• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.317-320
• /
• 2000

This paper proposes a voltage compensation method to improve the control performance of B4 inverter which is studied for low-cost drive systems. The B4 inverter employs only four switches and it has a center-tapped connection in the split dc-link capacitors to one phase of a three-phase motor. In the B4 topology unbalan-cd three-phase voltages will be generated by the dc link voltage ripple. To solve this problem we present a voltage compensation method which adjusts switching times considering dc link voltage ripple. The proposed method is verified by simulation results,

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.333-337
• /
• 1999

This paper presents the DQ transfomation space space vector modulation method to devel control algorithm of distribu STATCON(STATic CONdenser) for line volt regulation, dc link voltage regulation harmonics compensation. The Performance an of a PI with ramp comparision and synchro reference frame current controller is carried Based on these analysis, the control perform are desirable to compensate the harmonics a regulate dc link and line voltage of Distrib line.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.466-467
• /
• 2010

Researches about DSTATCOM are mainly divided two parts, one is the calculation of the load-side average active power and dc-link capacitor average voltage, the other part is the current control. This paper proposes a calculation of dc-link capacitor average voltage using improved method instead of conventional method using LPF (low pass filter). Through the theoretical analysis and simulation under unbalance loads and non-linear load, the proposed method is verified.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.324-327
• /
• 1990

In this paper describes the feasibility study on a single-phase / three-phase voltage-fed inverter using 1GBTs, incorporating voltage-mode quasi-resonant DC Link and the instantaneous Sinusoidal Current tracking adaptive control implementation under zero voltage switching resfriction. The simulation and experimental results are shown here and discussed for single-phase voltage-fed and three-phase voltage-fed inverter in order to verify the new operating principle of the Inverter topology proposed here.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.246-247
• /
• 2017

단상 ac/dc, dc/ac 시스템의 경우, ac와 dc사이의 전력 불균형으로 인해 double line frequency ripple power가 발생한다. 이는 harmonic disturbance을 야기시킨다. 일반적으로 전력 리플을 줄이기 위하여 dc-link에 용량이 큰 전해 커패시터를 사용하는데, 용량이 큰 전해 커패시터는 높은 equivalent series resistance(ESR)을 가지며, 상대적으로 짧은 수명을 갖는 한계를 갖는다. 본 논문은 active power decoupling을 추가함으로써 전해 커패시터를 용량이 작은 필름 커패시터로 대체한 회로 구조를 제시한다. 그리고 dc-link 커패시터 선정방법, 설계한 제어기의 성능과 부하 변동에 따른 실험을 PSIM 시뮬레이션으로 확인하고 실험을 통해 검증한다.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.109-110
• /
• 2013

3-level 인버터에서 DC_Link와 각 leg의 스위치 간 라인에 존재하는 Stray inductance로 인해 스위칭 시 Voltage spike가 발생하게 된다. 3-level 인버터는 고전압, 대전력에서 주로 사용되기 때문에 Voltage spike로 인해 전력반도체 스위치에 순간적으로 큰 전압이 인가되어 정격 이하의 운전에서도 스위치가 소손되어 전체 시스템의 고장을 초래할 수 있다. 이와 같은 사고를 방지하기 위해 본 논문에서는 DC_Link 커패시터를 분할로 구성하여 Stray inductance를 균일하게 하고 전반적으로 최소화 하였다. Stray inductance는 Double Pulse Test 시뮬레이션 및 실험으로 확인하였다.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.14-20
• /
• 1997

Due to several advantages of Pulse Width Modulated(PWM) Converter, such as unity power factor with low-harmonics and energy regeneration, PWM converter has been widely used in industrial application. In every application of energy conversion equipment, the design and implementation must be carried out considering performance and cost. High quality with low cost is the best choice for energy conversion equipment. High dc link voltage can reduce inverter and motor side losses and system dimension compare to low dc link voltage. Analog controller can make PWM converter cheaper without considerable degradation of the performance than digital controller. This paper shows the simplified analog controller-for 600V dc link voltage using stationary reference frame control and the simulation results.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.429-431
• /
• 1994

A parallel resonant dc link inverter, one of the many resonant inverters, has some superior characteristics in camparision with other resonant inverters. But loss of the resonant oscillation and occurrence of high peak voltage in the resonant capacitor of these inverters are serious problems. In this paper, we investigate a control method for resonant dc link inverters which can overcome these problems. Experimental results are presented to show superior operation of the resonant dc link inverter using the proposed control method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.4
• /
• pp.281-285
• /
• 2018

An isolated feedback method for measuring the inverter DC-link voltage is proposed. This method provides a simple and economical solution to inverter control systems that use a flyback converter as a controller power supply. In the proposed method, data on the DC-link voltage are acquired when the primary side voltage appears on the secondary side of the flyback transformer, thereby eliminating the need to adopt an extra signal isolation method. To solve the non-synchronization problem between the flyback converter switching and main controller sampling, the external interrupt function of the micro-controller is used as a trigger signal for the A/D conversion.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.634_635
• /
• 2009

Large aluminium electrolytic capacitors are widely used in inverter systems for smoothing dc-link voltage. If capacitors in dc-link are deteriorated by ageing, dc-link voltage is fluctuated by lessened capacitance and their bodies are heated by raised ESR(equivalent serial resistance) and finally system faults can be occurred. In this paper, on-load ageing test method of electrolytic capacitor in inverter system is proposed and test results are shown.