• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.921-926
• /
• 2014

The aim of this study is to develop upper bodice pattern for obese girls aged 10~12 by using 3D virtual garment simulation system. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. The results of this study are as follows: First, by using 3D virtual garment simulation, new upper bodice pattern considered obese-schoolgirls was development. The basic numerical formula were as follows ; bust girth B/2+4.5, armhole depth B/4-1, waist girth W/4+0.5+dart amount, front chest width B/6+2, back width B/6+2, neck width B/12-0.5 and neck depth B/12+0.5. Second, armhole darts were added to compensate the loose amount of front armhole and dart manipulation was used to ensure a better appearance on armhole in the design. The dart side line was modified concavely to help cover the protruding stomach. Curved lines on the armhole were significantly relieved using dart manipulation and the darts side line was modified concavely to reduce the tightness around the front waist darts. Third, according to the results of the new upper bodice pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new upper bodice pattern was appropriate for the obese-schoolgirls. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1480-1484
• /
• 2004

In this paper, a self-propulsive and small concrete floor finishing trowel robot with twin trowels is proposed. Due to the small size and omni-directional moving capability, it is adequate for small space such as apartment. By adjusting the posture of trowels, it can move in any direction without wheels. We used cheap PIC processor for the cost saving design of the modules and adopted mode processors for easy operation of control stick. For the position control of the robot, we made a motion control algorithm appealing to the stepping motor driver module and the wireless communication module between the robot and PC (or control stick). In this paper, we discuss the control problem of the floor finishing robot in order to move to the right position. By comparing experimental result with simulation, we show the validity of the robot mechanism, sensors, and the control system.

• 한국인터넷방송통신학회논문지
• /
• 제8권5호
• /
• pp.229-234
• /
• 2008

XBRL은 기본적으로 XBRL 한국지부에서 개발한 KGAAP 2.1을 기반으로 기업들이 확장하는 구조로 정의되어 있다. 각 기업은 Taxonomy에서 자신의 업종을 선택하고 각 기업에 맞는 태그들을 확인하여 추가하여야 한다. 문서작성은 태그를 확장하는 등 복잡한 부분이 존재하여 태그확장, 데이터 입력의 단계를 거쳐서 작성해야 하는 어려움이 있다. 스타일의 표현방법은 XBRL기본적으로 제공하는 Presentation구조와 Label구조를 이용하여 표준을 제공하지만, XBRL Processor을 이용해야 하는 복잡한 문제가 있다. 금감원 (Financial Supervisory Service) (DART), 증권선물거래소(Korea Exchange)(KIND, KEDIS)의 전자공시 시스템은 SGML, XML, XBRL의Markup Language을 서식언어로 사용하고 있다. 각 언어의 특성에 따라 문서 정의 절차와 처리 방식이 다르게 나타난다. 본 논문에서는 각 전자공시 시스템의 서식언어에 따른 단계별 영향을 분석하고, 서식언어의 방향에 대해 연구한다.

• 대한가정학회지
• /
• 제45권1호
• /
• pp.111-125
• /
• 2007

By examining the existing Galot products in the market, we aimed to discover areas for new development and lay out the foundational system for establishing a database(DB) of their pattern grading. For the analysis, the team focused mainly on Galot in forms of casual korean traditional clothes, since they have the largest market share. The main accomplishments from this research are as follows. First, because adult females are the largest segment to consider in deciding the size system for grading, we selected three sizes that have to be compatible with the KS Clothing Standardized Sizing. Second, for basic pattern grading, we applied the reference size indicated in KS Clothing Standardized Size, and also used half dart sloper and dartless sloper. Third, we categorized designs according to the presence or absence of a dart, the structure of closure, and the shape of the sleeve and neck. We indicated the grading points with numbers and body area in Korean to make it easier for the users to understand when using the computer system and doing manual work. To further increase the user convenience, we provided diagrams for categorized designs, pattern grading layout, and a table for calculated grading points variation.

• 한국의류학회지
• /
• 제21권4호
• /
• pp.769-781
• /
• 1997

The purpose of this research is to show how to use the patternist's CAD system in order to make design patterns efficiantly. Using the PAD System Technologies company's PAD System Module, which is very officiant in designing patterns, the basic pattern or design pattern can be designed and applyed to the Sample Module, thus, then it could manufacture, retouch or choose a model, making it posible to go to the next level which is seam patterns for industrial use. By understanding the change of the design that is chosen through the design pattern making and Sample Module process', this study is presentated a plan on how to utilize the patternist's working adaption ability by the CAD system, and also considered the problems in using it. Ability of Design Confrontation of CAD System: 1) The result of an operation can be saved and retouched. On a saved list the patterns can be chosen and changed, thus, making it posible to complete a design very quickly. 2) When sewing every designed pattern in Sample Module, the model can be operated merely by selecting each sewing position, thus creating the same effect of a designer's muslin sample process in a much lesser time. Point at issue in the utilization CAD system: 1) When combining two darts into one place the amounts of darts that are already these have to be erasers, and then, the two darts points are moved that place, thus, containing them, which is very conplicated. 2) When making a gathering, because system can only be recognized in a opend line, the pattern should be separated in order to put a gathering inside a pattern. 3) In order to readjust the amounte of dart. The dart is erased first and then made new dart again. 4) When making tucks in a Sample Module, the form that gets narrow towards the pivot point can not be recognized so the sewing lines of the tucks is adjusted into parallel lines. 5) The Sample Module 3D operation can not attach the bodice to the shirts, instead they become fixed into each other. In the case of shoulder line tucks the amounts of pleats can not be expanded draperary naturally, thus, making it hard to showing the silhouette accurately. If these problems are solved, especially if the silhouette of a model can be created to have natural drapery in the 3D Module, models can be shown on the screen in possible to compare and examine even a change of a detail, by designing this 3D Module Production sample process will be more effective, thus, making the CAD system more useful in sewing design process.

• 복식문화연구
• /
• 제26권5호
• /
• pp.727-743
• /
• 2018

In this study, we used the 3D simulation program to create bodice patterns for adolescents boy students and analyze the fitting and air gap through 3D simulation. The purpose of this study was to select the bodice pattern method that best suited the body shapes of the adolescents male students. The subjects of this study were the French E pattern, Japanese N pattern, and Korean industrial L and J patterns. The applied size was the sixth Korean human body size survey data of 2010 Korea. The age range of the subjects was 13-18 years. DC Suite Program Ver. 5.1 was used, and SPSS 23.0 program was used for data analysis. As a result of comparing the shapes of the bodice patterns in the 3D simulation program, the E pattern had two waist darts on the front and one shoulder dart and one waist dart on the back, and the J and L patterns only had one dart on the back. The N pattern had no darts on either the front or back. As a result of examining the appearance evaluation of the pattern, air gap, color distribution, and clothing cross-section, the E pattern was evaluated as the closest to the body, and the N pattern was evaluated as the pattern with the largest allowance. The J pattern was evaluated as the best fit for body shape of the male adolescents. However, it is necessary to develop a pattern system by adding extra ease in setting the center front length.

• 한국해안·해양공학회논문집
• /
• 제27권6호
• /
• pp.391-405
• /
• 2015

본 연구에서는 원거리 지진해일에 대응하기 위한 기초 연구로써 유한 단층 모델과 순환 경계조건을 이용한 전지구 지진해일 예측 시스템을 제안하였다. 제안한 전지구 지진해일 예측 시스템을 2014년 칠레 지진해일에 적용하여 원거리 지진해일에 대한 대응 시스템으로써의 가능성을 검토하였다. 전지구 지진해일 예측 시스템의 경계조건, 지배방정식, 격자 크기, 단층 모델에 따른 지진해일 파고와 도달시각을 DART 부이, 조위관측소 관측 자료와 비교함으로써 유한 단층 모델과 순환 경계조건의 중요성을 확인하였다.

• 경영정보학연구
• /
• 제25권4호
• /
• pp.205-231
• /
• 2023

정보보호 관리체계(Information Security Management System, ISMS)는 정보 자산의 기밀을 유지하고 결함이 없게 하며 언제든 사용할 수 있게 하는 보호 절차와 과정이고, 국내의 ISMS-P와 국외의 ISO/IEC 27001이 가장 대표적인 ISMS 인증제도이다. 본 논문에서는 ISMS 인증과 조직의 특성과의 관계를 파악하기 위해서 한국인터넷진흥원(KISA), 과학기술정보통신부 전자공시시스템(ISDS), 금융감독원 전자공시시스템(DART)로부터 데이터를 수집하고, Probit 회귀 분석을 실시하였다. Probit 분석 시 ISMS-P 취득여부, ISO/IEC 27001 취득여부, ISMS-P와 ISO/IEC 27001 모두 취득여부의 세 가지 경우에 대해 독립변수 4개와의 관련성을 확인하였다. 분석 결과, ISMS-P, ISO/IEC 27001 모두 취득한 기업은 총 임직원 수와는 양의 상관관계, 업력과는 음의 상관관계가 있음을 알 수 있었다. 이외에도 ISMS-P 인증제도와 정보보호 공시제도의 개선방향에 대해서도 확인할 수 있었다.

• 한국의류산업학회지
• /
• 제6권6호
• /
• pp.756-764
• /
• 2004

The purpose of this study is to analyze of size and patterns of ready to wear basic for middle age women. For this purpose, I select 9 brands and analyze the basic skirts size system marketed in 2002 spring in Korea. To study the actual size system, I have compared size labeling, which I researched, with Korean Industrial Standard Size Chart. And I also have compared body measurement with the product size. To study the pattern, I have classified the composition of the skirt into 24 items. The different result shows between this study and Korean Industrial Standard Size Chart. The waist circumference is smaller than it should be, and the hip circumference is larger than it should be. As I have examined the body measurement and the product size, variability of the waist circumference depends on the location of the waistline. For the hip circumference, I have found that both the body measurement and the product size are same, or the product size is smaller than the body measurement. Both cases have been found to be over 67%. I have classified the analysis of the pattern into four components; circumference, relevance to waist line, dart, and length. For the waist circumference, the same size of the front and the back is 44.4%, and making the front larger is 44.4% also. In the hip circumference, the identical size of the front and the back is 66.7% and the larger size of back is 22.2%. Regarding darts placement, it is moved to the side lines from the middle of 1/2 of waist lines, dart intake was 1.3~3.2 cm, the length of darts is 7.2~12.7 cm.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.327-330
• /
• 2008

This paper shows an implementation of WLAN-based Audio/Video(A/V) system for multimedia home networks. Proposed WLAN-based A/V system can transmit multimedia data of high quality. The entire system consists of a 16-bit RISC controller, a program ROM, a SRAM, timers, an interrupt controller, a DART, GPIOs, an I2C and the OFDM modem supporting for the IEEE 802.11g standard. The simple MAC functions are implemented by firmware on an embedded 16-bit RISC controller. The OFDM modem supports a complete set of data rates up to 54Mbps. Proposed the system is implemented by an Altera FPGA EP1S60F1020C6 device, a 10-bit 2-ch DAC, a 10-bit 2-ch ADC and RF/IF chips.