• 전자공학회논문지SC
• /
• 제49권1호
• /
• pp.57-63
• /
• 2012

본 논문에서는 크로스 레귤레이션을 방지하기 위한 TM 방식 SIDO DC-DC 벅 컨버터의 스위치 트랜지스터 크기 계산 기법을 제안하였다. TM 방식 SIDO DC-DC 벅 컨버터는 DCM 동작으로 인한 인덕터 전류의 높은 첨두치와 추가된 스위치의 저항성분으로 인한 전압강하 때문에 크로스 레귤레이션이 일어날 수 있다. 이 문제점을 해결하기 위해 스위치 트랜지스터의 저항성분을 고려하여 스위치 트랜지스터의 크기를 계산하였고, 계산을 간단히 하기 위해 시간의 함수인 인덕터의 전류를 평균부하 전류로 대체하였다. 제안한 기법을 이용하여 2.8 V와 1.8 V의 독립된 두 출력을 내는 카메라 모듈용 SIDO DC-DC 벅 컨버터를 설계하였고, $0.35{\mu}m$ CMOS 공정을 사용하여 제작하였다. 제작된 컨버터는 스위칭 주파수 1 MHz와 부하전류 200 mA 에서 80.7%의 효율을 보였다.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.373-379
• /
• 2019

Nowadays, the IoT portable electronic devices have become more useful and diverse, so they require various supply voltage levels to operate. This paper presents a DC-DC buck converter with pulse width modulation (PWM) for portable electronic devices. The proposed step-down DC-DC converter consists of passive elements such as capacitors, inductors, and resistors and an integrated chip (IC) for signal control to reduce power consumption and improves ripple voltage with the resolution. The proposed DC-DC converter is simulated and analyzed in PSPICE circuit design platform, and implemented on the prototype PCB board with a Texas Instruments LM5165 IC. The proposed buck converter is showed 92.6% of peak efficiency including a load current range of 4-10 mA, 3.29 mV of the voltage ripple at 5 V output voltage for the supply voltage 12 V. Measured and Simulated power efficiency are made good agreement with each other.

• 전기학회논문지P
• /
• 제60권3호
• /
• pp.126-132
• /
• 2011

A conventional LDO(Low Dropout Regulator) uses one OPAMP and one signal path. This means that OPAMP's DC Gain and Bandwidth can't optimize simultaneously within usable power. This also appears that regulation property and settling time of LDO can't improve at the same time. Based on this idea, a proposed LDO uses two OPAMP and has two signal path. To improve regulation property, OPAMP where is used in the path which qualities DC gain on a large scale, bandwidth designed narrowly. To improve settling time, OPAMP where is used in the path which qualities DC gain small, bandwidth designed widely. A designed LDO used 0.5um 1P2M process and provided 200mA of output current. A line regulation and load regulation is 12.6mV/V, 0.25mV/mA, respectively. And measured settling time is 1.5us in 5V supply voltage.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.123-124
• /
• 2015

Recently interest on DC systems has been grown up extensively for more efficient connection with renewable energy. During the operation, there happens DC_link voltage variations. This paper focuses on the DC voltage stabilization applied in stand-alone DC microgrid to improve the system stability by keeping the voltage within limits. Batteries and a variable speed diesel generator cover the shortage of power after all available renewable energy is consumed. Load shedding or power generation reduction should automatically takes place if the maximum tolerable voltage variation is exceeded. PSIM based simulation results are presented to evaluate the performance of the proposed control measures.

• 대한전자공학회논문지SD
• /
• 제44권2호
• /
• pp.95-103
• /
• 2007

동적 전압 조절(Dynamic voltage scaling, DVS) 기법은 가장 효과적이면서 가장 잘 알려진 전력 관리 기법 중 하나이다. DVS가 효율적인 여유 시간(Slack time) 분배 방법, 전압 할당 방법 등 다양한 방면에서 연구되었지만, 전압 변경 가능 프로세서 이외의 장치들에 대한 영향은 제대로 연구되지 못했다. DC-DC 변환기는 오늘날 대부분의 내장형 시스템에서 내부 장치들을 위한 다양한 값의 공급 전압 생성 및 전압 안정화 기능을 제공하는 중요한 역할을 하고 있으며, 특히 공급 전압의 계속적인 변경이 필요한 DVS를 적용하기 위해서는 필수적인 구성 요소이다. 이 논문에서는 DC-DC 변환기의 전력 소모를 포함한 시스템의 에너지 소모에 대해 분석하고 이를 바탕으로 DC-DC 변환기를 포함하는 시스템 또는 이와 유사한 형태의 에너지 소모 특성을 가지는 시스템에서 에너지 소모를 최소화하는 새로운 에너지 최적 오프라인 DVS 스케줄링 알고리즘을 제안하고, 실험 결과를 통해 제안된 알고리즘이 어떤 종류의 설정에서도 기존의 DVS 알고리즘보다 더 적은 에너지 소모의 스케줄을 생성함을 보여준다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.372-374
• /
• 2006

This paper reported the experimental results of the 2 stage converter using a Buck converter and a soft switching dc-to-dc converter that employs two separate transformers. A 2 stage converter module is designed with the specifications of an 3.3V output voltage, 20A output current, 66W output power and 36-75V input voltage. A prototype converter module is successfully implemented within 85.2% efficiency and 3% voltage regulation for the entire input voltage range, thereby demonstrating its application potentials to future telecommunication electronics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.208-211
• /
• 2003

This paper presents an improved droop method of the high voltage DC power supply which minimizes the voltage droop of a parallel-connected power supply. Conventionally, the droop method has been used to achieve a simple structure and no-interconnections among the power sources. However, it has a trade-off between output voltage regulation and load sharing accuracy. In this paper, the droop is minimized with a current and droop gain control using steady-stage estimation. The proposed method can achieve both high performance voltage regulation and load sharing. Two 10kV, 100mA parallel power modules were made and tested to verify the proposed current-sharing method.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.238-245
• /
• 2007

This paper considers the problem of regulating the output voltage of a current doubler rectified asymmetric half-bridge (CDRAHB) DC/DC converter via fuzzy integral control. First, we model the dynamic characteristics of the CDRAHB converter with the state-space averaging method, and after introducing an additional integral state of the output regulation error, we obtain the Takagi-Sugeno (TS) fuzzy model for the augmented system. Second, the concept of parallel distributed compensation is applied to the design of the TS fuzzy integral controller, in which the state feedback gains are obtained by solving the linear matrix inequalities (LMIs). Finally, numerical simulations of the considered design method are compared to those of the conventional method, in which a compensated error amplifier is designed for the stability of the feedback control loop.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.850-852
• /
• 1993

A buck-boost zero current switched(ZCS) series resonant AC to DC converter for the DC output voltage regulation together with high power factor is proposed. A dynamic model for this AC to DC converter is developed and an analysis for the internal operational characteristics is explored. With the proposed control technique, the unity power factor and the DC output voltage regulation without a current overshoot can be obtained.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.265-270
• /
• 2007

Equal rating DC-DC converter modules can be connected in series at the input for circuits requiring higher input voltages and in parallel at the output for circuits requiring higher output currents. Since the converter modules may not be practically identical, closed loop control has to ensure that each module equally shares the total input voltage and the load current. A control scheme consisting of a common output voltage loop, individual inner current loops and individual input voltage loops have been designed in this work to achieve input voltage and load current sharing as well as load voltage regulation under supply and load disturbances. The output voltage loop provides the basic reference for the inner current loops, which are also modified by the respective input voltage loops. The average of the converter input voltages, which is dynamically varying, is chosen as the reference for input voltage loops. This choice of reference eliminates interaction among different control loops. Type II compensators and Fuzzy Logic Controllers (FLCs) are designed and compared through MATLAB based simulation and FLC is found to be satisfactory. Hence TMS320F2407A DSP based FLC is implemented and the results are presented which prove the superiority of the FLC developed for this research.