• 제목/요약/키워드: D314

검색결과 250건 처리시간 0.027초

Microbubble Column에 의한 인상흑연(鱗狀黑鉛)의 부선(浮選)에 관한 연구(硏究) (A study on Flotation of Crystalline Graphite by Microbubble Column)

  • 한오형;강현호
    • 자원리싸이클링
    • /
    • 제15권2호
    • /
    • pp.37-44
    • /
    • 2006
  • 국내 흑연광의 총 매장량은 약 260만 톤 정도이지만, 국제경쟁력을 가지지 못해 현재는 일부 광산에서만 채광하고 있다. 그러나 최근 휴대용 전자제품의 수요가 증가함에 따라 2차 전지의 전극에 사용되는 고순도의 흑연을 전량 고가로 수입에 의존하고 있어, 고순도 흑연의 국산화를 위한 연구가 필요한 실정이다. 그러므로 본 연구에서는 고순도 흑연을 생산하기 위한 전처리 단계로서 29.50% F.C.의 원광($D_{50}=69.393{\mu}m$)시료를 attrition mill에서 20분 마광($D_{50}=10.314{\mu}m$)하여 microbubble column을 이용하여 실험한 결과 정선과정 없이도 95% F.C. 이상의 산물을 90%이상의 회수율로 얻을 수 있었다.

KBP-750D의 출력 성능 및 하중 측정을 위한 계측장치의 구성 (Construction of measuring equipment for the power performance and load measurement of KBP-750D)

  • 전형원;길계환;박인수;김영찬;정진화
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.312-314
    • /
    • 2006
  • 포항공과대학교의 포항풍력에너지연구소(PoWER Center)가 개발에 참여했던 750kW급 직접구동형 국산화 풍력발전시스템(KBP-750D)은 그 개발이 완료되어 2005년 말경 대관령의 풍력실증단지에 설치되었고 현재는 시험운전이 수행되고 있다. KBP-750D의 상용화를 위하여 출력성능 및 하중측정을 통한 실증연구가 진행되고 있으며, 현재는 KBP-750D에 대한 출력성능 및 하중 측정을 수행하기 위하여 계측장치가 설치되어 시험 측정이 진행되고 있다. 본 발표에서는 풍력발전시스템에 설치된 계측장치의 구성 및 설치 결과를 상세히 보고한다.

  • PDF

대학생의 음주 및 흡연과 손가락 길이비(2D:4D) (Alcohol intake, smoking, and 2nd to 4th digit ratio of university students)

  • 김수일;김금숙;조근자
    • 한국산학기술학회논문지
    • /
    • 제13권9호
    • /
    • pp.3983-3990
    • /
    • 2012
  • 과도한 음주와 흡연은 인체에 유해하며, 다양한 영향요인들이 있다. 본 연구의 목적은 생물학적 요인인 손가락 길이비(2D:4D)와 음주 및 흡연과의 관계를 파악하는데 있다. 연구대상자는 대학생 435명(남자 121명, 여자 314명)으로 음주와 흡연 관련 설문에 응답한 후 복사기를 이용하여 손가락길이가 측정되었다. 연구 결과, 대학생들의 손가락 길이비는 남자 0.95, 여자 0.96으로 남녀 간에 유의한 차이가 있었다(p<0.001). 음주여부에 따른 손가락 길이비는 여자에서만 왼손에서 유의한 차이가 있었고(p<0.05), 흡연여부에 따른 손가락 길이비는 남자에서만 왼손에서 유의한 차이가 있었다(p<0.05). 음주 및 흡연과 손가락 길이비 사이의 관계는 왼손의 손가락 길이비가 낮을수록 음주량과 흡연량이 많은 것으로 나타났다(p<0.05). 결론적으로, 모체내 테스토스테론의 영향을 받는 손가락 길이비는 흡연 및 음주 선호와 상관관계가 있으므로, 음주와 흡연 예방프로그램이나 절주와 금연프로그램의 진행시 참여자의 손가락 길이비도 하나의 기초자료로 활용될 수 있을 것으로 사료된다.

광주기와 수온이 양식산 수컷 참조기(Larimichthys polyactis) 성성숙에 미치는 영향 (Effects of Photoperiod and Water Temperature on Male Sex Steroid Levels in Cultured Small Yellow Croaker (Larimichthys polyactis))

  • 김효원;김정현;박진우;백혜자;김대중
    • 생명과학회지
    • /
    • 제31권3호
    • /
    • pp.314-320
    • /
    • 2021
  • 본 연구는 환경요인이 성숙기 발달단계의 양식산 수컷 참조기(Larimichthys polyactis)의 성성숙에 미치는 영향을 알아보고자 광주기와 수온에 따른 GSI, 정소 발달 및 혈중 성호르몬 변화를 조사하였다. 실험 1 : 광주기를 자연광주기(Natural Photoperiod, NP, 10L:14D~11L:13D), 장일주기(Long Photoperiod, LP, 14L:10D), 단일주기(Short Photoperiod, SP, 10L:14D)로 설정하였고, 수온은 17℃로 설정하여 90일간 실험하였다. 그 결과, GSI는 실험 30일째와 60일째, 혈중 11-KT 농도는 실험 30일째에 LP 실험구에서 다른 실험구보다 유의하게 높게 나타났다. 실험 2 : 수온을 자연수온(Natural temperature, NT, 19.1~15.0℃), 17℃, 21℃, 25℃로 설정하였고, 광주기는 14L:10D로 설정하여 60일간 실험하였다. 그 결과, GSI는 실험 30일째와 60일째, 혈중 11-KT 농도는 실험 60일째에 25℃ 실험구에서 다른 실험구보다 유의하게 낮게 나타났다. 따라서 수컷 참조기는 단일주기(10L:14D)보다 장일주기(14L: 10D)에서 성성숙이 촉진되고, 25℃ 이상의 수온에서는 성성숙이 억제되는 것으로 생각된다. 이러한 결과는 참조기 번식생리학 연구를 위한 기초자료로 유용하게 이용될 것이라 기대된다.

벡터 인버터의 토크 제어를 이용한 연속공정 제어 시스템 개발 (Development of Continuous Process Control System Using Torque Controlled Vector Inverter)

  • 변성훈;정정윤;홍찬욱;김경서
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2010년도 하계학술대회 논문집
    • /
    • pp.314-315
    • /
    • 2010
  • This paper presents the design and development of Web control algorithm of continuous process control system using torque controlled vector inverter. Web algorithm used tension control with the tension sensor, and it is to calculate diameter of motor speed with maintain Web tension. The performance of Web control in this paper is verified by experiment.

  • PDF

설계민감도해석과 요소망 변형법을 이용한 전자소자의 3차원 형상최적화 (3D Shape Optimization of Electromagnetic Device Using Design Sensitivity Analysis and Mesh Relocation Method)

  • 류재섭;;고창섭
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제52권7호
    • /
    • pp.307-314
    • /
    • 2003
  • This paper presents a 3D shape optimization algorithm for electromagnetic devices using the design sensitivity analysis with finite element method. The structural deformation analysis based on the deformation theory of the elastic body under stress is used for mesh renewing. The design sensitivity and adjoint variable formulae are derived for the 3D finite element method with edge element. The results of sensitivity analysis are used as the input data of the structural analysis to calculate the relocation of the nodal points. This method makes it possible that the new mesh of analysis region can be obtained from the initial mesh without regeneration. The proposed algorithm is applied to the shape optimization of 3D electromagnet pole to net a uniform flux density at the target region.

Potassium dichromate에 대한 새뱅이 유생, 물벼룩 및 송사리 치어 급성독성 민감도 비교 (Comparison of Acute Toxicity Sensitivity of Potassium Dichromate to the Larva Neocaridina denticulata, Daphnia magna and the Juvenile Oryzias latipes)

  • 이재우;김경태;조재구;김지은;이재안;김필제;류지성
    • 환경생물
    • /
    • 제30권4호
    • /
    • pp.314-318
    • /
    • 2012
  • The aims of the present study were to estimate the possibility for toxicity test and compare acute toxicity of potassium dichromate in the larva stage of Neocaridina denticulata, Daphnia magna and the juvenile stage of Oryzias latipes. N. denticulate, a freshwater shrimp lives in Korea, is an indigenous species and considered to be useful for toxicity test. D. magna and O. latipes were recommended as a test species for the OECD test guideline. The 96 h-$LC_{50}$ potassium dichromate value was 0.62 mg $L^{-1}$ for the larva stage of N. denticulata and 168.44 mg $L^{-1}$ for the juvenile stage of O. latipes. The 48 h-$EC_{50}$ value was 1.27 mg $L^{-1}$ for the D. magna. The study was confirmed higher sensitivity of the larva stage of N. denticulata to potassium dichromate compared to the D. magna and the juvenile stage of O. latipes.

Device Physics of Low Temperature Poly-Si and Single Grain TFTs

  • Migliorato, P.;Yan, F.;Mo, Y.;Hong, Y.;Ishihara, R.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.309-314
    • /
    • 2004
  • Static and transient behaviour of Low Temperature Poly-Si TFTs (LTPS-TFTs) and Single Grain TFTs (SG- TFTs) are compared 3-D simulation is applied here for the first time to TFTs to account for the structure and twin boundaries in SG-TFTs.

  • PDF

역설계 (Reverse Engineering)

  • ;김왕도
    • 기계저널
    • /
    • 제33권4호
    • /
    • pp.311-314
    • /
    • 1993
  • 역설계란 제품에서부터 역으로 그것의 수학적인 형상을 얻는 기법이다. 생산현장과 설계분야에서 역설계의 응용사례는 많다. 예를 들면 자동차 외형설계자는 자유곡면(free form)을 만들고, 이것 에서 역으로 스템핑 다이(stamping die)를 가공한다. 물론 외형 설계자는 자유곡면을 생성하기 위해 스틸이나 커크사이트(kirtsite)보다는 원하는 형상을 만들기 쉬운 진흙을 사용한다. 생산부 서에서는 가공물의 설계도가 분실되거나 훼손되어 완성된 제품에서 도면이 복사되어야 할 경우가 생기게 된다. 역설계는 복제가 요구되는 어떤 형상도 적용이 가능하다. 응용대상은 특히 완구, 인조팔, 스템핑다이, 폼 블록(from block), 욕조기, 가구, 일상용품 등이며 적용대상은 광범위하다. 역설계는 설계자가 습득해야 할 필요기술이고, 현재의 CAD/CAM 적용영역을 새로운 세계로 확대시킬 것이다.

  • PDF