• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.947-949
• /
• 1995

In this paper, model reference adaptive fuzzy controller (MRAFC) was proposed in order to overcome the difficulty of extracting rules and defects of the adaptation performance in the FLC. MRAFC comprised inner feedback loop consisting of the FLC and plant, and outer loop consisting of an adaptation mechanism which is designed for tuning a control rule of the FLC. A reference-model was used for design criteria of a fuzzy controller which characterizes and quantizes the control performance required in the overall control system. Tuning control rules of FLC is performed by the adaptation mechanism. For this, the fuzzy model for tuning the contorl rules is designed in accordance with the feature of error information. And DC servo motor was selected for case study of actual industrial plant and tested on various loads.

• 한국지능시스템학회논문지
• /
• 제22권1호
• /
• pp.36-41
• /
• 2012

본 논문에서는 자동물류운반시스템(AGV)에 사용되는 가감속 제어를 위한 속도 프로파일 기반의 가감속 위치제어를 DC 모터 실험을 통한 토크변화에 대해서 고찰한다. 속도 프로파일을 이용한 모터의 가감속 제어는 모터에 걸리는 부하를 줄임으로써 시스템의 무리한 구동을 방지하고 수명을 연장 시키는 장점을 가지고 있다. 체계적인 설계 구조를 갖는 상태 피드백 제어기를 이용하여 속도 프로파일을 이용한 가감속 제어 기반의 DC 모터의 위치제어와 단순 위치제어를 모의실험을 통하여 비교함으로써 토크 크기를 비교 관찰한다. 또한 CEM-IP-01의 카트 위치 제어 실험을 통하여 이를 검증한다.

• International Journal of Safety
• /
• 제5권2호
• /
• pp.6-11
• /
• 2006

The time delay in servo control on LonWorks/IP Virtual Device Network (VDN) is highly stochastic in nature. LonWorks/IP VDN induced time delay deteriorates the performance and stability of the real-time distributed control system and hinders an effective preventive and predictive maintenance. Especially in real-time distributed servo applications on the factory floor, timely response is essential for predictive and preventive maintenance. In order to guarantee the stability and performance of the system for effective preventive and predictive maintenance, LonWorks/IP VDN induced time delay needs to be predicted and compensated for. In this paper position control simulation of DC servo motor using Zero Phase Error Tracking Controller (ZPETC) as a feedforward controller, and Internal Model Controllers (IMC) based on Smith predictor with disturbance observer as a feedback controller is performed. The validity of the proposed control scheme is demonstrated by comparing the IMC based on Smith predictor with disturbance observer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.135-137
• /
• 2005

In servo system demanding precision dynamic characteristics, application of the Permanent Magnet Linear Synchronous Machines (PMLSM) has advantage of analysis convenience by simple geometry and thrust ripple reduction from the sinusoidal back electromotive force and excited stator. Therefore, this paper presents design of surface-mounted PMLSM with slotless iron cored stator according to coil turns to satisfy the rate thrust. Also, from dynamic analysis for servo application of manufactured motor with heavy mass, we offer accurate range of the DC link voltage and acceleration in rate speed. This is applied to speed reference profile considering system characteristics in total length of moving position.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 추계학술대회 및 정기총회
• /
• pp.71-74
• /
• 2002

본 논문에서는 유전알고리즘(GA)을 이용한 PID계수 자동조정기법에 관한 DC 서보 모터 속도 제어기 설계를 목적으로 한다. DC 서보 모터는 수많은 제어용 기계나 로봇 등의 응용분야에 사용되고 있고 이러한 분야에서 제어기 파라미터들의 선택이 사용자의 전문적인 지식을 요구하게 된다. 따라서 일반적인 공정 기술자들은 시행착오에 의해 제어기 파라미터들을 계속적으로 반복 조절해 나가야 한다. 이와 같이 동적 시스템의 변화나 외란에 대하여 파라미터 계수를 자동 조정해야 할 경우 유전알고리즘을 사용함으로써 보다 정밀하고 최적화된 파라미터 계수값을 추종함에 따라 그 성능을 높일 수 있다. 본 논문에서는 DC 모터의 동특성을 분석하여 얻은 동특성 모델링으로부터 응답 특성이 빠르고 속도 정밀도가 향상된 구동제어가 가능한 제어기를 설계하고 이를 PID제어기와 비교 평가하였다.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.39-46
• /
• 1991

In the VSS control, the trajectories with a conventional sliding surface have a reaching phase which is an interval from the initial state to the first touching of the sliding surface. Since the sliding mode control can not be realized in a reaching phase, the trajectories may be sensitive to the disturbances and parameter variations. A simple nonlinear sliding surface is proposed to improve the robustness in a reaching phase. The position control of a PM DC servo motor using a new sliding surface is carried out and is compared to the one using the conventional surface. The sliding mode occurs in entire trajectories with the proposed new sliding surface and the improved robustness is obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.548-551
• /
• 1991

The Sliding Mode Control of Variable Structure System is applied to robot manipulators or servo system for its merits of robustness to variable system parameters and disturbances. But Switching frequency of control input is excessively high during sliding mode operation. In this paper, a new control algorithm usings fuzzy logic is proposed to solve this problem. With the proposed algorithm, a dc motor speed control system has been simulated and the result shows expected performances.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.135-143
• /
• 1992

A novel sliding mode control with disturbance observer for position control of DC servo motor is presented. The conventional sliding mode controller changes the control structure depending on the state of switching surface and consequently, the control law is discontinuous and theoretically chatters at an infinite frequency. To overcome this problem in view of the practical implementation, the disturbance observer is used to compensate the effects of the parameter variations and the load disturvances. We can obtain the performance predetermined by the switching surface with continuous control law while the controlled system remains robust. The performance of the proposed controller with that of the conventional sliding mode controller through digital computer simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.497-499
• /
• 1997

The torque ripple is generated in brushless de motors due to phase commutation and cause undesirable vibrations in servo application. This paper presents a new method reduce the torque ripple of brushless dc motor in commutation period.

• 전기의세계
• /
• 제21권4호
• /
• pp.15-21
• /
• 1972

For the conventional DC machine, the armature MMF is negligible compared with field MMF except when the machine is under heavy load or transient conditions. During the motor starting or reversal, the transient armature current and corresponding MMF effect the flux density of each pole in the machine magnetic circuit. However, the circuit flux density is restored to normal values by the field winding MMF after the transient armature current dies in an electromagnetic DC motor. Permanent magnet servomotor have no field windings about the circuit poles to restore circuit flux density through the demagnetized part of each pole after the transient armature MMF dies, and portions of the magnetic circuit stay permanently demagnetized. Thus the problem of stabilizing a magnet pole piece under the influence of the transient armature current need attentions. This work present the recoil operation of the servomotor with PM poles in conjunctions with the influence of the armature reaction effect. The development of an analytical and quantatative study is presented for predicting the regime of the recoil operation under this condition.