• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.76-79
• /
• 1988

The sliding mode control in an effective method to eatablish robustness against parameter variation and disturbance. But. In sliding mode strategy, the control function is discontinuous on the hyperplane. However the discontinuous change in control structure caves the controller input to chaffer and gives non-zero steady state error. Consequently, a multiloop feedback control system supplemented by a complelmentary controller is used to improved the drive performence of a DC servo motor and reduce sensitivity to parameter variation, nonlinear effects, and other disturbances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.3090-3092
• /
• 2005

본 논문에서는 직류전동기의 속도 및 전류제어를 위하여 dSPACE 시스템을 이용하여 전류 궤환을 갖는 속도 제어시스템을 구현하였다 속도 및 전류제어기의 설계는 MATLAB/SIMULINK 프로그램을 사용하여 간편하고 손쉽게 구현하였으며 직류전동기 속도제어의 안정성과 응답성을 향상시킬 수 있었다. 직류전동기의 전류제어 및 속도제어는 DSP 보드와 dSPCE 시스템을 사용하여 수행하였으며, 속도의 궤환은 속도센서인 엔코더 펄스를 이용해서 QEP로 처리하였고 전류의 궤환은 전류센서인 홀센서를 통해서 A/D 변환기로 처리하였다. 제어기들은 각각 PI 속도제어기 및 PI 전류제어기를 설계하였고 시뮬레이션과 실험을 통해서 속도 및 전류 응답을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1420-1423
• /
• 1990

DC series motor has been widely applicated in industry due to many advantageous characteristics, such as high starting torque, easy construction of its controller, and cost economy, etc.. However, by high starting current, excessive surge voltage, and so on, many problems which could make engineers relinguish to use it are induced. In this paper, various protection methods for power circuit are discussed. Particularly, a new proposed snubber circuit which consists of two diodes, one capacitor, and a resistor increases the performance with respect to the suppression of the surge voltage. Furthermore, the plugging algorithm, by checking the armature current and voltage and controlling the field coil current, is designed and implemented. Also, these methods and algorithms were applicated in electric vehicle, and we could find its stability to be considerably improved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.958-959
• /
• 2008

This paper is proposed a high performance speed control of the Interior Permanent Magnet Synchronous Motor through the Neural Network SV-PWM. SV-PWM is controlled using Neural Network control. SV-PWM can be maximum used maximum dc link voltage and is excellent control method due to characteristic to reducing harmonic more than others. Neural Network control has a advantage which can be robustly controlled. Simulation results are presented to show the validity of the proposed algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.105-108
• /
• 1988

In this paper, a control system design method is proposed for DC motor drive. A state space model is used to control sysytem and for closed loop system the technique of pole assignment is applied. The control system is designed with state feedback theory and to improve the response further more feedforward theory is applied to control system. The microprocessor as a controller and the interfaces in the system are proposed. Digital simulation results for step changes in reference velocity and load torque are shown.

• KIEE International Transactions on Power Engineering
• /
• 제4A권3호
• /
• pp.152-158
• /
• 2004

The passive filter is economic and efficient in suppressing harmonics but it may cause resonance problems and its performance is constantly dependent on power system impedance or working conditions of loads. This paper presents the DSP (Digital Signal Processor)-based control system, which automatically controls the passive filter in order to solve these problems. The control system can automatically control the passive filter according to working conditions of loads and measured harmonics, reactive power, power factor and so on. Experimental results in the power system using the 100HP DC motor drive are presented in order to verify the performance of the control system.

• 대한전기학회논문지
• /
• 제44권4호
• /
• pp.447-452
• /
• 1995

In this paper a simple method of a position control for brushless DC motor is presented. For precise position control, a high performance torque controller is needed and a novel current control method is proposed. The current controller detects the uncommutating mode current for every 60.deg. (elec. angle) and controls it with PI controller. The current control loop includes the feedforward of back EMF and the feedforward of the neutral voltage between the neutral point of the inverter and the neutral point of the machine. In the position control, the acceleration pattern is calculated from the position reference. Then the speed trajectory is calculated from the acceleration pattern. The experimental results are presented to verify the proposed methods.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.193-195
• /
• 2007

This paper proposed a novel current measurement method for two-phase half-bridge inverter using single current sensor. The proposed method measures DC link input current and a phase current simultaneously and reconstructs each phase currents by simple calculation according to voltage vector. The commutation modes of two-phase half-bridge inverter is analized. The current sampling and reconstructing method is also presented. The proposed method is verified through simulation and experimental results on two-phase induction motor drive system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2438-2440
• /
• 2005

본 논문에서는 직류전동기의 속도 및 전류제어를 위하여 dSPACE 시스템을 이용하여 전류 궤환을 갖는 속도 제어시스템을 구현하였다. 속도 및 전류제어기의 설계는 MATLAB/SIMULINK 프로그램을 사용하여 간편하고 손쉽게 구현하였으며 직류전동기 속도제어의 안정성과 응답성을 향상시킬 수 있었다. 직류전동기의 전류제어 및 속도제어는 DSP 보드와 dSPCE 시스템을 사용하여 수행하였으며, 속도의 궤환은 속도센서인 엔코더 펄스를 이용해서 QEP로 처리하였고 전류의 궤환은 전류센서인 홀센서를 통해서 A/D 변환기로 처리하였다. 제어기들은 각각 PI 속도제어기 및 PI 전류제어기를 설계하였고 시뮬레이션과 실험을 통해서 속도 및 전류 응답을 확인하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.334-337
• /
• 2006

외과수술용 핸드피스는 현재 국내 외 병원에서 사용되고 있는 수술 장비 중 필수 보유 장비이다. 선진수술 기법인 인공관절대체수술 시 뼈(Bone) 절단, 다듬질, 구멍등 초섬세 가공을 목적으로 하는 기기이다. 기존의 공압식(Air Type)은 수술 시 많은 양의 질소(N2 Gas)가 소모됨으로써 질소탱크 보관에 많은 공간이 필요하고 잦은 교체를 필요로 한다. 또한 기계소음과 공압식 호스의 이동으로 시술자와 환자사이에 불편함이 발생하고 감염의 위험성이 있으므로 최근에는 충전식을 선호하고 있다. 이러한 이유로 기존의 공압식을 대체할 배터리형 외과수술용 핸드피스를 연구하게 되었다.