• Korean Journal of Environmental Agriculture
• /
• v.13 no.1
• /
• pp.90-97
• /
• 1994

This experiment was conducted to improve the analytical method of tricyclazole- and IBP-combined dust. When the tricyclazole and IBP active ingadients were analyzed by the official analytical method, their recovery rates were 89.5 and 100%, respectively. A reason of the lower recovery rate in tricyclazole was found to be due to strong binding to the minor inorganic compoments, $Al_2O_3$, $Fe_2O_3$, CaO and MgO, of talc and kaoline. However, addition of 0.2% dimethylamine to extraction solvent for tricyclazole- and IBP-combined dust effectively raised the recovery rate of tricyclazole by providing higher basicity than tricyclazole. We have suggest an improved analytical method which is applicable to effective and simultaneous analysis of the active ingradients of tricyclazole- and IBP-combined dust.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.217-221
• /
• 1987

Two trial products of monogranular compound fertilizer for red pepper under vinyl mulching cultivatin were made using the principal sources of urea, diammonium phosphate and muriate of potash in combination with fillers of treated human wastes (product I) and zeolite (Product II). A field experiment was carried out to evaluate their effects on red pepper and the results obtained were as follows. Red pepper plant growth and total red fruit yields in the trial products of one time basal application were better and higher than those of NPK split application of contrl plot. The increases of yield in the trial products might be due to steady supply of nutrients for the entire growing period. Therefore, one time basal dressing of a developed monogranular compound fertilizer for red pepper was applicable under vinyl mulching cultivation.

• Microbiology and Biotechnology Letters
• /
• v.33 no.2
• /
• pp.90-95
• /
• 2005

An Actinomycetes producing an anti-VRSA (vancomycin-resistant Staphylococcus aureus) substance was isolated from soil. The cultural, morphological, physiological and phylogenetic analyses of an isolated strain were investigated for identification. Cultural characteristics based on ISP (International Streptomyces Project) were as follows: white aerial mycelium, yellow reverse side, and good growth on various medium. Also, the isolate did not produce the soluble pigment. Morphological characteristics were showed cylindrical spore chain and smooth spore surface by SEM (Scanning Electron Microscope). Physiological characteristics were showed LL-type by DAP isomer analysis and detected glycine, glutamic acid and alanine. A phylogenetic analysis of the 16S rDNA provided a clue that the isolated strain was actually a member of the genus Streptomyces, because the determined sequence exhibited a higher homology with Streptomyces echinatus. The isolate was identified to be a genus of Streptomyces sp.. The optimal culture conditions for the maximum production of anti-VRSA substance by Streptomyces sp. were attained in a culture medium composed of $2.0\%$ (w/v) glucose, and $0.4\%$ (w/v) yeast extract. The anti-VRSA substance was highly produced after 5 days of culture. Optimal pH and temperature conditions for the production of anti-VRSA substance were pH 7.0 and $28^{\circ}C$, respectively.

• Journal of Korea Foundry Society
• /
• v.15 no.5
• /
• pp.469-476
• /
• 1995

The effects of Cr, Mo or B additions were investigated on $B2{\leftrightarrow}DO_3$ structural transition temperature $(T_C)$ and mechanical properties of Fe-28at.%Al. The raw materials were arc-melted in vacuum and then subjected to the following heat-treatments to maximize the $DO_3$ ordered structure : $1000^{\circ}C/7days$, slowly cooled to $500^{\circ}C$ and then held for 5 days. In the effect on the grain refinment, the addition of alloying element B was the most effective. The addition of Cr or Mo had little effect. When 1at.%Mo was added, $T_c$ increase about $30^{\circ}C$, but Cr had a very little effect on $T_c$. On the contrary, when B was added, $T_c$ was apt to come down minutely. In the additional effect of alloying element on the mechanical properties, Cr was apt to decrease the microvickers hardness and yield strength, Mo and B didn't have much effect. In the case of compressure strength test, the effect of the environment on the yield strength was contrary to the result of the tensile strength test.

• Journal of Korea Foundry Society
• /
• v.23 no.1
• /
• pp.30-39
• /
• 2003

Porous hybrid preforms were fabricated by reactive sintering using the compacts consisting of SiC particles, Fe and Al powders. Squeeze casting processing was employed to produce the composite in which the matrix phase is Al-Si7Mg. The microstructural change and wear resistance of the composites were investigated in terms of an amount of SiC particles. The wear loss was increased with increasing the contact pressure in the alloy containing SiC particles coated with Cu. The most drastic change was found to the specimen tested at 2.5 MPa of contact pressure. Concerning the alloys containing SiC particles coated with Ni-P, a drastic increase in the wear loss exhibited at 2 MPa of contact pressure in those alloys containing 4 and 8 wt. % of SiC particles coated with Ni-P. In the alloy containing 16 wt. % a proportional increase in wear loss was observed to the change of contact pressure. With respecting to the sliding velocity, the wear loss of the alloy containing SiC particles coated with Cu increased at the initial stage of wear process and then decreased. Similar result was found in the alloys containing SiC particles coated with Ni-P. On the basis of the present results obtained, it was found that wear resistance of the alloys tested was improved to show in the order of the alloy reinforced by coated SiC particles > by uncoated SiC particles > by intermetallic compound without SiC particles.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.1
• /
• pp.24-27
• /
• 2009

N-doped ZnO thin films were deposited on n-type Si(100) and homo-buffer layer, and undoped ZnO thin film was also deposited on homo-buffer layer by RF magnetron sputtering method. After deposition, all films were in-situ annealed at $800^{\circ}C$ for 5 minutes in ambient of $O_2$ with pressure of 10Torr. X -ray diffraction shows that the homo-buffer layer is beneficial to the crystalline of N-doped ZnO thin films and all films have preferable c-axis orientation. Atomic force microscopy shows that undoped ZnO thin film grown on homo-buffer layer has an evident improvement of smoothness compared with N-dope ZnO thin films. Hall-effect measurements show that all ZnO films annealed at $800^{\circ}C$ possess p-type conductivities. The undoped ZnO film has the highest carrier concentration of $1.145{\times}10^{17}cm{-3}$. The photoluminescence spectra show the emissions related to FE, DAP and many defects such as $V_{Zn}$, $Zn_O$, $O_i$ and $O_{Zn}$. The p-type defects ($O_i$, $V_{Zn}$, and $O_{Zn}$) are dominant. The undoped ZnO thin film has a better p-type conductivity compared with N-doped ZnO thin film.

• The Korea Journal of Herbology
• /
• v.25 no.1
• /
• pp.65-74
• /
• 2010

Objectives : Achyranthis Bidentatae Radix (ABR) has been used for treating of many symptoms especially osteoporosis and rheumatoid arthritis. In this study, we determined the effects of water extract of ABR in RANKL (Receptor Activator for Nuclear Factor $\kappa$ B Ligand)-induced osteoclast differentiation culture system. Methods : We assayed mRNA expression levels of NFATc1, c-Fos, TRAP, OSCAR, $FcR{\gamma}$, DAP12 and GAPDH in bone marrow macrophages (BMMs) treated with ABR. The protein expression levels of NFATc1, c-Fos, MAPKs and $\beta$-actin in cell lysates treated with ABR were analysed by Western blotting. In addition we determined the effects of water extract of ABR on LPS-induced bone-loss mouse. Results : Water extract of ABR showed remarkable inhibition on RANKL-treated osteoclast differentiation without cytotoxicity. ABR down-regulated the induction of c-Fos and NFATc1 by RANKL. ABR suppressed phosphorylation of JNK, p38 and I-${\kappa}B$. ABR rescued bone erosion by LPS induction in vivo study. Conclusions : These results demonstrate that ABR may be a useful remedy for curing of bone-loss disease such as osteoporosis.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.78-86
• /
• 2009

A capacity calculation and process analysis is a very important part for the entire ship production planning. Ship's production plan is set up with a concept that the product is produced based on the capacity achievable by the processes while general manufacturing sets up the production plan based on product lead-time. Therefore, in case the calculation of capacity for each process of shipbuilding yard is different from actual conditions, a series of production plan - ship table composition, dual schedule plan and execution schedule plan, etc - may accumulate errors, lose reliability of planning information and cause heavy cost deficit in this course. In particular, in case of new shipbuilding yard, stocks between processes are built up and half blocks are not supplied in timely manner, and that is sometimes due to the clumsiness of the operator but it is more often because of the capacity to execute each process is not logically calculated. Therefore, this paper presents the process to calculate the assembly leadtime and assembly process capacity for shipbuilding yard assembly factory. This paper calculated the block type for calculation of assembly lead time based on block DAP(detailed assembly procedure), and introduced cases that calculate production capacities by assembly surface plate by considering the surface plate occupied area of the blocks that change depending on assembly field area and assembly processes through assembly simulation.

• Education of Primary School Mathematics
• /
• v.12 no.2
• /
• pp.81-97
• /
• 2009

Visual representations play an important role for students to understand the meaning of a given problem, devise problem-solving approaches, and implement them successfully. The purpose of this study was to investigate how 6th graders would use visual representations in solving mathematical problems and in what ways such use might affect successful problem solving. The results showed that many students preferred numerical expressions to visual representations. However, students who used visual representations, specifically schematic representations, performed better than those who employed numerical representations. Given this, this paper includes instructional implications to nurture students' use of visual representations in a way to increase their problem solving ability.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.680-689
• /
• 2019

Temperature effects on the generation of brake wear particles from railway vehicles were generated, with a particular focus on the generation of ultrafine particles. A real scale brake dynamometer test was repeated five times under low and high initial temperatures of brake discs, respectively, to obtain generalized results. Size distributions and temporal patterns of wear particles were analyzed through visualization using clustered heatmaps. Our results indicate that high initial temperature conditions promote the generation of ultrafine particles. While particle concentration peaked within the range of fine sized particles under both low and high initial temperature, an additional peak occurred within the range of ultrafine sized particles only under high initial temperature. The timing of peak occurrence also differed between low and high initial temperature conditions. Under low initial temperature fine sized particles were generated intensively at the latter end of braking, whereas under high initial temperature both fine and ultrafine particles were generated more dispersedly along the braking period. The clustered correlation heatmap divided particle sizes into two groups, within which generation timing and concentration of particles were similar. The cut-off point between the two groups was approximately 100 nm, confirming that the governing mechanisms for the generation of fine particles and ultrafine particles are different.