• 한국정보통신학회논문지
• /
• 제5권4호
• /
• pp.668-675
• /
• 2001

최근, 상업적인 pcs시스템은 매우 발전되어 있으며, 결국 차세대 이동통신은 멀티미디어 서비스를 제공하는 IMT-2000에 의해 실현될 것이다. 그러므로 , 새로운 형태의 수신 시스템 연구가 활발히 진행되고 있고, 이중하나가 Direct conversion 방식이다 Direct conversion은 차세대 이동통신 시스템에 필요한 저전력, 소형, MMIC, 저가에 적합한 방식이다. 이 시스템을 사용할 경우 DC-offset의 문제가 발생하게 된다. DC-offset은 시스템에서 주파수 합성기의 누설신호에 의해 원하는 신호의 증폭을 억압한다. 본 논문에서 DC-offset을 제거하는 방법에 대해 고려한다. DC-offset의 제거법에는 AC-coupling, 대용량 capacitor, DC-feedback loop, DC-free coding의 4가지 방법이 있다. 이중에서 AC-coupling법은 가장 간단하며, DC-feedback법은 최고의 성능을 가진다. AC-coupling법과 DC-feedback법을 HP사의 ADS를 사용하여 시뮬레이션 하였다.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.879-891
• /
• 2018

A bidirectional dc-dc converter is used in battery energy storage systems owing to the growing requirements of a charging and discharging mode of battery. The magnetic coupling of output or input inductors in parallel-connected multi modules of a bidirectional dc-dc converter is often utilized to reduce the peak-to-peak ripple size of the inductor current. This study proposes a novel design guideline to achieve minimal ripple size of the inductor current under bidirectional power flow. The newly proposed design guideline of optimized coupling factor is applicable to the buck and boost operation modes of a bidirectional dc-dc converter. Therefore, the coupling factor value of the coupled inductor does not have to be optimized separately for buck and boost operation modes. This new observation is explained using the theoretical model of coupled inductor and confirmed through simulation and experimental test.

• 한국광학회지
• /
• 제18권5호
• /
• pp.295-302
• /
• 2007

Rib 형태의 전송구조로 구성된 편광 무의존성 방향성 결합기(DC)와 다중모드 간섭결합기(MMI)의 설계특성을 종방향 모드 전송선로 해석법(L-MTLT)을 이용하여 정확하게 비교 분석하였다. 두 전송모드들의 결합특성에 의존하는 편향 무의존성 DC 소자를 이용하여 다중모드들의 결합과 간섭특성을 나타내는 MMI 결합기가 설계될 수 있음을 보였다. 또한, 편향 무의존성 DC와 MMI 소자들의 결합효율을 결합길이와 파장의 변화에 따라 자세하게 비교 분석하였다. 그 결과를 기반으로 광통신용 소자에서 필터로 널리 사용 가능한 Bragg 격자구조가 집적된 편향 무의존성 DC와 MMI를 설계하고 그 필터특성을 처음으로 비교 분석하였다. 분석결과, TE와 TM 모드들 사이의 결합길이가 같도록 설계한 DC는 MMI보다 편광 무의존성 필터링 특성에 있어서 더욱 좋은 성능을 나타냈다. 그러나, 편광무의존성 결합길이가 현저하게 작은 MMI가 DC보다 집적소자 소형화를 위하여 더욱 좋은 소자임을 보였다.

• 한국가시화정보학회지
• /
• 제9권4호
• /
• pp.22-27
• /
• 2011

In this study, we present methods of coupling a commercial code, ANSYS CFX, and the user Fortran codes for solving an unsteady electro-osmotic flow around a pair of electrodes, receiving DC, attached to the top and the bottom walls of a two-dimensional cavity. We developed a module of Fortran programs for solving the ion-transport equations as well as the Poisson equations for the potential to be used in coupling with the CFX. We present how the developed codes are applied to solving the transient DC electro-osmotic flow problem within a simple cavity. We also address various problems encountered during the development process and explain why such problems are raised.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.230-231
• /
• 2011

본 논문은 2011년 제주계통 한림변전소와 금악변환소 사이에 설치 예정인 ${\pm}80kV$ 60MW HVDC 시스템의 DC 가공선로를 기존의 AC 송전 철탑의 AC 선로와 병렬로 추가하여 운영할 때 선로 Coupling에 따른 정상상태 영향을 분석한 내용이다. 한림변전소와 금악변환소 사이 철탑 17개의 데이터를 기반으로 송전선로를 모델링함으로써 실제 데이터에 최대한 근접할 수 있도록 정확성을 도모하였으며, 모델링과 분석에 있어서 전자계과도현상 해석프로그램인 PSCAD를 이용하였다. 특히 AC 병렬 연계 유무에 따른 DC 전류 주파수를 비교함으로써 AC/DC Coupling의 영향을 분석하였으며 최종적으로 이에 따른 기본파 성분 제거에 필요한 DC 필터 설치 유무에 관한 결론을 도출하였다.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.14-19
• /
• 2011

The implemetation of the AC and DC lines on the same transmission tower is an economical and practical approaching that increase the power transmission capacity of an existing transmission corridor. But, In this case, Inductive and capacitive coupling between AC and DC lines on the same tower should be investigated in advance. According to the installation plan of ${\pm}80kV$ 60MW bipole HVDC in Jeju island, KOREA that will be commissioned until 2011, DC lines will parallely operate with 154kV 2 AC lines in existed 154kV AC 4 lines transmission tower. This paper presents the transient analysis results about the interaction between 154kV AC and 80kV DC lines in the same transmission tower.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.176-187
• /
• 2015

DC bias will cause abnormal vibration of transformers. Aiming at such a problem, transformer vibration affected by DC bias has been studied combined with transformer core and winding vibration mechanism use multi-physical field simulation software COMSOL in this paper. Furthermore the coupling model of electromagnetic-structural force field has been established, and the variation pattern of inner flux density, distribution of mechanical stress, tension and displacement were analyzed based on the coupling model. Finally, an experiment platform has been built up which was employed to verify the correctness of model.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.88-89
• /
• 2017

This paper investigates the design of multi-winding coupled inductor for minimum inductor current ripple in rapid traction battery charger systems. Based on the general circuit model of multi-winding coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor which corresponds to a minimum inductor ripple current becomes -(1/n-1), i.e. a complete inverse coupling without leakage inductance, as the steady-state duty ratio operating point approaches 1/n, 2/n, … or (n1)/n. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the steady-state duty ratio operating point approaches either zero or one.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.17-22
• /
• 2009

This study presents an investigation of the characteristics of piezoelectric sensors whose main utilization is to measure impact pressure. The piezoelectric sensors were tested from several points of view. Their characteristics were investigated for repeatability, the effect of the diameter, temperature effect, water purity, flush mounting, and AC and DC coupling. Out of these, it was revealed that the temperature effect is very significant. The characteristics of the AC and DC coupling are also very important in understanding the time history of the impact pressure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2515-2517
• /
• 1999

In this paper we analysis DC bus voltage stress at high line voltage and light load in $S^4$-PFC Isolated AC/DC converter with DC bus voltage feedback using coupling in transformer. In this converter, the principle of operation and the practical problems in the design are considered. Simulation and experimental results are presented to verify the operation and performance of the $S^4$-PFC converter with DC bus voltage feedback. Experimental sets are performed in the conditions; switching frequency 100 kHz, output of 5 V, 60W, and universal line input voltage.