로 판단된다. 또한 대기중 고온에서 장시간 후속 열처리에 의해 SiN_x/Co 계면에 지속적으로 유입된 산소로 인한 Co 산화막 형성이 계면접착에너지 저하의 주요인으로 판단된다.

• Composites Research
• /
• 제12권5호
• /
• pp.40-53
• /
• 1999

저속시험 및 약 11.4m/s까지의 고속시험을 받는 다방향 탄소섬유/에폭시 복합적층판의 층간파괴거동에 대해 양외팔보(DCB)시험편을 이용하여 연구했다. 모드I의 하중을 1.0m/s이상으로 가한 결과 하중-시간곡선에 동적효과가 발생하여, 시험속도에 비례하는 단순관게식으로 예상되는 것보다 더 큰 균열속도가 나타났다. 시험편 개구변위와 균열길이만을 사용하는 수정된 선형보해석식은 동적인 층간파괴에너지$G_{IC}$를 평가하기 위해 유효했다. 또한 굽힘탕선계수의 실측값은 시험속도의 증가에 다라 증가했는데, 이를 $G_{IC}$의 평가시에 고려했다. 시험속도가 1.0m/s까지 증가할 때, 균열개시 및 정지시의 $G_{IC}$값은 변화가 없었으나, 11.4m/s의 속도에서 최대 GIC값은 섬유가교효과의 증대로 크게 증가했다. 또한 초기균열길이가 길수록 고속시의 최대GIC값은 저하했다.

• 한국산업보건학회지
• /
• 제23권1호
• /
• pp.1-10
• /
• 2013

Objectives: The present study investigated the potential subacute toxicity of 1,4-dichlorobutane (1,4-DCB) by a 2-week repeated oral dose in male Sprague-Dawley rats. Materials and Methods: The test chemical was administered once daily by gavage to male rats at dose levels of 0, 74, 222, 667, and 2000 mg/kg/day for 2 weeks. All rats were sacrificed at the end of treatment period. During the test period, clinical signs, mortality, body weights, food and water consumption, urinalysis, hematology, serum biochemistry, gross findings, and organ weights were examined. Results: At 2000 mg/kg/day, treatment-related clinical signs, as evidenced by hypothermia, decreased locomotor activity, piloerection, lying on side, and prone position were observed. All the rats were found dead on test day 2. At 667 mg/kg/day, polyuria, suppressed body weight gain, food consumption, and spleen and thymus weights, and increased adrenal gland and liver weights were observed.Hematological and serum biochemical investigations revealed increases in the alanine aminotransferase, alkaline phosphataseand total bilirubinand decreases in the serum $Na^+$ level, white blood cell count and lymphocyte ratio. There were no treatment-related adverse effects in the 74 and 222 mg/kg/day groups. Conclusions: In the present experimental conditions, target organs were determined to be spleen, thymus,and liver. The no-observed-adverse-effect level was considered to be 222 mg/kg/day in male rats.

• 풍력에너지저널
• /
• 제14권3호
• /
• pp.83-90
• /
• 2023

The purpose of this study is to evaluate the inter-laminar fracture toughness characteristics of CFRP pultrusion spar cap materials reinforced with non-woven glass fabric. Test specimens were fabricated by the infusion technique. A non-woven glass fabric and artificial defects were embedded on the middle surface between two pultruded CFRP panels. Double cantilever beam (DCB) and End Notched Flexure (ENF) tests were performed according to ASTM standards. Fracture toughness and crack propagation characteristics were evaluated with load-displacement curves and delamination resistance curves (R-Curve). The fracture toughness results were calculated by compliance calibration (CC) method. The initiation and propagation values of Mode-I critical strain energy release rate value G_Ic were 1.357 kJ/m2 and 1.397 kJ/m2, respectively, and Mode-II critical strain energy release rate values G_IIc were 4.053 kJ/m2 for non-precracked test and 4.547 kJ/m2 for precracked test. It was found that the fracture toughness properties of the CFRP pultrusion spar-cap are influenced by the interface between the layers of CFRP and glass fiber non-woven.

• 수산해양기술연구
• /
• 제19권1호
• /
• pp.79-84
• /
• 1983

분극전위변화에 따른 고역 내식성 알미늄합금(5083)의 SCC 거동을 연구 검토한 결과를 요약하면 다음과 같다. 1. 5083 알미늄합금의 K 하(IC)은 134.81~148.38kg/mm 상(3/2)이며, 전위변화에 따라 K 하(Ii)은 75.92~145.78kg/mm 하(3/2)이다. 2. K 하(I)-V의 거동은 양분극시 Region I 과 II가 나타나고, K 하(Ii)/K 하(IC)의 비가 작을수록 crack성장속도도 빠르게 나타난다. 3. 분극전위 -987mV SCE에서 crack성장속도가 가장 지연되므로 122mV SCE을 음분극하면 SCC 방지효과를 얻을 수 있을 것으로 생각된다. 4. 입계의 $\beta$상의 석출은 분극전위가 클수록 크게 나타난다.