• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.104-113
• /
• 2015

This paper focuses on a temperature effects on a PV panel which has been installed in Thailand. The main objective is cleaning PV panels and reduce temperature of PV panel by water injects from waterway and experimental results of PV power what it is difference. This project is designed by PLC control system which water injects and control PV temperature, In addition, this project consists of hardware and software such as water pump, water injection and PLC control has been automatically and it can be control system manually. The automatic control system is working when PV temperature rises up over 45 degree Celsius after that the pumping machine would inject water to the surface of PV panels and it must be stop when the PV panel temperature comes down less than 45 degree Celsius. The result of actual experimental found that the control system has been done correctly under specify condition. The experimental has been shown electrical data before and after water injects on PV system found that the electrical power a bit increases and The energy has been taken from PV panel less than energy consumption equipment of control system which taken to operate the water injecting system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.192.1-192.1
• /
• 2010

Micro hydraulic turbines take a growing interest because of its small and simple structure as well as high possibility of applying to micro and small hydropower resources. The differential pressure exiting within the city water pipelines can be used efficiently to generate electricity like the energy generated through gravitational potential energy in dams. In order to reduce water pressure at the inlet of water cleaning centers, pressure reducing valves are used widely. Therefore, pressure energy is wasted. Instead of using the pressure reduction valve, a micro counter-rotating hydraulic turbine can be replaced to get energy caused by the large differential pressure found in the city water pipelines. In this paper, detail studies have been carried out to acquire basic design data of micro counter-rotating hydraulic turbine, output power, head, and efficiency characteristics on various number of runner vane. Moreover, the influences of pressure, tangential and axial velocity distributions on turbine performance are also investigated.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.18 no.2
• /
• pp.195-200
• /
• 2011

Purpose: The purpose of this study was to assess rates for handwashing adherence before and after nursing contact in intensive care units (ICU). Methods: The participants included 90 nurses working in intensive care units of an 800-bed university-affiliated hospital in Gyeonggi Province and 2000-bed university-affiliated hospital in Seoul. Time for handwashing was calculated using the average number of handwashings during an 8-hour day shift. Nursing contact was based on indications as defined by the Centers for Disease Control and Prevention (CDC, 2002). Data were analyzed using frequency, percent, t-test and ${\chi}^2$-test. Results: During an 8-hour day shift, the average number of times that hands were washed was 25.0. The rates were significantly lower before the nursing contact than after the nursing contact when it involved sectioning, observation or contact with a wound, cleaning enteric feeding bag, physical exam, use of gloves, or contact with contaminants. Conclusions: The results indicate that as handwashing rates were significantly lower before nursing contacts than after nursing contacts, there is need to develop strategies to address this deficiency in handwashing.

• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.315-317
• /
• 2017

We present the case of a 45-year-old man with a history of benzene exposure who developed splenic marginal zone lymphoma. For 6 years, he had worked in an enclosed space cleaning instruments with benzene. He was diagnosed with splenic marginal zone lymphoma 19 years after retirement. During his time of working in the laboratory in the 1980s, working environments were not monitored for hazardous materials. We indirectly estimated the cumulative level of past benzene exposure using job-exposure matrices and technical assumptions. Care must be taken in investigating the relevance of occupational benzene exposure in the occurrence of indolent B-cell lymphoma. Because of the long latency period and because occupational measurement data do not exist for the period during the patient's exposure, the epidemiological impact of benzene exposure may be underestimated.

• Korean Journal of Artificial Intelligence
• /
• v.5 no.2
• /
• pp.26-42
• /
• 2017

This study perceived that there are limits to prompt and accurate monitoring when an accident occurs and the correct information of egg production stage, such as the date of spawning, cleaning, and refrigerating cannot be identified, since eggshell codes using barcode only show numbers identifying a city and province and the name of producers. To fix this problem, this study partially suggested the RFID (Radio Frequency Identification) technology and IoT-based Connected System. The proposed system in this study shares data with related agencies as the system of agricultural and livestock product information runs as the main server, and the database information of the proposed system is provided by farmhouses, distributors, and sellers. Through various media such as a webpage or mobile application built to provide the relevant information, customers can search and obtain information about agricultural and livestock products they want. Since the information on an entire process is open to the public, information ranging from simple to clear, additional ones such as hazardous elements can be viewed.

• Journal of the Korean housing association
• /
• v.13 no.3
• /
• pp.1-9
• /
• 2002

Desolation of the earth due to environmental pollution is rising as a world wide problem and concern. At this point we need to look into the problem and set up a direction for the future. In order to reveal the change of garbage problems in our county's civil life, a researcher analyzed 369 garbage related articles from the first edition of Dong A Ilbo up to 1990. The following is the result of data from garbage related articles. It is organized by age and era(10 years). 1) Number of articles by year roses in 1921 after first publication of garbage problem article. In the 1930s, the number of articles drastically increased in 1937. From then on, the number of articles declined until early 1970s but roses again from 1978. 2) Yearly change in articles was a mere 1.2 columns in between 1920 to 1960. In the 1970's, relative importance increased and over 5 columns were published. Articles rose in the 1980s with over 3.4 and 5 columns. 3) The contents of the articles can be classified into cleaning problems, collecting and transporting, expenses, and recycling. Garbage disposal problems continued until the 1970s. Regarding garbage collecting problems, form of collecting container and location was discussed. Laws were revised after garbage disposal areas were discussed in the 1920s. Expenses were levied from the 1930s and rising cost and double charge problems were subjected. Garbage recycling began in the 1920s and continued until 1900s.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.6
• /
• pp.863-869
• /
• 2006

The behavior of submerged membrane bioreactor (SMBR) filtration systems utilizing rapid air backpulsing as a cleaning technique to remove reversible foulants was investigated using a genetic algorithm (GA). A customized genetic algorithm with suitable genetic operators was used to generate optimal time profiles. From experiments utilizing short and long periods of forward and reverse filtration, various experimental process parameters were determined. The GA indicated that the optimal values for the net flux fell between 263-270 LMH when the forward filtration time ($t_f$) was 30-37 s and the backward filtration time ($t_b$) was 0.19-0.27 s. The experimental data confirmed the optimal backpulse duration and frequency that maximized the net flux, which represented a four-fold improvement in 24-h backpulsing experiments compared with the absence of backpulsing. Consequently, the identification of a region of feasible parameters and nonlinear flux optimization were both successfully performed by the genetic algorithm, meaning the genetic algorithm-based optimization proved to be useful for solving SMBR flux optimization problems.

• Current Research on Agriculture and Life Sciences
• /
• v.12
• /
• pp.35-49
• /
• 1994

The Purpose of this study was to establish the belter residential environment in Apt. complex. In this study, the management consciousness of exterior space and the degree of satisfaction were investigated and analyzed on the GI-SAN Apt. complex in Taegu city. The data were obtained through the questionnaire survey about the exterior space of Apt. complex and analyzed by the SPSS/PC. The results of this analysis are as follow; The result of the image analysis were the cleanness factor and the arrangement factor, which have great influenced in residents image of exterior space. The dissatisfaction source of the management conditions were owing to the lake of management techniques and the discord of residents. The subject of management in the residents consciousness was the management office. In additionally, the management form by the residents were highly showed the cleaning and weeding. The main issues of their dissatisfaction about the exterior space was the lake of size, quantity of plants and rest space. The place of the most demand on management was investigated the children playground which was regarded to be the most damaged.

• Plant Journal
• /
• v.11 no.4
• /
• pp.38-46
• /
• 2015

중유를 연소하는 D 발전소 탈황설비는 운전시간의 경과에 따라 흡수탑 중간층에 석고가 쌓이고 가스분사 파이프 내에 경질석고 스케일이 부착됨으로써 발전설비 및 탈황설비의 정상적인 운전이 어렵게 된다. 흡수탑 내부에 발생된 스케일을 제거하지 않을 경우에는 탈황효율의 저하에 따른 SO2 배출농도의 증가로 발전가능 최대출력의 하향조정이 발생되고 나아가 발전정지를 초래한다. 스케일 제거를 위한 탈황설비 세정은 발전가능 최대출력의 하향조정이 발생하는 시점으로 결정할 수 있다. 본 연구에서는 탈황설비의 운전 자료를 분석하여 발전가능 최대출력의 하향조정이 발생되기 6주 전은 탈황설비 출구 SO2 농도값이 130ppm을 초과하고 동시에 흡수탑 차압은 380mmH2O을 초과하며, 직전 흡수탑 세정 이후 44주가 경과된 시점이 됨을 확인하였다. 그리고 흡수탑의 세정시기는 세정준비기간 6주와 발전가능 최대출력 하향이 발생되기 6주 전까지의 운전경과일수 44주를 더하여 직전 세정시점으로부터 50주가 경과된 시점임을 예측하였다.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.37-46
• /
• 2004

A performance analysis for newly being considered electric rail car office has been made in this study. The major purpose is to examine a proposed design in terms of its capacity and the proposed number of travels (82-84) per day. For this study we first examined the overall system configuration with detailed operational processes of cleaning and inspection. We then developed a simulation model using ARENA and designed input data from 12 selected factors and their interaction effects. A simulation run for each treatment combination of $L_{16}(2^{15})$ orthogonal array was run and 20 batch means were obtained. Through careful analyses of the results obtained, we drew a diversity of suggestions including the best factor level combination. Our confirmation experiments at the optimal level combination further validate the possibility of 82 runs and the consistency in the results.